Product Image
Item Name
Price
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add:
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add:
The small Philips Head screws that secure the vent window assembly to the top and leading edge of the door window frame are notorious for seizing or...
$2.00 Add:
This is an original piece of glass for the fixed rear window. The same piece of glass was used for both sides; the Armourplate logo is reversed when...
$50.00 Add:
This is an original piece of glass for a front door. The same piece of glass was used for both sides; the Armourplate logo is reversed when viewed...
$50.00 Add:
$5.50 Add:
$49.00 Add:
Original lenses were clear, but if you have a strong suspicion that everybody is ignoring you because they think 'not orange' equals 'not indicator'...
$49.00 Add:
$49.00 Add:
Original lenses were clear, but if you have a strong suspicion that everybody is ignoring you because they think 'not orange' equals 'not indicator'...
$49.00 Add:
$35.00 Add:
$50.00 Add:
$50.00 Add:
$45.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
$18.00 Add:
$150.00 Add:
This is the O-ring seal between the Filler Tube and Tank. Suits RV1 - SV1
$16.00 Add:
To suit RV1/SV1
$48.00 Add:
Glove Box Hinge. Missing one screw clip. Some surface rust but still solid.
$32.00 Add:
$40.00 Add:
Quality Australian-made product
$108.50 Add:
$45.00 Add:
$4.50 Add:
Top and Bottom panels are in good condition. Couple of minor nicks to the middle panel. Good Colour. Needs new backing board.
$60.00 Add:
Good colour but there are some nicks to the middle panel. Needs new backing board.
$40.00 Add:
Rip around the door handle opening and lower panel. Backing board no good. Rough, hence price.
$30.00 Add:
Rough, apart from top panel. Faded too. Could be cleaned up for bash car. How desperate are you?
$25.00 Add:
Minor damage to top and bottom panels. A bit faded. Backing board needs replacement.
$40.00 Add:
Covered in primer overspray that can be cleaned off. Some damage to middle panel. Backing Board needs replacement.
$27.00 Add:
Covered in overspray and pretty rough. Would look better cleaned up and on a new board. Would also look better on fire. Damage to trailing edge of...
$25.00 Add:
To suit RV1/SV1 Quality digital print
$17.00 Add:
This kit is to suit the rebuild of the RV1-SV1 Master Cylinder
$45.00 Add:
$220.00 Add:
The ring and bracket that attaches the Oil Filter Canister to the engine block. This one has been chrome plated in the past but requires stripping...
$35.00 Add:
$20.00 Add:
$21.80 Add:
$22.00 Add:
This is an original piece of glass for a rear door. The same piece of glass was used for both sides; the Armourplate logo is reversed when viewed...
$50.00 Add:
$60.00 Add:
$60.00 Add:
Includes Bearing, Lock Collar and Rear Axle Seal. One set per wheel.
$86.00 Add:
$18.00 Add:
$150.00 Add:
$99.00 Add:
$52.00 Add:
$38.00 Add:
Salvaged Crossmember to suit R and S Series Valiant
$90.00 Add:
To suit RV1/SV1 Quality digital print
$16.50 Add:
This is an original piece of glass for the Driver's Side Rear Door. Technically you could use it for the passenger side rear door too since the glass...
$45.00 Add:
Salvaged Window Regulator to suit RV1/SV1 Driver's Side Front Door. Has been ultrasonically cleaned, regreased and tested. Includes linkage arm and...
$60.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Quality Wiper Spring to suit RV1 - SV1 only
$12.00 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273 Bonus storytime: Sometime in early/mid 2012 I went to see Geoff Dundon of Replacement Valiant...
$7.70 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$13.20 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$16.20 Add:
This item is a clutch pedal pad for RV1-VC and a brake pedal pad for RV1-SV1 and manual AP5-VC
$14.00 Add:
Whilst unfortunately not perfect due to being stored in damp conditions, this is perfect for a survivor car. Suits all models with Chrysler...
$72.00 Add:
This kit includes the ball and trunnion boot and the clamps required to fit it. Note: you may need a larger type if your running gear has been...
$50.00 Add:
Not currently available (I'm working on it)
$38.50 Add:
$65.00 Add:
$18.00 Add:
To suit all Slants from RV1 - VC with a Carter carburettor. Note that some AP5s have a Holley carburettor; these have the word 'Holley' cast into...
$103.00 Add:
To suit all RV1 - Early VC
$15.00 Add:
A pair of black gaskets to keep your door lock assemblies watertight. Note that you do not need to purchase these if you have already purchased the...
$8.00 Add:
This is the seal around the Filler Tube that screws to the Boot Floor. Steel insert as per factory.
$76.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is as...
$16.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is made...
$16.00 Add:
$5.00 Add:
Early model Master Cylinder. This is the type with the cover held down with the bolt, but it can be used to replace the type with the screw type lid,...
$220.00 Add:
$25.00 Add:
Canister type oil filter to suit RV1/SV1 Slant and AP6/VC V8
$25.00 Add:
Starter Relay to suit RV1 - VC Automatic
$27.50 Add:
Starter Relay to suit RV1 - VC Manual
$27.50 Add:
A50 Type Air Filter as used on all 225 RV1 - VC as well as most VH - VJ 215 and 245 with 1BBL Carter Carburettor
$24.50 Add:
Horn Switch Retainer Bush Set. There are the 3 little bushes that secure the horn switch. Set of 3
$6.60 Add:
Suits early Slant 6 blocks up to and including early VE. Includes: 3 x 1-5/8" and 1 x 2-1/8" brass cup welch plugs
$19.50 Add:
Includes all parts pictured (not sure if there should be more). Suits Slant and 273 up to VF EDIT: No longer includes springs
$16.00 Add:
$27.50 Add:
$74.50 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Electronic Coil Instructions
$390.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Instructions Your original coil will be reused
$340.00 Add:
Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70 Add:
$12.00 Add:
$12.00 Add:
Suits RV1 - VF Slant with original Goss Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant with Carter...
$80.00 Add:
$55.00 Add:
Kit to suit the rebuild of Australian Slant 6 Oil Pumps
$280.00 Add:
$110.00... more info
$340.00 Add:
$340.00 Add:
$340.00 Add:
$340.00 Add:
$340.00 Add:
Original Rope Type
$35.00 Add:
$320.00 Add: