Product Image
Item Name
Price
A50 Type Air Filter as used on all 225 RV1 - VC as well as most VH - VJ 215 and 245 with 1BBL Carter Carburettor
$16.50 Add:
This kit includes the ball and trunnion boot and the clamps required to fit it. Note: you may need a larger type if your running gear has been...
$50.00 Add:
Not currently available (I'm working on it)
$38.50 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$43.00 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add:
Suits all models except RV1.
$22.00 Add:
Two pin type to suit all models with Points; RV1 - VH
$8.80 Add:
$28.00 Add:
$50.00 Add:
$18.00 Add:
Suits both 3 and 4 Speed Gearboxes
$26.50 Add:
$20.00 Add:
Suits all models. Quality product made by an automotive OEM
$8.00 Add:
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00 Add:
$42.50 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50 Add:
This brake pedal rubber suits Auto only
$12.50 Add:
This brake pedal rubber suits Auto only. Original, minimal wear
$12.50 Add:
Includes 2 pairs to suit both front wheels
$44.00 Add:
Includes 2 pairs to suit both rear wheels. Suits all models up to late CL
$44.00 Add:
This is a set of 4 Brake Shoes to do both front brakes
$45.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add:
This item is a clutch pedal pad for RV1-VC and a brake pedal pad for RV1-SV1 and manual AP5-VC
$12.00 Add:
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50 Add:
$27.50 Add:
2-1/8", brass. Suits all 6 cylinder models
$5.00 Add:
To suit all Slants from RV1 - VC with a Carter carburettor. Note that some AP5s have a Holley carburettor; these have the word 'Holley' cast into...
$42.00 Add:
To suit AP5 with 1920 Holley models 2535 and 2536. This kit is often known as HY354 or HL04 Quality Australian Product
$47.00 Add:
To suit AP5 with 1920 Holley models 2767 and 2768. This kit is often known as HY385 or HL15 Quality Australian Product
$47.00 Add:
To suit AP5 with 1920 Holley models 2887 and 2888. This kit is often known as HY373 or HL14 Quality Australian product
$47.00 Add:
It takes a long time to enter 2000+ items into an e-store! In the meantime please consult this catalogue and call 043VALIANT to order! Auto...
$0.01 Add:
$9.00 Add:
To suit any Valiant 6 or Small Block. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. For cars producing up to 450HP at the...
$1,345.00 Add:
To suit any Valiant 6 or Small Block. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. For cars producing up to 300HP at the...
$980.00 Add:
To suit any Valiant engine. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. Rated to 365HP. May give a slightly heavier pedal...
$295.00 Add:
To suit any Valiant engine. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. Rated to 365HP. Includes Pressure Plate, Clutch...
$445.00 Add:
To suit Slant 6
$245.00 Add:
$22.00 Add:
$22.00 Add:
Set of 4 Clutch Pivot Bushes
$17.00 Add:
$13.50 Add:
Allows your Slant to use non-standard Clutch Kits, such as those designed for Hemi and V8 applications.
$75.00 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
This will suit AP5 and pre-1965 AP6 225
$22.00 Add:
This will suit AP5 and pre-1965 AP6 225
$26.50 Add:
$49.50 Add:
This will suit AP5 and pre-1965 AP6 225
$11.00 Add:
Sold as a pair with mounting hardware
$110.00 Add:
To suit all RV1 - Early VC
$7.70 Add:
To suit all models up to VE
$74.00 Add:
This will suit AP5 and pre-1965 AP6 225
$20.00 Add:
Suits AP5 - CM. Quality rubber product made by an automotive OEM. By buying directly from the factory we have managed to cut out the middleman and...
$1.65 Add:
This includes enough strip for the top and rear vertical channel. Does not include the piece that goes into the front vertical channel as this is a...
$27.50 Add:
This is the strip that goes in the channel between the front window and the front quarter window
$123,456.00 Add:
This includes enough strip for one complete rear door.
$27.50 Add:
NOTE: All front weatherstrips are the same, and can be used on the inner/outer and left/right of any AP5-VC front door. This is the Regal Version,...
$24.00 Add:
NOTE: All front weatherstrips are the same, and can be used on the inner/outer and left/right of any AP5-VC front door. This is the Standard Version,...
$24.00 Add:
NOTE: All rear weatherstrips are the same, and can be used on the inner/outer and left/right of any AP5-VC rear door. This is the Regal Version,...
$24.00 Add:
NOTE: All rear weatherstrips are the same, and can be used on the inner/outer and left/right of any AP5-VC rear door. This is the Standard Version,...
$24.00 Add:
Each kit is enough to do 2 handles
$10.00 Add:
This kit is to repair one hinge of the front or rear door. Suits all models except coupe.
$30.00 Add:
Includes keys x2, door barrels x2, barrel clips x2, and barrel seals. Note these are a direct replacement for Late VC - VG. They can be used in...
$55.00 Add:
A pair of black gaskets to keep your door lock assemblies watertight. Note that you do not need to purchase these if you have already purchased the...
$8.00 Add:
Correct woven type, for all four doors, aqua in colour
$400.00 Add:
Correct woven type, for all four doors, black in colour
$400.00 Add:
Correct woven type, for all four doors, blue metallic in colour
$400.00 Add:
Correct woven type, for all four doors, champagne in colour
$400.00 Add:
Correct woven type, for all four doors, copper/brown in colour
$400.00 Add:
Correct woven type, for all four doors, fawn/sand in colour
$400.00 Add:
Correct woven type, for all four doors, green/gold in colour
$400.00 Add:
Correct woven type, for all four doors, grey in colour
$400.00 Add:
Correct woven type, for all four doors, palomino in colour
$400.00 Add:
Correct woven type, for all four doors, red in colour
$400.00 Add:
Correct woven type, for all four doors, tan/beige in colour
$400.00 Add:
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one front door.
$33.00 Add:
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one rear door.
$33.00 Add:
To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Electronic Coil Instructions
$390.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Instructions Your original coil will be reused
$340.00 Add:
Heavier grade than the original. Old stock.
$15.00 Add:
$18.00 Add:
Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70 Add:
$99.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$30.00 Add:
Salvaged Front Door Window Glass, good condition with no scratches or chips. Can be posted or picked up from Camden, NSW.
$43.00 Add:
This door is straight but has rust along the lower edge of the door as pictured. This could be repaired with one of our panels but unfortunately, the...
$100.00 Add:
This door is straight but unfortunately has extensive rust on the inside. This is strange because the rust has only just started on the outside...
$90.00 Add:
This door appears to be rust free and straight aside from a slight bend to the leading edge, from it being opened too far perhaps. Easily fixed, and...
$180.00 Add:
$59.00 Add:
$59.00 Add:
$16.00 Add:
$16.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
$16.50 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. Can be posted or picked up from Camden, NSW.
$30.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00 Add:
$12.00 Add:
$12.00 Add:
Salvaged Front Windscreen, good condition with no scratches or chips. There is no way I'll be posting this but it can be couriered or picked up from...
$140.00 Add: