Product Image
Item Name
Price
Perfect condition. Even the backing board is good enough to re-use.
$65.00 Add:
Grubby but could be cleaned up. No nicks or damage to vinyl. Carpet in crap condition, could be dyed or replaced. Stainless trim is good.
$50.00 Add:
Good Condition, minor hole over armrest which will be mainly hidden by the armrest pad. Some overspray which can be cleaned off.
$40.00 Add:
$1.00 Add:
Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up
$1.75 Add:
To suit RV1 - VG Quality digital print
$19.00 Add:
These are the brackets used to mount the Front Sway Bar to the K-Frame
$25.00 Add:
These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Suits all models from AP5 to CM except VF/VG Hardtop. Sold individually.
$19.50 Add:
Suits VF - VG Hardtop
$9.00 Add:
Suits VF - VG Hardtop
$9.00 Add:
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70 Add:
Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00 Add:
Full kit that includes inner and outer metal sleeves
$84.00 Add:
To suit both ute and wagon
$36.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
To suit AP5 - VC Quality digital print
$14.00 Add:
$55.00 Add:
Suits all Slant and Hemi engines
$4.50 Add:
These original salvaged conical washers are to suit Slant and V8 engines.
$5.00 Add:
Unavailable as a factory-correct reproduction, these original salvaged washers feature the concave shape. Suitable for both Slant and Hemi
$5.00 Add:
This kit is to suit the rebuild of the AP5 - VC Screw Top Master Cylinder
$64.00 Add:
$185.00 Add:
I bought this with a 1950's car radio and wondered what it was. A completely sealed cylinder with something moving (not rattling, but moving like it...
$16.00 Add:
This will fit all Torqueflite transmissions from VF to CM. It can be used to replace the earlier one pin type, which is no longer available, with...
$55.00 Add:
NOS Wibroc Mirror Head, still in the box as pictured. Stainless is perfect since it still has the protective covering on it. Mirror has no foxing....
$50.00 Add:
Standard bulb as used in all number plate light assemblies
$1.00 Add:
Quality Ryco Z9
$12.00 Add:
Suits all models
$16.50 Add:
Kit to suit the rebuild of Australian Slant 6 Oil Pumps
$280.00 Add:
This door is 100% rust free but has a large dent on the upper inside panel. Aside from this it is straight with original paint and the stainless...
$150.00 Add:
This door is straight and 100% rust free. Crappy matt black spray can paint job is disguising possibly the nicest door you could ever hope to find....
$200.00 Add:
This door is straight but has one rust-through area on the inside and outside of the trailing edge as shown. Aside from this there are no other rust...
$100.00 Add:
$14.00 Add:
High temp plastic construction to suit 1/2" PCV Grommet
$12.00 Add:
To suit various models from AP5
$24.00 Add:
$110.00... more info
$340.00 Add:
$340.00 Add:
$340.00 Add:
$340.00 Add:
$340.00 Add:
Suits SV1, AP5 and 6 cylinder AP6
$124.00 Add:
Suits TorqueFlite 904
$18.50 Add:
$5.85 Add:
$11.00 Add:
$28.90 Add:
$17.50 Add:
$16.50 Add:
Standard Bulb used to light the Radio Dial and several other interior applications
$1.00 Add:
Sold as a pair, Single Piece Type
$25.00 Add:
$12.00 Add:
$99.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...
$55.00 Add:
Salvaged Rear Door Quarter Window Glass, good condition with no scratches or chips.
$38.00 Add:
Salvaged Rear Door Quarter Window Glass, good condition with no scratches or chips.
$38.00 Add:
Are your rear quarter window rubbers cracked? Of course they are; they have been baking in the sun for 5 decades. Here is a very rare find: second...
$60.00 Add:
Salvaged Rear Door Window Glass, good condition with no scratches or chips. Can be posted or picked up from Camden, NSW.
$43.00 Add:
Salvaged Rear Door Window Glass, good condition with no scratches or chips.
$45.00 Add:
Salvaged Rear Door Window Glass, good condition with no scratches or chips.
$45.00 Add:
Straight but unfortunately rusted out at the bottom on the inside and out. Minor rust starting under where trim strip was. Could be used in...
$60.00 Add:
Straight but extensive rust through on outer panel. Rust starting to take hold on leading seam. Repair this door with one of our lower section rust...
$110.00 Add:
Straight apart from minor battle scar. Rust is just starting on leading seam but very very minor as pictured, and how often would you see this after...
$150.00 Add:
Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic
$32.00 Add:
$6.50 Add:
$5.00 Add:
$4.50 Add:
$48.00 Add:
$45.00 Add:
$33.00 Add:
Quality Australian-made product
$33.00 Add:
Original Rope Type
$35.00 Add:
A straight door with some rust issues but not too far gone. Treatable rust on leading seam, and a small amount of rust through along door bottom. Fix...
$90.00 Add:
A straight and almost rust free door apart from a small dent (circled) on outer skin and a small amount of rust starting on trailing edge of window...
$150.00 Add:
Shame this door is so straight as it is completely rusted out at the bottom on the inside and out. You could save it, but in reality you would be...
$50.00 Add:
$99.00 Add:
$99.00 Add:
Salvaged Rear Quarter Window Glass, good condition with no scratches or chips. Can be posted or picked up from Camden, NSW.
$30.00 Add:
$68.00 Add:
Quality SuperPro polyurethane product. 4 bushes are supplied; enough to do 1 car
$45.00 Add:
Set includes enough to do one rear shock; 4x Washers and 2x Nuts
$19.00 Add:
Quality US-made product. Sold as a pair.
$155.00 Add:
Suits all models with 34mm dia front leaf spring bushes. Price is for 4 Bushes, enough for 1 car
$24.00 Add:
Suits all models with 34mm dia front leaf spring bushes. Price is for a pair; enough to do 1 car
$38.00 Add:
Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...
$20.00 Add:
Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...
$45.00 Add: