VC

The VC has the unusual distinction of being the only Valiant model that didn't closely resemble another Valiant model. In reality however, the VC was really an AP6 under the skin with some very clever restyling. Late production V8 models offered PBR DB1 front disc brakes as an option. The VC was notable for being the first Valiant exported to the UK, although they were given goofy-sounding names like 'Medium Saloon' instead of Valiant and 'Premium Safari Estate Car' instead of Valiant Safari V8. 65634 VCs were built before production ended in 1967



Product Image Item Name Price
Ring Set, Moly, 273, 0.060"

Ring Set, Moly, 273, 0.060"

$130.00

Add:

Piston Set, Cast, 273, 0.020"

Piston Set, Cast, 273, 0.020"

$1,100.00

Add:

Piston Set, Cast, 273, 0.030"

Piston Set, Cast, 273, 0.030"

$1,100.00

Add:

Piston Set, Cast, 273, 0.040"

Piston Set, Cast, 273, 0.040"

$1,100.00

Add:

Piston Set, Cast, 273, 0.060"

Piston Set, Cast, 273, 0.060"

$1,100.00

Add:

Main Bearings 273 / 318 / 340

Main Bearings 273 / 318 / 340

$65.00

Add:

Conrod Bearing Set, V8

Conrod Bearing Set, V8

$60.00

Add:

Camshaft Bearing Set, V8

Camshaft Bearing Set, V8

$50.00

Add:

Welch Plug Kit, V8

Welch Plug Kit, V8

Suits all V8 models. Includes: 1 x 1-1/4", 9 x 1-5/8" and 1 x 1-7/8" brass cup welch plugs, 1 x 3/8" NPT Pipe Plug, and 1 x 1/2" NPT Pipe Plug
$49.50

Add:

Welch Plug, 1-1/4"

Welch Plug, 1-1/4"

1-1/4", brass. Suits V8
$5.00

Add:

Welch Plug, 1-7/8"

Welch Plug, 1-7/8"

1-7/8", brass. Suits V8
$5.00

Add:

Camshaft Plug, V8

Camshaft Plug, V8

Early Conical Type
$6.60

Add:

Pipe Plug, 3/8" NPT

Pipe Plug, 3/8" NPT

3/8" NPT. Suits V8
$5.00

Add:

Pipe Plug, 1/2" NPT

Pipe Plug, 1/2" NPT

1/2" NPT. Suits V8
$5.00

Add:

Rear Main Seal, V8

Rear Main Seal, V8

Original Rope Type
$35.00

Add:

Clutch Kit, Standard, Exchange

Clutch Kit, Standard, Exchange

To suit Slant 6
$245.00

Add:

Clutch Kit, Heavy Duty

Clutch Kit, Heavy Duty

To suit any Valiant engine. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. Rated to 365HP. May give a slightly heavier pedal...
$295.00

Add:

Clutch Kit, Race Spec

Clutch Kit, Race Spec

To suit any Valiant engine. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. Rated to 365HP. Includes Pressure Plate, Clutch...
$445.00

Add:

Clutch Kit, 10" Street/Race 300RWHP

Clutch Kit, 10" Street/Race 300RWHP

To suit any Valiant 6 or Small Block. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. For cars producing up to 300HP at the...
$980.00

Add:

Clutch Kit, 10" Race Spec 450RWHP

Clutch Kit, 10" Race Spec 450RWHP

To suit any Valiant 6 or Small Block. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. For cars producing up to 450HP at the...
$1,345.00

Add:

Clutch Thrust Race (Throw-Out) Bearing Carrier

Clutch Thrust Race (Throw-Out) Bearing Carrier

Allows your Slant to use non-standard Clutch Kits, such as those designed for Hemi and V8 applications.
$75.00

Add:

Clutch Fork Adjuster Arm Cushion

Clutch Fork Adjuster Arm Cushion

$9.00

Add:

Spigot Bush

Spigot Bush

Quality Australian-made sintered bronze product. Suits all manual transmissions.
$11.00

Add:

Transmision Filter, Linkage Operated Transmission

Transmision Filter, Linkage Operated Transmission

To suit all linkage-operated 904 and 727 TorqueFlite transmissions
$14.00

Add:

Selector Seal, Post-966 Torqueflite

Selector Seal, Post-966 Torqueflite

To suit all TorqueFlite transmissions built after 1966
$5.50

Add:

Clutch Pivot Half Moon Bushes Set of 4

Clutch Pivot Half Moon Bushes Set of 4

Set of 4 Clutch Pivot Bushes
$17.00

Add:

Clutch Linkage Pivot Ball, Body Side

Clutch Linkage Pivot Ball, Body Side

$22.00

Add:

Clutch Linkage Pivot Ball, Bellhousing Side

Clutch Linkage Pivot Ball, Bellhousing Side

$22.00

Add:

Clutch Torque Tube Linkage Dust Seals Set of 2

Clutch Torque Tube Linkage Dust Seals Set of 2

Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00

Add:

Bellhousing Clutch Fork Dust Boot

Bellhousing Clutch Fork Dust Boot

Suits both 3 and 4 Speed Gearboxes
$26.50

Add:

Clutch Pushrod Firewall Boot

Clutch Pushrod Firewall Boot

$13.50

Add:

Rear Extension Housing Seal

Rear Extension Housing Seal

Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic
$32.00

Add:

Rear Extension Housing Seal

Rear Extension Housing Seal

Suits TorqueFlite 727, Borg Warner 4 Speed Manual
$27.00

Add:

Pump / Converter Seal

Pump / Converter Seal

Suits TorqueFlite 904
$18.50

Add:

Transmission / Gearbox Mount

Transmission / Gearbox Mount

To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...
$49.00

Add:

Selector Seal, Borg Warner 3-Speed & 4-Speed (Rear)

Selector Seal, Borg Warner 3-Speed & 4-Speed (Rear)

To suit Borg Warner 3 Speed Manual Gearboxes for AP5 - early VF and as a Rear Selector Seal for Borg Warner 4 Speed Manual Gearboxes
$6.00

Add:

Ball and Trunnion Joint Boot

Ball and Trunnion Joint Boot

Not currently available (I'm working on it)
$38.50

Add:

Front Wheel Bearing Kit

Front Wheel Bearing Kit

Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals
$29.00

Add:

Front Axle Hub Seal

Front Axle Hub Seal

Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70

Add:

Front Wheel Inner Bearing

Front Wheel Inner Bearing

$12.00

Add:

Front Wheel Outer Bearing

Front Wheel Outer Bearing

$12.00

Add:

Front Shock Absorber Upper Bush

Front Shock Absorber Upper Bush

$16.50

Add:

Front Shock Absorber Lower Bush

Front Shock Absorber Lower Bush

Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80

Add:

Lower Control Arm Bush Pair Urethane

Lower Control Arm Bush Pair Urethane

$27.50

Add:

Lower Control Arm Bump Stop, Urethane

Lower Control Arm Bump Stop, Urethane

Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00

Add:

Upper Control Arm Bush, Rubber

Upper Control Arm Bush, Rubber

$13.20

Add:

Upper Control Arm Bush, Polyurethane, Moog brand

Upper Control Arm Bush, Polyurethane, Moog brand

$17.00

Add:

Ball Joint, Lower, Right Hand

Ball Joint, Lower, Right Hand

Suits all models, excluding those fitted with solid disc brakes
$43.00

Add:

Ball Joint, Lower, Left Hand

Ball Joint, Lower, Left Hand

Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$43.00

Add:

Lower Ball Joint Rubber Boot

Lower Ball Joint Rubber Boot

An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70

Add:

Ball Joint, Upper

Ball Joint, Upper

Suits all models except RV1.
$22.00

Add:

Upper Ball Joint Rubber Boot

Upper Ball Joint Rubber Boot

If your Upper Ball Joints are fine but the rubber boot has perished, fit new rubber boots and save around $20 per side. Suits all models except RV1.
$3.85

Add:

Tie Rod End, R/H thread

Tie Rod End, R/H thread

Suits all Valiant models except R Series For R/H outer and L/H inner
$16.50

Add:

Tie Rod End, L/H thread

Tie Rod End, L/H thread

Suits all Valiant models except R Series For L/H outer and R/H inner
$16.50

Add:

Tie Rod End Rubber Boot

Tie Rod End Rubber Boot

If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer
$3.85

Add:

Idler Arm, Small Bolt Type

Idler Arm, Small Bolt Type

This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00

Add:

Idler Arm Bush, Small Bolt Type, Rubber

Idler Arm Bush, Small Bolt Type, Rubber

This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00

Add:

Idler Arm Bush, Small Bolt Type, Nolathane

Idler Arm Bush, Small Bolt Type, Nolathane

This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50

Add:

Radius Rod Bushes

Radius Rod Bushes

Sold as a pair, Single Piece Type
$25.00

Add:

Pitman Arm, AP6 V8 and VC

Pitman Arm, AP6 V8 and VC

To suit all VC models and V8 AP6
$55.00

Add:

Brake Shoe Set, Front

Brake Shoe Set, Front

Includes 2 pairs to suit both front wheels
$44.00

Add:

Brake Shoe Set, Rear

Brake Shoe Set, Rear

Includes 2 pairs to suit both rear wheels. Suits all models up to late CL
$44.00

Add:

Disc Pad Set

Disc Pad Set

Full set of pads to suit PBR DB1 disc brake setup as used on VC - VF
$75.00

Add:

Solid Front Disc Rotor

Solid Front Disc Rotor

$110.00

Add:

Slotted Front Disc Rotor, Right

Slotted Front Disc Rotor, Right

$150.00

Add:

Slotted Front Disc Rotor, Left

Slotted Front Disc Rotor, Left

$150.00

Add:

Caliper Kit

Caliper Kit

NOT CURRENTLY AVAILABLE Caliper Kit to rebuild one PBR DB1 caliper as found on VC - VF.
$36.00

Add:

Solid Disc Brake Caliper Shims

Solid Disc Brake Caliper Shims

PBR DB2163 Caliper Shims (pair)
$18.00

Add:

Master Cylinder Kit

Master Cylinder Kit

This kit is to suit the rebuild of the AP5 - VC Screw Top Master Cylinder
$35.00

Add:

Master Cylinder, Exchange

Master Cylinder, Exchange

$185.00

Add:

Brake Shoes, Front Set

Brake Shoes, Front Set

This is a set of 4 Brake Shoes to do both front brakes
$45.00

Add:

Front Brake Drum

Front Brake Drum

$99.00

Add:

Front Brake Hose for Drum Brakes

Front Brake Hose for Drum Brakes

Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$30.00

Add:

Front Brake Hose for Disc Brakes

Front Brake Hose for Disc Brakes

Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$30.00

Add:

Front Brake Hose Set for Disc Brakes, Braided

Front Brake Hose Set for Disc Brakes, Braided

Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front brake hoses for disc brakes. Hoses are made to your...
$110.00

Add:

Brake Hose Full Set, Braided, Drum Brakes

Brake Hose Full Set, Braided, Drum Brakes

Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00

Add:

Brake Hose Full Set, Braided, Disc Brakes

Brake Hose Full Set, Braided, Disc Brakes

Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00

Add:

Brake Shoes, Rear Set

Brake Shoes, Rear Set

This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00

Add:

Rear Brake Drum

Rear Brake Drum

$99.00

Add:

Rear Brake Hose

Rear Brake Hose

Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$30.00

Add:

Rear Brake Hose, Braided

Rear Brake Hose, Braided

Top quality hose, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...
$55.00

Add:

Wheel Cylinder, Front Right

Wheel Cylinder, Front Right

$38.50

Add:

Wheel Cylinder, Front Left

Wheel Cylinder, Front Left

$38.50

Add:

Rear Wheel Cylinder

Rear Wheel Cylinder

$22.00

Add:

Handbrake Cable, Front

Handbrake Cable, Front

$95.00

Add:

Handbrake Cable, Intermediate

Handbrake Cable, Intermediate

$39.00

Add:

Handbrake Cable, Rear

Handbrake Cable, Rear

Two required per car
$65.00

Add:

Handbrake Cable Connector Set

Handbrake Cable Connector Set

$38.00

Add:

Handbrake Cable Fixing Sleeve

Handbrake Cable Fixing Sleeve

$8.00

Add:

Handbrake Cable Bracket Retainer Clip

Handbrake Cable Bracket Retainer Clip

$0.50

Add:

Universal Joint

Universal Joint

To suit all Valiant models except those with Sure-Grip Limited Slip Diffs
$22.00

Add:

Ball and Trunnion Boot Kit

Ball and Trunnion Boot Kit

This kit includes the ball and trunnion boot and the clamps required to fit it. Note: you may need a larger type if your running gear has been...
$50.00

Add:

Rear Shock Absorber Set, Monroe Gas

Rear Shock Absorber Set, Monroe Gas

Quality US-made product. Sold as a pair.
$155.00

Add:

Rear Wheel Bearing Kit

Rear Wheel Bearing Kit

Includes Bearing, Lock Collar and Seal for 1 wheel.
$49.50

Add:

Diff Cover Plate Gasket

Diff Cover Plate Gasket

To suit all RV1 - Early VC
$7.70

Add:

Diff Cover Plate Gasket

Diff Cover Plate Gasket

To suit all Late VC - CM
$7.70

Add:

Diff Cover Plate Gasket

Diff Cover Plate Gasket

To suit all Late VC - CM Premium Nitrile for improved leak resistance
$25.00

Add:

Lowering Block Kit, 1"

Lowering Block Kit, 1"

Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00

Add:

Lowering Block Kit, 1.5"

Lowering Block Kit, 1.5"

Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00

Add:

Lowering Block Kit, 2"

Lowering Block Kit, 2"

Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00

Add: