Product Image
Item Name
Price
A very comprehensive gearbox rebuild kit including Layshaft
$185.00 Add:
To suit cars without air-con or heater
$40.00 Add:
To suit cars with air-con or heater
$40.00 Add:
$0.50 Add:
Quality Australian-made product
$84.00 Add:
Suits all VE-VF-VG models except Hardtop and VF-VG VIP
$85.00 Add:
Suits VIP only. Quality Australian-made product.
$84.00 Add:
This is the long one. Quality Australian-made product.
$93.50 Add:
This is the short one. Quality Australian-made product.
$84.00 Add:
$54.00 Add:
Headlight Switch Harness, viciously hacked out of cars wrecked back in the day when it wasn't worthwhile to carefully remove the whole wiring loom;...
$20.00 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High Beam Single Filament Single Beam
$22.00 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High/Low Sealed Beam
$22.00 Add:
7" (178mm) diameter to suit: AP5 AP6 VC VE VF VH VJ High/Low Sealed Beam
$20.00 Add:
To suit all VE-CM without a heater
$20.00 Add:
To suit all VE-CM fitted with a heater
$20.00 Add:
Hi Beam Dipper Switch to suit RV1 - VJ.
$16.50 Add:
$48.00 Add:
Horn Button, salvaged. Removed many years ago so plenty of life left in them yet. Guaranteed to work.
$48.00 Add:
Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM
$28.00 Add:
Salvaged, sold individually
$8.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
Re-key your doors and ignition to use the same key. Ignition Barrel is exact replacement for all models from RV1-VG. Door Barrels are exact...
$80.00 Add:
Suits all models from RV1 - VG
$22.00 Add:
For use with Ballast Resistor
$58.00 Add:
For use with Ballast Resistor only. Made in Japan
$39.00 Add:
$46.00 Add:
If your indicator refuses to cancel after turning a corner, chances are one of the tabs has broken off. A common problem which is easily fixed with a...
$25.00 Add:
Indicator Lens as found on the front and rear of various VC-VG models. Clear. Quality Australian-made product.
$40.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$14.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$20.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...
$20.00 Add:
Gasket to suit Indicator Lens as found on the front and rear of various VC-VG models.
$5.50 Add:
Indicator Lens as found on the front and rear of various VC-VG models. Orange.
$35.00 Add:
Salvaged condition; all have minor surface rust on stalk but knob is not cracked
$20.00 Add:
A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....
$7.00 Add:
Before ordering this product, please note: you may only need the Cancelling Cam, which is much cheaper! If you are having an issue such as the...
$122.00 Add:
Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs
$1.00 Add:
$22.00 Add:
New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different
$48.00 Add:
If your budget doesn't stretch to new handles but you'd still prefer to get out of your car without climbing through the window, why not get a random...
$5.00 Add:
New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different
$48.00 Add:
If your budget doesn't stretch to new handles but you'd still prefer to get out of your car without climbing through the window, why not get a random...
$5.00 Add:
$10.50 Add:
$1.00 Add:
Very rare Buffalo Grain VIP door trims (matching rear seat also available at time of printing). Overall in very good condition; with some work could...
$540.00 Add:
Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up
$1.75 Add:
To suit RV1 - VG Quality digital print
$19.00 Add:
These are the brackets used to mount the Front Sway Bar to the K-Frame
$25.00 Add:
These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Suits all models from AP5 to CM except VF/VG Hardtop. Sold individually.
$19.50 Add:
Suits VF/VG Hardtop. Chrome plated type with black felt
$6.00 Add:
Suits VF/VG Hardtop. Clear plastic type
$8.00 Add:
Suits VF - VG Hardtop
$9.00 Add:
Suits VF - VG Hardtop
$9.00 Add:
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70 Add:
Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00 Add:
Full kit that includes inner and outer metal sleeves
$84.00 Add:
To suit ute and wagon
$55.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
To suit VE - VF Quality digital print
$17.00 Add:
$55.00 Add:
Clevite brand
$80.00 Add:
Suits all Slant and Hemi engines
$4.50 Add:
These original salvaged conical washers are to suit Slant and V8 engines.
$5.00 Add:
Unavailable as a factory-correct reproduction, these original salvaged washers feature the concave shape. Suitable for both Slant and Hemi
$5.00 Add:
Salvaged Master Cylinder Fluid Sensor; untested but will be replaced free of charge if DOA.
$20.00 Add:
$82.00 Add:
$62.00 Add:
Reconditioned Master Cylinder to suit models with front disc brakes and rear drum brakes. Send us your old unit and get a reconditioned unit back...
$245.00 Add:
Reconditioned Master Cylinder to suit models with drum brakes all round. Send us your old unit and get a reconditioned unit back ready to bolt in.
$245.00 Add:
I bought this with a 1950's car radio and wondered what it was. A completely sealed cylinder with something moving (not rattling, but moving like it...
$16.00 Add:
This will fit all Torqueflite transmissions from VF to CM
$40.00 Add:
This will fit all Torqueflite transmissions from VF to CM. It can be used to replace the earlier one pin type, which is no longer available, with...
$55.00 Add:
This will fit all Torqueflite transmissions from VF to CM
$74.00 Add:
NOS Wibroc Mirror Head, still in the box as pictured. Stainless is perfect since it still has the protective covering on it. Mirror has no foxing....
$50.00 Add:
Bonnet in good condition Doors in fair/good condition Bootlid in good condition (not pictured) Rear quarters rusted out at bottom Roof is extremely...
Add:
Standard bulb as used in all number plate light assemblies
$1.00 Add:
Quality Ryco Z9
$12.00 Add:
Suits all models
$16.50 Add:
Salvaged Oil Pump Drive Gear to suit Small Block
$50.00 Add:
Kit to suit the rebuild of Australian Slant 6 Oil Pumps
$280.00 Add:
High temp plastic construction to suit 1/2" PCV Grommet
$12.00 Add:
To suit various models from AP5
$24.00 Add:
1/2" NPT. Suits V8
$5.00 Add: