Product Image
Item Name
Price
To suit VJ - CM
$28.00 Add:
To suit VK - CM
$28.00 Add:
To suit VJ - CM
$28.00 Add:
To suit VG - VK Regal
$5.00 Add:
To suit VJ - VK
$29.00 Add:
To suit VJ - VK. Perfect chrome; very hard to find an original badge in such good condition
$35.00 Add:
To suit Charger XL VH - CL
$18.00 Add:
To suit VH - VK Charger
$39.00 Add:
To suit various VH - CM models
$43.00 Add:
To suit VG - VK Regal
$5.00 Add:
To suit VG - VK Regal
$5.00 Add:
To suit VG - CM
$39.00 Add:
To suit VG - VK Regal
$5.00 Add:
To suit VG - VK Regal
$5.00 Add:
To suit Regal 770 models from VF - VK
$20.00 Add:
To suit VG - VK
$48.00 Add:
C Pillar Badge to suit VH - CL
$32.00 Add:
To suit Regal models from VE - CM
$20.00 Add:
To suit VF - VK
$39.00 Add:
37.55 pin spacing. To suit VH - CM Sedan and Charger
$31.00 Add:
27.55 pin spacing. To suit VH - CM Sedan and Charger
$31.00 Add:
A205 Type Air Filter as used on all VH - CM 245, 265 and 318 engines fitted with 2bbl Carburettors
$16.50 Add:
NOS Bosch GB710 Alternator Brush Set to suit all models VJ - CM with Bosch Alternator
$18.00 Add:
NOS Bosch Alternator Contact Plate and Brush Set to suit all models VJ - CM with Bosch Alternator
$27.00 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$43.00 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add:
Suits all models except RV1.
$22.00 Add:
Four pin type to suit all models with Electronic Ignition; VJ - CM
$16.50 Add:
Good useable condition. Plastic Clamp Part only. As removed.
$5.00 Add:
$22.00 Add:
Good useable condition. As removed.
$10.00 Add:
$50.00 Add:
$18.00 Add:
Salvaged but made from much heavier gauge steel than the reproductions. Looks galvanised but is probably plated. Will clean up ok
$20.00 Add:
Salvaged. Surface rust but structurally sound.
$8.00 Add:
Suits both 3 and 4 Speed Gearboxes
$26.50 Add:
$20.00 Add:
Suits all models. Quality product made by an automotive OEM
$8.00 Add:
Suits VE - CM. Quality product made by an automotive OEM. Sold individually.
$4.00 Add:
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00 Add:
To Suit Sedan
$42.50 Add:
To suit Hardtop only
$42.50 Add:
To suit Charger
$42.50 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50 Add:
$28.00 Add:
Includes 2 pairs to suit both front wheels
$44.00 Add:
Includes 2 pairs to suit both rear wheels. Suits all models up to late CL
$44.00 Add:
This is a set of 4 Brake Shoes to do both front brakes
$45.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add:
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00 Add:
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50 Add:
$13.50 Add:
Caliper Kit to rebuild one VJ - Early CL Caliper.
$90.00 Add:
$30.00 Add:
$50.00 Add:
2-1/8", brass. Suits all 6 cylinder models
$5.00 Add:
Later Dished Type
$9.00 Add:
$275.00 Add:
$275.00 Add:
$275.00 Add:
$275.00 Add:
$330.00 Add:
$330.00 Add:
$275.00 Add:
To suit VK - CM with 215 / 245 / 265 and also 318 This carburettor is commonly known as the Flat Top due to the metal plate on top of the assembly....
$49.00 Add:
To suit VH - VK with 360 V8 Quality Australian Product
$49.00 Add:
To suit CH - CK
$20.00 Add:
valiantparts.com.au is a business I run in my spare time so it does take a while to transfer the 2000+ items from the old catalogue onto the website....
$0.01 Add:
Rubber Brake / Clutch pedal pad to suit VG - CM manual models
$25.00 Add:
$9.00 Add:
To suit any Valiant 6 or Small Block. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. For cars producing up to 450HP at the...
$1,345.00 Add:
To suit any Valiant 6 or Small Block. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. For cars producing up to 300HP at the...
$980.00 Add:
To suit any Valiant engine. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. Rated to 365HP. May give a slightly heavier pedal...
$295.00 Add:
To suit any Valiant engine. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. Rated to 365HP. Includes Pressure Plate, Clutch...
$445.00 Add:
Standard Clutch Kit to suit Hemi models. Includes Clutch Plate, Pressure Plate and Thrust Race Bearing.
$185.00 Add:
To suit Hemi or V8. Pre-balanced.
$550.00 Add:
$22.00 Add:
$22.00 Add:
Set of 4 Clutch Pivot Bushes
$17.00 Add:
To suit Hemi or V8 Twin Plate Clutch. Includes both inner and out plates.
$265.00 Add:
$13.50 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
This will suit VG - VK 215/245/265
$13.20 Add:
This will suit VG - VK 215/245/265
$18.00 Add:
$57.50 Add:
$60.00 Add:
This will suit VG - VK 215/245/265
$9.90 Add:
This will suit VG - VK 215/245/265
$14.00 Add:
Sold as a pair with mounting hardware
$110.00 Add:
To suit all Late VC - CM Premium Nitrile for improved leak resistance
$25.00 Add:
Full set of pads to suit VJ - Early CL disc brakes
$25.00 Add:
This will suit VJ - CM 318 and 360
$27.50 Add:
This will suit VG - CM 215/245/265
$20.00 Add:
This will suit VJ - CM 318 and 360
$33.00 Add:
This will suit VG - CM 215/245/265
$32.00 Add:
$59.00 Add:
Suits AP5 - CM. Quality rubber product made by an automotive OEM. By buying directly from the factory we have managed to cut out the middleman and...
$1.65 Add:
This includes enough strip for the top and rear vertical channel. Does not include the piece that goes into the front vertical channel as this is a...
$27.50 Add:
This is the strip that goes in the channel between the front window and the front quarter window
$123,456.00 Add: