Product Image
Item Name
Price
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Suits all models
$8.00 Add:
Set of 4 Clutch Pivot Bushes
$12.00 Add:
$13.50 Add:
Restoration-correct part to suit all Manual gearbox models
$17.00 Add:
$17.00 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00 Add:
Heavier grade than the original. Old stock.
$20.00 Add:
Standard generic model
$15.00 Add:
New but looks old as it has been bouncing around the shed for a while
$3.00 Add:
55.6mm Fits all models
$10.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
$4.00 Add:
Suits all models
$2.20 Add:
Suits RV1 - CM Slant or Hemi with original Carter Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant...
$109.00 Add:
Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up
$2.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.
$15.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...
$22.00 Add:
To suit only models with fuel sender pickups that have been enlarged to 3/8"
$25.00 Add:
To suit all models with standard 5/16" sender tube
$37.50 Add:
Suits all models
$9.00 Add:
Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...
$22.00 Add:
$0.50 Add:
Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM
$28.00 Add:
For use with Ballast Resistor
$58.00 Add:
For use with Ballast Resistor only. Made in Japan
$39.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$14.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$20.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...
$20.00 Add:
A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....
$7.00 Add:
Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs
$1.00 Add:
$10.50 Add:
$1.00 Add:
Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up
$1.75 Add:
These are the brackets used to mount the Front Sway Bar to the K-Frame
$25.00 Add:
These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Suits all Slant and Hemi engines
$4.50 Add:
These original salvaged conical washers are to suit Slant and V8 engines.
$5.00 Add:
Unavailable as a factory-correct reproduction, these original salvaged washers feature the concave shape. Suitable for both Slant and Hemi
$5.00 Add:
This will fit all Torqueflite transmissions from VF to CM. It can be used to replace the earlier one pin type, which is no longer available, with...
$55.00 Add:
Standard bulb as used in all number plate light assemblies
$1.00 Add:
Suits all models
$16.50 Add:
Suits TorqueFlite 904
$18.50 Add:
$11.00 Add:
$28.90 Add:
Standard Bulb used to light the Radio Dial and several other interior applications
$1.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...
$55.00 Add:
Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic
$32.00 Add:
Quality SuperPro polyurethane product. 4 bushes are supplied; enough to do 1 car
$45.00 Add:
Set includes enough to do one rear shock; 4x Washers and 2x Nuts
$19.00 Add:
Quality US-made product. Sold as a pair.
$155.00 Add:
Suits all models with 34mm dia front leaf spring bushes. Price is for 4 Bushes, enough for 1 car
$24.00 Add:
Suits all models with 34mm dia front leaf spring bushes. Price is for a pair; enough to do 1 car
$38.00 Add:
Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...
$20.00 Add:
Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...
$45.00 Add:
To suit Slant 6, Hemi and Small Block engines running camshafts with lift over 0.500". Exceeds E49 and E55 factory specifications. Sold individually...
$15.50 Add:
To suit Slant 6, Hemi and Small Block. Sold individually so 6 cylinder owners can order 12 and V8 owners can order 16
$13.00 Add:
BP5ES
$5.60 Add:
BCP5ES
$5.60 Add:
Quality Australian-made sintered bronze product. Suits all manual transmissions.
$11.00 Add:
Suits manual Steering Box
$35.00 Add:
Suits manual Steering Box
$15.00 Add:
Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.
$32.00 Add:
Suits all models
$1.50 Add:
Suits all models
$49.00 Add:
To suit all 6 cylinder models
$4.50 Add:
Opening temp = 82 degrees
$13.20 Add:
If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer
$5.85 Add:
Pair of MDI Seals. Suits all models
$26.00 Add:
To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...
$49.00 Add:
To suit all Valiant models except those with Sure-Grip Limited Slip Diffs
$22.00 Add:
Includes nuts and washers.
$30.00 Add:
Nolathane or Moog brand
$17.00 Add:
Quality Australian-made Mackay Rubber product. 4 required per car
$15.00 Add:
Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.
$40.00 Add:
Suits all models. Order 12x for Hemi or Slant, 16x for V8
$3.00 Add:
NOS Bosch RE55 Voltage Regulator. In storage for over 20 years, this Australian-made unit has been waiting long enough to become part of your project!
$45.00 Add:
1-5/8", brass. Suits Slant, Hemi and V8 models
$5.00 Add:
1-5/8", brass. Suits Slant, Hemi and V8 models
$5.00 Add:
Gasket that goes under the Wheel Cylinder. Suits all models
$4.00 Add:
Includes flat washer
$2.50 Add:
$2.00 Add:
$2.00 Add:
To suit all models. Generic, inoffensive-looking assembly; kit includes everything from button to nozzles
$32.00 Add:
$3.00 Add:
$3.00 Add:
Black OEM-style wiring harness tape, as per original
$15.00 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add: