Log In

Home :: CM

CM

The CM range was visually very similar to the CL, but was marked more by what was not there in the model line-up. Gone was the ute and the panel van; even the Charger was dropped, to the horror of car-people nationwide. After the Mitsubishi takeover of Chrysler Australia, Valiant production continued as the tooling was fully amortised and the model could be produced profitably in small numbers. The profit from the sale of one Valiant was around 3 times the profit from the sale of the hideous new Sigma. When the final Valiant rolled off the line on August 28, 1981, an assembly line worker wrote "Last Barstard" on the boot floor with his caulking gun.

Displaying 101 to 200 (of 365 auto parts)

[<< Prev] 1 2 3 4 [Next >>]

Product Image	Item Name	Price
	Flex Plate, Slant / Hemi with Torqueflite, Salvaged	$50.00 Add:
	Front Axle Hub Seal Front Axle Hub Seal to suit all models from VG-CM. You do not need to purchase this item if you are buying the Front Wheel Bearing Kit as it is...	$7.70 Add:
	Front Brake Hose Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!	$38.00 Add:
	Front Brake Hose Set, Braided Top quality hoses, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...	$110.00 Add:
	Front Door Window Glass, Salvaged, Driver's Side, Full Glass Salvaged Front Door Window Glass to suit door without vent window. To suit sedan, wagon, ute and panel van. Good condition with no scratches or chips.	$50.00 Add:
	Front Door Window Glass, Salvaged, Driver's Side, Tinted Salvaged Front Door Window Glass to suit door with vent window. Tinted. To suit sedan, wagon, ute and panel van. Good condition with no scratches or...	$65.00 Add:
	Front Door Window Glass, Salvaged, Passenger Side, Tinted Salvaged Front Door Window Glass to suit door with vent window. To suit sedan, wagon, ute and panel van. Tinted. Good condition with no scratches or...	$65.00 Add:
	Front Handbrake Cable Assembly, Remanufactured All models except Charger. Exchange Required.	$120.00 Add:
	Front Indicator Lens	$59.00 Add:
	Front Indicator Lens Gasket	$7.50 Add:
	Front Indicator Lens, Salvaged Has a crack but good driver quality	$18.00 Add:
	Front Kick Panel Set, Fibreglass, to fit 6" Speakers Fits VE - VG; may also fit other models with some trimming. Includes cutout to fit 6" speakers. A professional-looking way to add speakers without...	$220.00 Add:
	Front Kick Panel Set, Fibreglass, with 80W Speakers Fits VE - VG; may also fit other models with some trimming. Includes Custom Autosound 80W speakers. A professional-looking way to add speakers...	$248.00 Add:
	Front Kick Panel Set, Masonite	$35.00 Add:
	Front Quarter Rust Repair Panel, Drivers Side	$125.00 Add:
	Front Quarter Rust Repair Panel, Passenger Side	$125.00 Add:
	Front Shock Absorber Lower Bush Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...	$13.80 Add:
	Front Shock Absorber Upper Bushes, Pair Genuine Mackay, Australian made. Includes inner tubes.	$80.00 Add:
	Front Wheel Bearing Kit Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all VK - CM models with front disc brakes	$29.00 Add:
	Front Wheel Inner Bearing	$12.00 Add:
	Front Wheel Outer Bearing	$12.00 Add:
	Front Windscreen Chrome Mould Clip Set Set of 20 Clips. Suits VF - VG Hardtop, various CL / CM models, Chrysler by Chrysler CH / CJ / CK	$60.00 Add:
	Front Windscreen Seal	$141.00 Add:
	Front Windscreen, Salvaged Salvaged Front Windscreen to suit VH - CM. Good condition with no scratches or chips. There is no way I'll be posting this but it can be couriered or...	$100.00 Add:
	Fuel Filler to Body Gasket	$4.00 Add:
	Fuel Pump Gasket Suits all models	$2.20 Add:
	Fuel Pump Rebuild Kit, Hemi/V8 with Email Fuel Pump Suits VG - CM Hemi/318/340/360 with original Email Fuel Pump. Quality Australian product. Will not fit the following: Hemi/V8 with Email Fuel Pump...	$115.00 Add:
	Fuel Pump Rebuild Kit, Hemi/V8 with Email Fuel Pump & Webers Suits VG - CM Hemi/318/340/360 with original Email Fuel Pump AND Weber Carburetors. Quality Australian product. Will not fit the following: Modern...	$115.00 Add:
	Fuel Pump Rebuild Kit, Slant or Hemi with Carter Fuel Pump Suits RV1 - CM Slant or Hemi with original Carter Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant...	$109.00 Add:
	Fuel Pump, 215, 245, 265 Suits VG - CM Hemi. Direct fit for Hemi engines as pictured. Non-serviceable sealed unit	$55.00 Add:
	Fuel Sender Ground Strap, Salvaged Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up	$2.00 Add:
	Fuel Sender Ground Strap, Spring Steel Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.	$15.00 Add:
	Fuel Sender Ground Strap, Stainless Steel Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...	$22.00 Add:
	Fuel Tank Filler Seal This is the seal between the Filler Tube and Tank. Suits AP5 - CM	$20.00 Add:
	Fuel Tank Sender Pickup Filter, 3/8" To suit only models with fuel sender pickups that have been enlarged to 3/8"	$25.00 Add:
	Fuel Tank Sender Pickup Filter, Standard To suit all models with standard 5/16" sender tube	$37.50 Add:
	Fuel Tank Sender Resistor Card To suit all CM models except Ute	$48.00 Add:
	Fuel Tank Sender Seal Suits all models	$9.00 Add:
	Fuel Tank Strap J-Bolt Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...	$22.00 Add:
	Full Rubber Kit, Sedan	$123,456.00 Add:
	Full Rubber Kit, Wagon	$123,456.00 Add:
	Handbrake Cable Bracket Retainer Clip	$0.50 Add:
	Handbrake Cable, Rear, Left The long one	$70.00 Add:
	Handbrake Cable, Rear, Right The short one	$60.00 Add:
	Harmonic Balancer	$110.00 Add:
	Headlight Switch	$55.00 Add:
	Headlight Switch Harness, Salvaged Headlight Switch Harness, viciously hacked out of cars wrecked back in the day when it wasn't worthwhile to carefully remove the whole wiring loom;...	$20.00 Add:
	Headlight, High Beam 5-3/4" 5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High Beam Single Filament Single Beam	$22.00 Add:
	Headlight, High/Low Beam 5-3/4" 5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High/Low Sealed Beam	$22.00 Add:
	Heater Hose and Wiring Blanking Grommet To suit all VE-CM without a heater	$20.00 Add:
	Heater Hose and Wiring Grommet To suit all VE-CM fitted with a heater	$20.00 Add:
	Heavy Duty Late Model Ignition Switch Suits all models from VJ to CM as well as late model VH. Wave goodbye to your underengineered factory switch with this heavy duty Ignition Switch...	$185.00 Add:
	Hemi 6 Engine Mount, Left For the passenger's side; on your right when you open the bonnet!	$70.00 Add:
	Hemi 6 Engine Mount, Right For the driver's side; on your left when you open the bonnet!	$70.00 Add:
	Hood to Cowl Seal	$48.00 Add:
	Horn Button Horn Button, salvaged. Removed many years ago so plenty of life left in them yet. Guaranteed to work.	$48.00 Add:
	Horn Relay Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM	$28.00 Add:
	Hydraulic Lifters	$99.00 Add:
	Hydraulic Lifters, V8, Salvaged Salvaged, sold individually	$8.00 Add:
	Ignition Coil, Bosch GT40R For use with Ballast Resistor	$58.00 Add:
	Ignition Coil, Bosch SU12R For use with Ballast Resistor only. Made in Japan	$39.00 Add:
	Indicator Flasher Can If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.	$14.00 Add:
	Indicator Flasher Can, Bosch NOS If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.	$20.00 Add:
	Indicator Flasher Can, Large Type If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...	$20.00 Add:
	Indicator Steering Wheel Ring A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....	$7.00 Add:
	Instrument Panel Bayonet Bulb Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs	$1.00 Add:
	Instrument Panel T10 Wedge Bulb Standard bulb as used in all dashboard applications requiring push-in wedge type bulbs. Note dashboards may also include other bulb types.	$1.00 Add:
	Interior Dome Light Lens	$22.00 Add:
	Interior Door Handle, Left New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different	$48.00 Add:
	Interior Door Handle, Left, Salvaged To suit Chrysler by Chrysler and upmarket CL/CM. Some pitting in the chrome but at least they are the correct type.	$18.00 Add:
	Interior Door Handle, Right New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different	$48.00 Add:
	Interior Door Handle, Right, Salvaged To suit Chrysler by Chrysler and upmarket CL/CM. Some pitting in the chrome but at least they are the correct type.	$18.00 Add:
	Interior Light Door Switch	$10.50 Add:
	Interior Trim Panel Clip	$1.00 Add:
	J Nut / Panel Nut, 5/16" Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up	$1.75 Add:
	K-Frame Sway Bar Mounting Bracket These are the brackets used to mount the Front Sway Bar to the K-Frame	$25.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 18mm These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 20mm These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 22mm These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 23mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 24mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 25mm These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 27mm These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 30mm These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 727 Quality kit with braided sheathing	$110.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 904 Quality kit with braided sheathing	$110.00 Add:
	Lock Ferrule Suits all models from AP5 to CM except VF/VG Hardtop. Sold individually.	$19.50 Add:
	Lock Knob, Black, Hardtop Suits VF - VG Hardtop	$9.00 Add:
	Lock Knob, Chrome, Hardtop Suits VF - VG Hardtop	$9.00 Add:
	Lower Ball Joint Rubber Boot An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...	$7.70 Add:
	Lower Control Arm Bump Stop, Urethane Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.	$25.00 Add:
	Lower Control Arm Bush Pair Urethane Full kit that includes inner and outer metal sleeves	$84.00 Add:
	Lower Steering Shaft Dust Cover	$9.00 Add:
	Lower Tailgate Seal To suit VH - CM Wagon	$80.00 Add:
	Main Bearing Set, Hemi 6	$72.00 Add:
	Main Bearings 273 / 318 / 340 Clevite brand	$80.00 Add:
	Manifold Gasket To suit 215, 245, 265	$18.00 Add:
	Manifold Stud and Nut Suits all Slant and Hemi engines	$4.50 Add:
	Manifold Washer, Original Round Type, Salvaged These original salvaged conical washers are to suit Slant and V8 engines.	$5.00 Add:
	Manifold Washer, Original Triangle Type, Salvaged Unavailable as a factory-correct reproduction, these original salvaged washers feature the concave shape. Suitable for both Slant and Hemi	$5.00 Add:

Displaying 101 to 200 (of 365 auto parts)

[<< Prev] 1 2 3 4 [Next >>]