Product Image
Item Name
Price
Inner Weatherstrip, to suit Rear Doors, Right or Left side
$29.00 Add:
This is the Standard Version, which means it is wrapped in black cloth tape, like the original. We make the best weatherstrips on the market. Using...
$24.00 Add:
This is the Standard Version, which means it is wrapped in black cloth tape, like the original. We make the best weatherstrips on the market. Using...
$24.00 Add:
This is the Regal Version, which means it is sheathed in stainless steel. Yes, I know there was never a Regal RV1/SV1, but these mirror finish strips...
$24.00 Add:
This is the Regal Version, which means it is sheathed in stainless steel. Yes, I know there was never a Regal RV1/SV1, but these mirror finish strips...
$24.00 Add:
Includes both the large and small profiles to suit the front side, rear side and top of the window frame. Enough to do one door.
$37.50 Add:
This includes enough strip for one complete rear door.
$37.50 Add:
$16.00 Add:
$16.00 Add:
One kit does both vent windows
$7.50 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
This is an original piece of glass for a front door. The same piece of glass was used for both sides; the Armourplate logo is reversed when viewed...
$50.00 Add:
This is an original piece of glass for a rear door. The same piece of glass was used for both sides; the Armourplate logo is reversed when viewed...
$50.00 Add:
This is an original piece of glass for the fixed rear window. The same piece of glass was used for both sides; the Armourplate logo is reversed when...
$50.00 Add:
Bonnet Latch Assembly, including the mechanism but not including the Badge.
$60.00 Add:
Bonnet Catch Assembly, including the spike and spring.
$45.00 Add:
Each kit is enough to do 2 handles
$10.00 Add:
Includes keys x2, door barrels x2, barrel clips x2, and barrel seals. Note these are a direct replacement for Late VC - VG. They can be used in...
$55.00 Add:
A pair of black gaskets to keep your door lock assemblies watertight. Note that you do not need to purchase these if you have already purchased the...
$8.00 Add:
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00 Add:
Salvaged Boot Latch assembly. Needs cleaning up but if sandblasting, do not blast the spindle which the Lock Barrel fits into. This part is made of a...
$40.00 Add:
Salvaged Boot Catch assembly; the part that bolts to the Boot Lid.
$25.00 Add:
Suits all models. Quality product made by an automotive OEM
$8.00 Add:
$20.00 Add:
$45.00 Add:
Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up
$1.75 Add:
$50.00 Add:
$50.00 Add:
$99.00 Add:
$60.00 Add:
$60.00 Add:
To suit RV1/SV1 Quality digital print
$16.50 Add:
To suit RV1/SV1 Quality digital print
$17.00 Add:
To suit RV1/SV1 Quality digital print
$16.50 Add:
To suit RV1 - VF Quality digital print
$26.00 Add:
To suit RV1 Printed on a plate with a satin finish
$26.00 Add:
To suit AP5 - CM Quality digital print
$6.50 Add:
To suit RV1 - VG Quality digital print
$19.00 Add:
To suit RV1 Printed on a plate with a satin finish
$26.00 Add:
$42.00 Add:
$42.00 Add:
$42.00 Add:
$52.00 Add:
Salvaged and in poor condition. Damage as shown; repair it yourself or we can arrange restoration for you; POA as we have no idea how much it will...
$45.00 Add:
3 available, all in poor condition as pictured. We can also arrange to have these restored for you; POA because we have no idea how much it will cost...
$40.00 Add:
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
If your red oil light on the dash has split or faded to a girly pink colour, this correct shade of red will have it looking the way it is supposed...
$1.50 Add:
New reproduction, perfect copy of the original
$58.00 Add:
New reproduction, perfect copy of the original. Includes shaft.
$90.00 Add:
To suit RV1 and SV1. Horizontal ridge design. Missing tabs so will need to be fitted with double-sided tape. Needs refinishing but otherwise a good...
$50.00 Add:
Blanking Plate for RV1 - SV1 models without demisting feature. Salvaged.
$15.00 Add:
$40.00 Add:
$5.00 Add:
Glove Box Hinge. Missing one screw clip. Some surface rust but still solid.
$32.00 Add:
Salvaged Dash Corner Trim, Right Hand Side
$10.00 Add:
Salvaged Dash Corner Trim, Left Hand Side
$10.00 Add:
This item is a clutch pedal pad for RV1-VC and a brake pedal pad for RV1-SV1 and manual AP5-VC
$14.00 Add:
The grey disc that goes behind the handle/winder to protect the door trim
$1.00 Add:
$2.00 Add:
Stop your Window Winders and Interior Door Handles from wobbling, rattling, and wrecking your door trim by replacing your missing springs.
$3.00 Add:
This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.
$6.50 Add:
$35.00 Add:
Covered in primer overspray that can be cleaned off. Some damage to middle panel. Backing Board needs replacement.
$27.00 Add:
Top and Bottom panels are in good condition. Couple of minor nicks to the middle panel. Good Colour. Needs new backing board.
$60.00 Add:
Rip around the door handle opening and lower panel. Backing board no good. Rough, hence price.
$30.00 Add:
Covered in overspray and pretty rough. Would look better cleaned up and on a new board. Would also look better on fire. Damage to trailing edge of...
$25.00 Add:
Good colour but there are some nicks to the middle panel. Needs new backing board.
$40.00 Add:
Rough, apart from top panel. Faded too. Could be cleaned up for bash car. How desperate are you?
$25.00 Add:
Minor damage to top and bottom panels. A bit faded. Backing board needs replacement.
$40.00 Add:
$1.00 Add:
Kit to suit the rebuild of Australian Slant 6 Oil Pumps
$280.00 Add:
Salvaged Window Regulator to suit RV1/SV1 Driver's Side Front Door. Has been ultrasonically cleaned, regreased and tested. Includes linkage arm and...
$60.00 Add:
Salvaged Window Regulator to suit RV1/SV1 Driver's Side Rear Door. Has been ultrasonically cleaned, regreased and tested. Includes linkage arm and...
$60.00 Add:
This is one of the bolts that holds the internal door mechanisms (Door Handle Spindle or Window Winder Mechanism) to the door shell. This is a...
$0.75 Add:
This is one of the bolts that holds the internal door mechanisms (Door Handle Spindle or Window Winder Mechanism) to the door shell. This is a...
$0.75 Add:
If your Vent Window flaps around in the breeze, you need to tighten the Lower Vent Window Pivot Clamp Screw that is located behind the Window Sill....
$2.00 Add:
These are the 2x bolts that hold the Lower Vent Window Pivot to the Door Shell. These are sometimes lost by being dropped inside the door shell, so...
$1.50 Add:
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add:
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add:
The small Philips Head screws that secure the vent window assembly to the top and leading edge of the door window frame are notorious for seizing or...
$2.00 Add:
This is an original piece of glass for the Driver's Side Rear Door. Technically you could use it for the passenger side rear door too since the glass...
$45.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
I bought this with a 1950's car radio and wondered what it was. A completely sealed cylinder with something moving (not rattling, but moving like it...
$16.00 Add:
This thermos is in excellent condition, having spent it's life in a laboratory instead of bouncing around in the boot of the family hack....
$45.00 Add: