Log In

Home :: SV1

SV1

Following the success of the R Series, the S Series was released in March of 1962. Although there were minor changes under the skin, the most notable differences were cosmetic. The most obvious of these was the replacement of the iconic simulated spare wheel pressing on the boot lid with a large Valiant motif. Although R Series owners were presumably unimpressed about no longer owning the current model after no more than two months, their revenge came in the form of the hordes of people who ask S Series owners if theirs is "the one with the spare tyre thingy on the boot?" 10009 S Series were produced and it is estimated that roughly 1/3 of these are still in existence today.

Displaying 101 to 200 (of 379 auto parts)

[<< Prev] 1 2 3 4 [Next >>]

Product Image	Item Name	Price
	Front Wheel Outer Bearing	$12.00 Add:
	Front Shock Absorber Upper Bushes, Pair Genuine Mackay, Australian made. Includes inner tubes.	$80.00 Add:
	Front Shock Absorber Lower Bush Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...	$13.80 Add:
	Lower Control Arm Bush Pair Urethane Full kit that includes inner and outer metal sleeves	$84.00 Add:
	Lower Control Arm Bump Stop, Urethane Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.	$25.00 Add:
	Upper Control Arm Bump Stops, MDI, Pair Includes nuts and washers.	$30.00 Add:
	Upper Control Arm Bush, Rubber Quality Australian-made Mackay Rubber product. 4 required per car	$15.00 Add:
	Upper Control Arm Bush, Polyurethane Nolathane or Moog brand	$17.00 Add:
	Upper Control Arm Offset Bolts Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.	$40.00 Add:
	Ball Joint, Lower, Right Hand Suits all models, excluding those fitted with solid disc brakes	$43.00 Add:
	Ball Joint, Lower, Left Hand Suits all models, excluding those fitted with solid disc brakes. Wasp brand	$49.00 Add:
	Lower Ball Joint Rubber Boot An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...	$7.70 Add:
	Upper Ball Joint Suits all models except RV1.	$24.00 Add:
	Upper Ball Joint Rubber Boot If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.	$5.75 Add:
	Tie Rod End, R/H thread Suits all Valiant models except R Series For R/H outer and L/H inner	$16.50 Add:
	Tie Rod End, L/H thread Suits all Valiant models except R Series For L/H outer and R/H inner	$16.50 Add:
	Tie Rod End Rubber Boot If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer	$5.85 Add:
	Idler Arm, Small Bolt Type This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...	$44.00 Add:
	Idler Arm Bush, Small Bolt Type, Rubber This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$10.00 Add:
	Idler Arm Bush, Small Bolt Type, Nolathane This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$24.50 Add:
	Radius Rod Bushes Sold as a pair, Single Piece Type	$25.00 Add:
	Pitman Arm, SV1-AP6 6 cylinder Suits SV1, AP5 and 6 cylinder AP6	$124.00 Add:
	Sway Bar Links and Rubbers Suits all models	$49.00 Add:
	K-Frame Sway Bar Mounting Bracket These are the brackets used to mount the Front Sway Bar to the K-Frame	$25.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 18mm These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 20mm These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 22mm These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 23mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 24mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 25mm These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 27mm These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 30mm These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	Steering Box Lower Oil Seal Suits manual Steering Box	$35.00 Add:
	Steering Box Upper Oil Seal Suits manual Steering Box	$15.00 Add:
	Steering Coupling Repair Kit Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.	$32.00 Add:
	Torsion Bar Seals Pair of MDI Seals. Suits all models	$26.00 Add:
	Master Cylinder Piston Seal	$25.00 Add:
	Master Cylinder Kit This kit is to suit the rebuild of the RV1-SV1 Master Cylinder	$45.00 Add:
	Master Cylinder Early model Master Cylinder. This is the type with the cover held down with the bolt, but it can be used to replace the type with the screw type lid,...	$220.00 Add:
	Master Cylinder, Exchange	$220.00 Add:
	Brake Shoes, Front Set This is a set of 4 Brake Shoes to do both front brakes	$45.00 Add:
	Front Brake Drum	$99.00 Add:
	Front Brake Hose for Drum Brakes Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!	$38.00 Add:
	Brake Hose Full Set, Braided, Drum Brakes Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...	$165.00 Add:
	Brake Shoes, Rear Set This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums	$50.00 Add:
	Rear Brake Drum	$99.00 Add:
	Rear Brake Hose Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!	$38.00 Add:
	Rear Brake Hose, Braided Top quality hose, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...	$55.00 Add:
	Wheel Cylinder, Front Right	$42.00 Add:
	Wheel Cylinder, Front Left	$42.00 Add:
	Rear Wheel Cylinder	$22.00 Add:
	Wheel Cylinder Gasket Gasket that goes under the Wheel Cylinder. Suits all models	$4.00 Add:
	Brake Spring and Clip Set To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes	$36.00 Add:
	Handbrake Cable, Front Quality Australian-made product	$108.50 Add:
	Handbrake Cable, Rear To suit RV1 and early SV1; one required per car. Quality Australian-made product. Suits all RV1 and SV1 body numbers up to SV1-2-542 and SV1-4-441	$170.00 Add:
	Handbrake Cable, Rear To suit late SV1; two required per car. Quality Australian-made product. Suits SV1 body numbers SV1-2-543 and SV1-4-442 and later.	$84.00 Add:
	Handbrake Cable, Intermediate To suit late SV1; one required per car. Quality Australian-made product. Suits SV1 body numbers SV1-2-543 and SV1-4-442 and later.	$48.00 Add:
	Handbrake Cable Connector	$12.00 Add:
	Handbrake Cable Connector, Salvaged Has spent decades under a car and looks like it. Works fine; save money by buying rusty!	$5.00 Add:
	Handbrake Cable Bracket Retainer Clip	$0.50 Add:
	Universal Joint To suit all Valiant models except those with Sure-Grip Limited Slip Diffs	$22.00 Add:
	Ball and Trunnion Boot Kit This kit includes the ball and trunnion boot and the clamps required to fit it. Note: you may need a larger type if your running gear has been...	$50.00 Add:
	Rear Wheel Bearing Kit Includes Bearing, Lock Collar and Rear Axle Seal. One set per wheel.	$86.00 Add:
	Rear Axle Seal	$22.00 Add:
	Diff Cover Plate Gasket To suit all RV1 - Early VC	$15.00 Add:
	Diff U-Bolt Set To suit all models up to early VG	$74.00 Add:
	Lowering Block Kit, 1" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 1.5" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 2" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 2.5" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 3" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Wheel Nut, Standard, Right Hand Thread	$2.00 Add:
	Wheel Nut, Mag Wheel, 7/16" Right Hand Thread Includes flat washer	$2.50 Add:
	Rear Spring Front Bush Suits all models with 34mm dia front leaf spring bushes. Price is for 4 Bushes, enough for 1 car	$24.00 Add:
	Rear Spring Front Bush, Urethane Suits all models with 34mm dia front leaf spring bushes. Price is for a pair; enough to do 1 car	$38.00 Add:
	Rear Shackle Assembly NOS	$68.00 Add:
	Rear Spring Shackle Bush Set, Rubber, 22mm Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...	$45.00 Add:
	Rear Spring Shackle Bush Set, Nolathane, 22mm Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...	$20.00 Add:
	Rear Shock Absorber Set, Monroe Gas Quality US-made product. Sold as a pair.	$155.00 Add:
	Rear Shock Absorber Bush Set Quality SuperPro polyurethane product. 4 bushes are supplied; enough to do 1 car	$45.00 Add:
	Rear Shock Absorber Lower Mounting Set Set includes enough to do one rear shock; 4x Washers and 2x Nuts	$19.00 Add:
	Exhaust Flange Gasket, 225	$11.95 Add:
	Exhaust Flange Gasket, 225, NOS Copper-faced gasket, old stock, brand unknown	$11.00 Add:
	Exhaust Hanger, Standard Standard generic model	$15.00 Add:
	Exhaust Hanger, Heavy Duty Heavier grade than the original. Old stock.	$20.00 Add:
	Exhaust Pipe Clamp, 1.5", shelf wear discount New but looks old as it has been bouncing around the shed for a while	$3.00 Add:
	Ignition Switch	$46.00 Add:
	Ignition Barrel and Key Suits all models from RV1 - VG	$22.00 Add:
	Ignition and Door Barrel and Key Set Re-key your doors and ignition to use the same key. Ignition Barrel is exact replacement for all models from RV1-VG. Door Barrels are exact...	$80.00 Add:
	2444980 Voltage Regulator NOS Whilst unfortunately not perfect due to being stored in damp conditions, this is perfect for a survivor car. Suits all models with Chrysler...	$72.00 Add:
	Voltage Regulator, Bosch RE55, NOS NOS Bosch RE55 Voltage Regulator. In storage for over 20 years, this Australian-made unit has been waiting long enough to become part of your project!	$45.00 Add:
	Voltage Regulator, Original Style Not identical but very similar in style to the original Voltage Regulator	$55.00 Add:
	Starter Relay, Automatic Starter Relay to suit RV1 - VC Automatic	$27.50 Add:
	Starter Relay, Manual Starter Relay to suit RV1 - VC Manual	$27.50 Add:
	Ballast Resistor Two pin type to suit all models with Points; RV1 - VH	$8.80 Add:
	Contact Points Set To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273	$13.20 Add:
	Rotor Button To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273	$16.20 Add:
	Distributor Cap	$22.00 Add:
	Condenser To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273 Bonus storytime: Sometime in early/mid 2012 I went to see Geoff Dundon of Replacement Valiant...	$7.70 Add:
	Distributor Drive Gear Original style Nylon gear with Spring Pin to fit to Distributor Shaft	$28.00 Add:

Displaying 101 to 200 (of 379 auto parts)

[<< Prev] 1 2 3 4 [Next >>]