Product Image
Item Name
Price
$130.00 Add:
$130.00 Add:
$1,100.00 Add:
$1,100.00 Add:
$1,100.00 Add:
$1,100.00 Add:
This is the small Timing Gear, removed from a 273 engine. Good condition.
$24.00 Add:
Clevite brand
$80.00 Add:
Adjustable, Tru-Roller type.
$110.00 Add:
$60.00 Add:
$50.00 Add:
Suits all V8 models. Includes: 1 x 1-1/4", 9 x 1-5/8" and 1 x 1-7/8" brass cup welch plugs, 1 x 3/8" NPT Pipe Plug, and 1 x 1/2" NPT Pipe Plug
$49.50 Add:
1-1/4", brass. Suits V8
$5.00 Add:
1-7/8", brass. Suits V8
$5.00 Add:
Early Conical Type
$6.60 Add:
2-1/8", brass. Suits 225
$5.00 Add:
3/8" NPT. Suits V8
$5.00 Add:
1/2" NPT. Suits V8
$5.00 Add:
Original Rope Type
$35.00 Add:
2x required per car; each side is the same.
$42.00 Add:
Salvaged, sold individually
$8.00 Add:
Original salvaged 273 Rocker Arms including all Rockers and hardware as removed from vehicle
$125.00 Add:
Original salvaged 273 Rocker Covers with crappy paint job. If you're trying to get your engine bay back to original and those cheap aftermarket...
$100.00 Add:
$9.00 Add:
Restoration-correct part to suit all Manual gearbox models
$17.00 Add:
Quality Australian-made sintered bronze product. Suits all manual transmissions.
$11.00 Add:
To suit all linkage-operated 904 and 727 TorqueFlite transmissions
$17.00 Add:
To suit all TorqueFlite transmissions built after 1966
$5.50 Add:
$17.00 Add:
Set of 4 Clutch Pivot Bushes
$12.00 Add:
$22.00 Add:
$22.00 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00 Add:
$13.50 Add:
Suits all models
$8.00 Add:
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Quality kit with braided sheathing
$110.00 Add:
$50.00 Add:
6 per car. Suits all models.
$4.50 Add:
Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic
$32.00 Add:
Suits TorqueFlite 727, Borg Warner 4 Speed Manual
$27.00 Add:
Suits TorqueFlite 904
$18.50 Add:
To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...
$49.00 Add:
Suits RV1 - AP6 These are the bolts that hold the Parking Lock Cover on. There are 5x per car. [note to self; these also fit...
$3.00 Add:
To suit Borg Warner 3 Speed Manual Gearboxes for AP5 - early VF and as a Rear Selector Seal for Borg Warner 4 Speed Manual Gearboxes
$6.00 Add:
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00 Add:
This is the gasket that goes between the Gearbox Housing and the Gearbox Extension.
$14.00 Add:
To suit AP5 and AP6
$35.00 Add:
To suit Borg Warner 35 Automatic and 3 & 4 speed Manual. Includes Firewall Grommet
$118.00 Add:
Not currently available (I'm working on it)
$38.50 Add:
Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00 Add:
Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70 Add:
$12.00 Add:
$12.00 Add:
$12.00 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
Full kit that includes inner and outer metal sleeves
$84.00 Add:
Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00 Add:
Includes nuts and washers.
$30.00 Add:
Quality Australian-made Mackay Rubber product. 4 required per car
$15.00 Add:
Nolathane or Moog brand
$17.00 Add:
Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.
$40.00 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00 Add:
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70 Add:
Suits all models except RV1.
$24.00 Add:
If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.
$5.75 Add:
Suits all Valiant models except R Series For R/H outer and L/H inner
$16.50 Add:
Suits all Valiant models except R Series For L/H outer and R/H inner
$16.50 Add:
If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer
$5.85 Add:
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
Sold as a pair, Single Piece Type
$25.00 Add:
Suits SV1, AP5 and 6 cylinder AP6
$124.00 Add:
To suit all VC models and V8 AP6
$55.00 Add:
Suits all models
$49.00 Add:
These are the brackets used to mount the Front Sway Bar to the K-Frame
$25.00 Add:
These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
Suits manual Steering Box
$35.00 Add:
Suits manual Steering Box
$15.00 Add:
Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.
$32.00 Add:
Pair of MDI Seals. Suits all models
$26.00 Add:
This kit is to suit the rebuild of the AP5 - VC Screw Top Master Cylinder
$64.00 Add:
$185.00 Add:
This is a set of 4 Brake Shoes to do both front brakes
$45.00 Add:
$99.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add: