Product Image
Item Name
Price
"CK CXC / VK RANGER WITH A53 OPTION / VK REGAL / CL VALIANT (A53, $$$$$$$$$) / CL $$$$ V8 AUTO SPEEDO CABLE SHAFT"
Add:
"CM VALIANT V8 904 TORQUEFLITE FRONT CLUTCH REACTION SHAFT SUPPORT GASKET"
Add:
Add:
$350.00 Add:
Headlight Switch Harness, viciously hacked out of cars wrecked back in the day when it wasn't worthwhile to carefully remove the whole wiring loom;...
$20.00 Add:
$235.00 Add:
I bought this with a 1950's car radio and wondered what it was. A completely sealed cylinder with something moving (not rattling, but moving like it...
$16.00 Add:
$565.99 Add:
This thermos is in excellent condition, having spent it's life in a laboratory instead of bouncing around in the boot of the family hack....
$45.00 Add:
To suit all TorqueFlite transmissions built after 1966
$5.50 Add:
To suit AP5 - CM Quality digital print
$6.50 Add:
$54.00 Add:
These are the little plastic spacers that go between the individual spring leafs. Dealer book says to suit CM but may suit other models.
$12.00 Add:
$42.00 Add:
To suit RV1 Printed on a plate with a satin finish
$26.00 Add:
To suit RV1 Printed on a plate with a satin finish
$26.00 Add:
Bonnet Catch Assembly, including the spike and spring.
$45.00 Add:
Bonnet Latch Assembly, including the mechanism but not including the Badge.
$60.00 Add:
$123,456.00 Add:
$42.00 Add:
3 available, all in poor condition as pictured. We can also arrange to have these restored for you; POA because we have no idea how much it will cost...
$40.00 Add:
$7.50 Add:
$25.00 Add:
$25.00 Add:
For the passenger's side; on your right when you open the bonnet!
$68.00 Add:
For the driver's side; on your left when you open the bonnet!
$68.00 Add:
$7.50 Add:
$47.50 Add:
$47.50 Add:
Salvaged and in poor condition. Damage as shown; repair it yourself or we can arrange restoration for you; POA as we have no idea how much it will...
$45.00 Add:
$42.00 Add:
To suit all Push-Button 904 and 727 TorqueFlite Transmissions
$19.00 Add:
$12.00 Add:
Has spent decades under a car and looks like it. Works fine; save money by buying rusty!
$5.00 Add:
Suits RV1 - AP6 These are the bolts that hold the Parking Lock Cover on. There are 5x per car. [note to self; these also fit...
$3.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00 Add:
6 per car. Suits all models.
$4.50 Add:
This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.
$6.50 Add:
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00 Add:
$20.00 Add:
Suits all models. Quality product made by an automotive OEM
$8.00 Add:
Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies
$1.00 Add:
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00 Add:
Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50 Add:
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50 Add:
2-1/8", brass. Suits all 6 cylinder models
$5.00 Add:
$9.00 Add:
$22.00 Add:
$22.00 Add:
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Suits all models
$8.00 Add:
Set of 4 Clutch Pivot Bushes
$12.00 Add:
$13.50 Add:
Restoration-correct part to suit all Manual gearbox models
$17.00 Add:
$17.00 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00 Add:
Heavier grade than the original. Old stock.
$20.00 Add:
Standard generic model
$15.00 Add:
New but looks old as it has been bouncing around the shed for a while
$3.00 Add:
55.6mm Fits all models
$10.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
$4.00 Add:
Ryco Z14. Suits all models
$6.00 Add:
Suits all models
$2.20 Add:
Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up
$2.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.
$15.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...
$22.00 Add:
To suit only models with fuel sender pickups that have been enlarged to 3/8"
$25.00 Add:
To suit all models with standard 5/16" sender tube
$33.00 Add:
Suits all models
$9.00 Add:
Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...
$22.00 Add:
$0.50 Add:
Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM
$28.00 Add:
For use with Ballast Resistor
$58.00 Add:
For use with Ballast Resistor only. Made in Japan
$39.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$14.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$20.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...
$20.00 Add:
A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....
$7.00 Add:
Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs
$1.00 Add:
$10.50 Add:
$1.00 Add:
Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up
$1.75 Add:
These are the brackets used to mount the Front Sway Bar to the K-Frame
$25.00 Add:
These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame
$17.00 Add: