Product Image
Item Name
Price
This is the Standard Version, which means it is wrapped in black cloth tape, like the original. We make the best weatherstrips on the market. Using...
$24.00 Add:
This is the Standard Version, which means it is wrapped in black cloth tape, like the original. We make the best weatherstrips on the market. Using...
$24.00 Add:
This is the Regal Version, which means it is sheathed in stainless steel. Yes, I know there was never a Regal RV1/SV1, but these mirror finish strips...
$24.00 Add:
This is the Regal Version, which means it is sheathed in stainless steel. Yes, I know there was never a Regal RV1/SV1, but these mirror finish strips...
$24.00 Add:
Includes both the large and small profiles to suit the front side, rear side and top of the window frame. Enough to do one door.
$37.50 Add:
This includes enough strip for one complete rear door.
$37.50 Add:
$16.00 Add:
$16.00 Add:
One kit does both vent windows
$7.50 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
This is an original piece of glass for a front door. The same piece of glass was used for both sides; the Armourplate logo is reversed when viewed...
$50.00 Add:
This is an original piece of glass for a rear door. The same piece of glass was used for both sides; the Armourplate logo is reversed when viewed...
$50.00 Add:
This is an original piece of glass for the fixed rear window. The same piece of glass was used for both sides; the Armourplate logo is reversed when...
$50.00 Add:
Bonnet Latch Assembly, including the mechanism but not including the Badge.
$60.00 Add:
Bonnet Catch Assembly, including the spike and spring.
$45.00 Add:
Each kit is enough to do 2 handles
$10.00 Add:
Includes keys x2, door barrels x2, barrel clips x2, and barrel seals. Note these are a direct replacement for Late VC - VG. They can be used in...
$55.00 Add:
A pair of black gaskets to keep your door lock assemblies watertight. Note that you do not need to purchase these if you have already purchased the...
$8.00 Add:
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00 Add:
Salvaged Boot Latch assembly. Needs cleaning up but if sandblasting, do not blast the spindle which the Lock Barrel fits into. This part is made of a...
$40.00 Add:
Salvaged Boot Catch assembly; the part that bolts to the Boot Lid.
$25.00 Add:
Suits all models. Quality product made by an automotive OEM
$8.00 Add:
$20.00 Add:
$45.00 Add:
Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up
$1.75 Add:
$50.00 Add:
$50.00 Add:
$99.00 Add:
$60.00 Add:
$60.00 Add:
To suit RV1/SV1 Quality digital print
$16.50 Add:
To suit RV1/SV1 Quality digital print
$17.00 Add:
To suit RV1/SV1 Quality digital print
$16.50 Add:
To suit RV1 - VF Quality digital print
$26.00 Add:
To suit RV1 Printed on a plate with a satin finish
$26.00 Add:
To suit AP5 - CM Quality digital print
$6.50 Add:
To suit RV1 - VG Quality digital print
$19.00 Add:
To suit RV1 Printed on a plate with a satin finish
$26.00 Add:
$42.00 Add:
$42.00 Add:
$42.00 Add:
$52.00 Add:
Salvaged and in poor condition. Damage as shown; repair it yourself or we can arrange restoration for you; POA as we have no idea how much it will...
$45.00 Add:
3 available, all in poor condition as pictured. We can also arrange to have these restored for you; POA because we have no idea how much it will cost...
$40.00 Add:
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
If your red oil light on the dash has split or faded to a girly pink colour, this correct shade of red will have it looking the way it is supposed...
$1.50 Add:
New reproduction, perfect copy of the original
$58.00 Add:
New reproduction, perfect copy of the original. Includes shaft.
$90.00 Add:
To suit RV1 and SV1. Horizontal ridge design. Missing tabs so will need to be fitted with double-sided tape. Needs refinishing but otherwise a good...
$50.00 Add:
Blanking Plate for RV1 - SV1 models without demisting feature. Salvaged.
$15.00 Add:
$40.00 Add:
$5.00 Add:
Glove Box Hinge. Missing one screw clip. Some surface rust but still solid.
$32.00 Add:
Salvaged Dash Corner Trim, Right Hand Side
$10.00 Add:
Salvaged Dash Corner Trim, Left Hand Side
$10.00 Add:
This item is a clutch pedal pad for RV1-VC and a brake pedal pad for RV1-SV1 and manual AP5-VC
$14.00 Add:
The grey disc that goes behind the handle/winder to protect the door trim
$1.00 Add:
$2.00 Add:
Stop your Window Winders and Interior Door Handles from wobbling, rattling, and wrecking your door trim by replacing your missing springs.
$3.00 Add:
This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.
$6.50 Add:
$35.00 Add:
Covered in primer overspray that can be cleaned off. Some damage to middle panel. Backing Board needs replacement.
$27.00 Add:
Top and Bottom panels are in good condition. Couple of minor nicks to the middle panel. Good Colour. Needs new backing board.
$60.00 Add:
Rip around the door handle opening and lower panel. Backing board no good. Rough, hence price.
$30.00 Add:
Covered in overspray and pretty rough. Would look better cleaned up and on a new board. Would also look better on fire. Damage to trailing edge of...
$25.00 Add:
Good colour but there are some nicks to the middle panel. Needs new backing board.
$40.00 Add:
Rough, apart from top panel. Faded too. Could be cleaned up for bash car. How desperate are you?
$25.00 Add:
Minor damage to top and bottom panels. A bit faded. Backing board needs replacement.
$40.00 Add:
$1.00 Add:
Kit to suit the rebuild of Australian Slant 6 Oil Pumps
$280.00 Add:
Salvaged Window Regulator to suit RV1/SV1 Driver's Side Front Door. Has been ultrasonically cleaned, regreased and tested. Includes linkage arm and...
$60.00 Add:
Salvaged Window Regulator to suit RV1/SV1 Driver's Side Rear Door. Has been ultrasonically cleaned, regreased and tested. Includes linkage arm and...
$60.00 Add:
This is one of the bolts that holds the internal door mechanisms (Door Handle Spindle or Window Winder Mechanism) to the door shell. This is a...
$0.75 Add:
This is one of the bolts that holds the internal door mechanisms (Door Handle Spindle or Window Winder Mechanism) to the door shell. This is a...
$0.75 Add:
If your Vent Window flaps around in the breeze, you need to tighten the Lower Vent Window Pivot Clamp Screw that is located behind the Window Sill....
$2.00 Add:
These are the 2x bolts that hold the Lower Vent Window Pivot to the Door Shell. These are sometimes lost by being dropped inside the door shell, so...
$1.50 Add:
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add:
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add:
The small Philips Head screws that secure the vent window assembly to the top and leading edge of the door window frame are notorious for seizing or...
$2.00 Add:
This is an original piece of glass for the Driver's Side Rear Door. Technically you could use it for the passenger side rear door too since the glass...
$45.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
Ideal if your window sill has been dented or if the mounting holes have been damaged by the screws being replaced by much larger screws. Note that...
$15.00 Add:
I bought this with a 1950's car radio and wondered what it was. A completely sealed cylinder with something moving (not rattling, but moving like it...
$16.00 Add:
This thermos is in excellent condition, having spent it's life in a laboratory instead of bouncing around in the boot of the family hack....
$45.00 Add: