Product Image
Item Name
Price
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50 Add:
To suit 225
$18.00 Add:
To suit 225
$14.00 Add:
Horn Switch Retainer Bush Set. There are the 3 little bushes that secure the horn switch. Set of 3
$6.60 Add:
Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM
$28.00 Add:
Hi Beam Dipper Switch to suit RV1 - VJ.
$16.50 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High/Low Sealed Beam
$22.00 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High Beam Single Filament Single Beam
$22.00 Add:
Headlight Switch Harness, viciously hacked out of cars wrecked back in the day when it wasn't worthwhile to carefully remove the whole wiring loom;...
$20.00 Add:
$54.00 Add:
New reproduction, perfect copy of the original. Includes shaft.
$90.00 Add:
To suit 225
$50.00 Add:
To suit RV1 and early SV1; one required per car. Quality Australian-made product. Suits all RV1 and SV1 body numbers up to SV1-2-542 and SV1-4-441
$170.00 Add:
Quality Australian-made product
$108.50 Add:
Has spent decades under a car and looks like it. Works fine; save money by buying rusty!
$5.00 Add:
$12.00 Add:
$0.50 Add:
$42.00 Add:
$40.00 Add:
Glove Box Hinge. Missing one screw clip. Some surface rust but still solid.
$32.00 Add:
$5.00 Add:
To suit RV1 - AP5 Manual Gearboxes
$20.00 Add:
$123,456.00 Add:
Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...
$22.00 Add:
Fuel Tank Sender Unit to suit RV1 and SV1 models. Complete unit including new Seal and Locking Ring
$145.00 Add:
Suits all models
$9.00 Add:
To suit RV1/SV1
$48.00 Add:
To suit all models with standard 5/16" sender tube
$33.00 Add:
To suit only models with fuel sender pickups that have been enlarged to 3/8"
$25.00 Add:
This is the O-ring seal between the Filler Tube and Tank. Suits RV1 - SV1
$16.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...
$22.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.
$15.00 Add:
Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up
$2.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is made...
$16.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is as...
$16.00 Add:
Suits RV1 - VF Slant. Image is example only, actual unit has both fittings pointing in the same direction as per original. Sealed unit.
$55.00 Add:
Suits RV1 - VF Slant with original Goss Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant with Carter...
$80.00 Add:
Suits all models
$2.20 Add:
Ryco Z14. Suits all models
$6.00 Add:
This is the seal around the Filler Tube that screws to the Boot Floor. Steel insert as per factory.
$76.00 Add:
$4.00 Add:
$150.00 Add:
$18.00 Add:
$12.00 Add:
$12.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
$45.00 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
$16.00 Add:
$16.00 Add:
$50.00 Add:
$50.00 Add:
$35.00 Add:
Original lenses were clear, but if you have a strong suspicion that everybody is ignoring you because they think 'not orange' equals 'not indicator'...
$49.00 Add:
$49.00 Add:
Original lenses were clear, but if you have a strong suspicion that everybody is ignoring you because they think 'not orange' equals 'not indicator'...
$49.00 Add:
$49.00 Add:
$5.50 Add:
This is an original piece of glass for a front door. The same piece of glass was used for both sides; the Armourplate logo is reversed when viewed...
$50.00 Add:
To suit 225. Also known as Timing Cover to Harmonic Balancer Seal
$12.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
$99.00 Add:
Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70 Add:
$50.00 Add:
This is an original piece of glass for the fixed rear window. The same piece of glass was used for both sides; the Armourplate logo is reversed when...
$50.00 Add:
55.6mm Fits all models
$10.00 Add:
$18.00 Add:
New but looks old as it has been bouncing around the shed for a while
$3.00 Add:
Standard generic model
$15.00 Add:
Heavier grade than the original. Old stock.
$20.00 Add:
Copper-faced gasket, old stock, brand unknown
$11.00 Add:
$11.95 Add:
Full gasket set to suit 225
$131.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Instructions Your original coil will be reused
$340.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Electronic Coil Instructions
$390.00 Add:
To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00 Add:
The small Philips Head screws that secure the vent window assembly to the top and leading edge of the door window frame are notorious for seizing or...
$2.00 Add:
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add:
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add:
These are the 2x bolts that hold the Lower Vent Window Pivot to the Door Shell. These are sometimes lost by being dropped inside the door shell, so...
$1.50 Add:
If your Vent Window flaps around in the breeze, you need to tighten the Lower Vent Window Pivot Clamp Screw that is located behind the Window Sill....
$2.00 Add:
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one rear door.
$33.00 Add:
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one front door.
$33.00 Add:
Correct woven type, for all four doors, tan/beige (gold) in colour
$460.00 Add:
Correct woven type, for all four doors, red in colour
$460.00 Add:
Correct woven type, for all four doors, palomino (red/rose) in colour
$460.00 Add:
Correct woven type, for all four doors, grey in colour
$460.00 Add:
Correct woven type, for all four doors, green/gold in colour
$460.00 Add:
Correct woven type, for all four doors, fawn/sand in colour
$460.00 Add:
Correct woven type, for all four doors, copper/brown in colour
$460.00 Add:
Correct woven type, for all four doors, champagne in colour
$460.00 Add:
Correct woven type, for all four doors, blue metallic in colour
$460.00 Add:
Correct woven type, for all four doors, black in colour
$460.00 Add:
Correct woven type, for all four doors, aqua in colour
$460.00 Add:
This is one of the bolts that holds the internal door mechanisms (Door Handle Spindle or Window Winder Mechanism) to the door shell. This is a...
$0.75 Add: