Product Image
Item Name
Price
To suit RV1/SV1 Quality digital print
$16.50 Add:
To suit RV1 - VF Quality digital print
$26.00 Add:
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00 Add:
Suits RV1 - AP6 These are the bolts that hold the Parking Lock Cover on. There are 5x per car. [note to self; these also fit...
$3.00 Add:
$85.00 Add:
6 per car. Suits all models.
$4.50 Add:
To suit RV1 - early AP5 Manual Gearboxes
$42.00 Add:
Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00 Add:
NOS Speedometer Cable Shaft; use this with your original cable sheath. This is to suit R and S Series Valiant only, both Auto and Manual.
$55.00 Add:
$12.00 Add:
Whilst unfortunately not perfect due to being stored in damp conditions, this is perfect for a survivor car. Suits all models with Chrysler...
$72.00 Add:
Includes all parts pictured (not sure if there should be more). Suits Slant and 273 up to VF EDIT: No longer includes springs
$16.00 Add:
A50 Type Air Filter as used on all 225 RV1 - VC as well as most VH - VJ 215 and 245 with 1BBL Carter Carburettor
$24.50 Add:
This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.
$6.50 Add:
This kit includes the ball and trunnion boot and the clamps required to fit it. Note: you may need a larger type if your running gear has been...
$50.00 Add:
Not currently available (I'm working on it)
$38.50 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add:
Two pin type to suit all models with Points; RV1 - VH
$8.80 Add:
$32.00 Add:
$65.00 Add:
$18.00 Add:
To suit AP5 - CM Quality digital print
$6.50 Add:
To suit SV1 Printed on a plate with a satin finish
$26.00 Add:
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00 Add:
$20.00 Add:
Suits all models. Quality product made by an automotive OEM
$8.00 Add:
Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies
$1.00 Add:
Salvaged Boot Catch assembly; the part that bolts to the Boot Lid.
$25.00 Add:
Salvaged Boot Latch assembly. Needs cleaning up but if sandblasting, do not blast the spindle which the Lock Barrel fits into. This part is made of a...
$40.00 Add:
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00 Add:
$67.00 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50 Add:
This is a set of 4 Brake Shoes to do both front brakes
$45.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add:
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00 Add:
This item is a clutch pedal pad for RV1-VC and a brake pedal pad for RV1-SV1 and manual AP5-VC
$14.00 Add:
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
Salvaged. Crusty and dusty but not rusted out. Get out the wire brush!
$35.00 Add:
$27.50 Add:
2-1/8", brass. Suits all 6 cylinder models
$5.00 Add:
This part is the round rubber part that fits around the rod from the accelerator
$18.00 Add:
To suit all Slants from RV1 - VC with a Carter carburettor. Note that some AP5s have a Holley carburettor; these have the word 'Holley' cast into...
$103.00 Add:
$9.00 Add:
$22.00 Add:
$22.00 Add:
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Suits all models
$8.00 Add:
Set of 4 Clutch Pivot Bushes
$12.00 Add:
$13.50 Add:
Restoration-correct part to suit all Manual gearbox models
$17.00 Add:
$17.00 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273 Bonus storytime: Sometime in early/mid 2012 I went to see Geoff Dundon of Replacement Valiant...
$7.70 Add:
$74.50 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$13.20 Add:
Salvaged Dash Corner Trim, Left Hand Side
$10.00 Add:
Salvaged Dash Corner Trim, Right Hand Side
$10.00 Add:
If your red oil light on the dash has split or faded to a girly pink colour, this correct shade of red will have it looking the way it is supposed...
$1.50 Add:
Blanking Plate for RV1 - SV1 models without demisting feature. Salvaged.
$15.00 Add:
To suit all RV1 - Early VC
$15.00 Add:
To suit all models up to early VG
$74.00 Add:
$22.00 Add:
Original style Nylon gear with Spring Pin to fit to Distributor Shaft
$28.00 Add:
Includes both the large and small profiles to suit the front side, rear side and top of the window frame. Enough to do one door.
$37.50 Add:
This includes enough strip for one complete rear door.
$37.50 Add:
Inner Weatherstrip, to suit Front Doors, Right or Left side
$29.00 Add:
Inner Weatherstrip, to suit Rear Doors, Right or Left side
$29.00 Add:
This is the Regal Version, which means it is sheathed in stainless steel. Yes, I know there was never a Regal RV1/SV1, but these mirror finish strips...
$24.00 Add:
This is the Standard Version, which means it is wrapped in black cloth tape, like the original. We make the best weatherstrips on the market. Using...
$24.00 Add:
This is the Regal Version, which means it is sheathed in stainless steel. Yes, I know there was never a Regal RV1/SV1, but these mirror finish strips...
$24.00 Add:
This is the Standard Version, which means it is wrapped in black cloth tape, like the original. We make the best weatherstrips on the market. Using...
$24.00 Add:
Stop your Window Winders and Interior Door Handles from wobbling, rattling, and wrecking your door trim by replacing your missing springs.
$3.00 Add:
Each kit is enough to do 2 handles
$10.00 Add:
Includes keys x2, door barrels x2, barrel clips x2, and barrel seals. Note these are a direct replacement for Late VC - VG. They can be used in...
$55.00 Add:
A pair of black gaskets to keep your door lock assemblies watertight. Note that you do not need to purchase these if you have already purchased the...
$8.00 Add:
This is one of the bolts that holds the internal door mechanisms (Door Handle Spindle or Window Winder Mechanism) to the door shell. This is a...
$0.75 Add:
This is one of the bolts that holds the internal door mechanisms (Door Handle Spindle or Window Winder Mechanism) to the door shell. This is a...
$0.75 Add:
Correct woven type, for all four doors, aqua in colour
$460.00 Add:
Correct woven type, for all four doors, black in colour
$460.00 Add:
Correct woven type, for all four doors, blue metallic in colour
$460.00 Add:
Correct woven type, for all four doors, champagne in colour
$460.00 Add:
Correct woven type, for all four doors, copper/brown in colour
$460.00 Add:
Correct woven type, for all four doors, fawn/sand in colour
$460.00 Add:
Correct woven type, for all four doors, green/gold in colour
$460.00 Add:
Correct woven type, for all four doors, grey in colour
$460.00 Add:
Correct woven type, for all four doors, palomino (red/rose) in colour
$460.00 Add:
Correct woven type, for all four doors, red in colour
$460.00 Add:
Correct woven type, for all four doors, tan/beige (gold) in colour
$460.00 Add:
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one front door.
$33.00 Add:
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one rear door.
$33.00 Add:
If your Vent Window flaps around in the breeze, you need to tighten the Lower Vent Window Pivot Clamp Screw that is located behind the Window Sill....
$2.00 Add:
These are the 2x bolts that hold the Lower Vent Window Pivot to the Door Shell. These are sometimes lost by being dropped inside the door shell, so...
$1.50 Add:
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add:
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00 Add: