Product Image
Item Name
Price
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$43.00 Add:
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70 Add:
Suits all models except RV1.
$24.00 Add:
If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.
$5.75 Add:
Suits all Valiant models except R Series For R/H outer and L/H inner
$16.50 Add:
Suits all Valiant models except R Series For L/H outer and R/H inner
$16.50 Add:
If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer
$5.85 Add:
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50 Add:
Sold as a pair, Single Piece Type
$25.00 Add:
Suits SV1, AP5 and 6 cylinder AP6
$124.00 Add:
Suits manual Steering Box
$15.00 Add:
Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.
$32.00 Add:
Pair of MDI Seals. Suits all models
$26.00 Add:
Includes 2 pairs to suit both front wheels
$44.00 Add:
Includes 2 pairs to suit both rear wheels. Suits all models up to late CL
$44.00 Add:
$25.00 Add:
This kit is to suit the rebuild of the RV1-SV1 Master Cylinder
$35.00 Add:
Early model Master Cylinder. This is the type with the cover held down with the bolt, but it can be used to replace the type with the screw type lid,...
$175.00 Add:
$185.00 Add:
This is a set of 4 Brake Shoes to do both front brakes
$45.00 Add:
$99.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add:
$99.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...
$55.00 Add:
$38.50 Add:
$38.50 Add:
Rubbers feel supple. Box is nice.
$20.00 Add:
Made in Australia by PBR in 2001. Rubbers feel supple.
$10.00 Add:
$22.00 Add:
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00 Add:
The yellow one. 2x per drum-braked wheel
$8.50 Add:
$105.60 Add:
Two required per car
$65.00 Add:
$38.00 Add:
$0.50 Add:
To suit all Valiant models except those with Sure-Grip Limited Slip Diffs
$22.00 Add:
This kit includes the ball and trunnion boot and the clamps required to fit it. Note: you may need a larger type if your running gear has been...
$50.00 Add:
Includes Bearing, Lock Collar and Rear Axle Seal. One set per wheel.
$66.00 Add:
$22.00 Add:
To suit all RV1 - Early VC
$15.00 Add:
To suit all models up to early VG
$74.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
$2.00 Add:
Includes flat washer
$2.50 Add:
Suits all models with 34mm dia front leaf spring bushes. Price is for 4 Bushes, enough for 1 car
$24.00 Add:
Suits all models with 34mm dia front leaf spring bushes. Price is for a pair; enough to do 1 car
$28.00 Add:
$68.00 Add:
Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...
$45.00 Add:
Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...
$20.00 Add:
Quality US-made product. Sold as a pair.
$155.00 Add:
Quality SuperPro polyurethane product. 4 bushes are supplied; enough to do 1 car
$45.00 Add:
$11.95 Add:
Copper-faced gasket, old stock, brand unknown
$11.00 Add:
$46.00 Add:
Suits all models from RV1 - VG
$22.00 Add:
Re-key your doors and ignition to use the same key. Ignition Barrel is exact replacement for all models from RV1-VG. Door Barrels are exact...
$80.00 Add:
Whilst unfortunately not perfect due to being stored in damp conditions, this is perfect for a survivor car. Suits all models with Chrysler...
$72.00 Add:
NOS Bosch RE55 Voltage Regulator. In storage for over 20 years, this Australian-made unit has been waiting long enough to become part of your project!
$45.00 Add:
Starter Relay to suit RV1 - VC Automatic
$27.50 Add:
Starter Relay to suit RV1 - VC Manual
$27.50 Add:
Two pin type to suit all models with Points; RV1 - VH
$8.80 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$13.20 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$15.00 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$16.20 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$15.00 Add:
$22.00 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$7.70 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$12.00 Add:
For use with Ballast Resistor only. Made in Japan
$39.00 Add:
For use with Ballast Resistor only. Box looks like new but this one has been on the shelf for a while as evidenced by the "Manufactured by Robert...
$58.00 Add:
BCP5ES
$5.60 Add:
Original Style
$6.00 Add:
To suit all 225. Fel-Pro brand, made in USA.
$21.00 Add:
Spark Plug Tube from a salvaged engine
$4.00 Add:
NGK Brand
$49.50 Add:
Top Gun Brand
$50.00 Add:
Splitfire Brand
$95.00 Add:
Suits all models
$16.50 Add:
$45.00 Add:
Hi Beam Dipper Switch to suit RV1 - VJ.
$16.50 Add:
$10.50 Add:
To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00 Add:
$4.50 Add:
Standard bulb as used in all dashboard bayonet applications.
$1.00 Add:
Standard bulb as used in all number plate light assemblies
$1.00 Add:
Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies
$1.00 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High Beam Single Filament Single Beam
$18.00 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High/Low Sealed Beam
$20.00 Add:
If your indicator refuses to cancel after turning a corner, chances are one of the tabs has broken off. A common problem which is easily fixed with a...
$25.00 Add:
Before ordering this product, please note: you may only need the Cancelling Cam, which is much cheaper! If you are having an issue such as the...
$110.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$14.00 Add: