Product Image
Item Name
Price
The small Philips Head screws that secure the vent window assembly to the top and leading edge of the door window frame are notorious for seizing or...
$2.00 Add:
To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Electronic Coil Instructions
$390.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Instructions Your original coil will be reused
$340.00 Add:
$11.95 Add:
Copper-faced gasket, old stock, brand unknown
$11.00 Add:
Heavier grade than the original. Old stock.
$20.00 Add:
Standard generic model
$15.00 Add:
New but looks old as it has been bouncing around the shed for a while
$3.00 Add:
$18.00 Add:
55.6mm Fits all models
$10.00 Add:
This is an original piece of glass for the fixed rear window. The same piece of glass was used for both sides; the Armourplate logo is reversed when...
$50.00 Add:
$50.00 Add:
Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70 Add:
$99.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
This is an original piece of glass for a front door. The same piece of glass was used for both sides; the Armourplate logo is reversed when viewed...
$50.00 Add:
$5.50 Add:
$49.00 Add:
Original lenses were clear, but if you have a strong suspicion that everybody is ignoring you because they think 'not orange' equals 'not indicator'...
$49.00 Add:
$49.00 Add:
Original lenses were clear, but if you have a strong suspicion that everybody is ignoring you because they think 'not orange' equals 'not indicator'...
$49.00 Add:
$35.00 Add:
$50.00 Add:
$50.00 Add:
$16.00 Add:
$16.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
$45.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00 Add:
$12.00 Add:
$12.00 Add:
$18.00 Add:
$150.00 Add:
$4.00 Add:
This is the seal around the Filler Tube that screws to the Boot Floor. Steel insert as per factory.
$76.00 Add:
Suits all models
$2.20 Add:
Suits RV1 - VF Slant with original Goss Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant with Carter...
$80.00 Add:
Suits RV1 - VF Slant. Image is example only, actual unit has both fittings pointing in the same direction as per original. Sealed unit.
$55.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is as...
$16.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is made...
$16.00 Add:
Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up
$2.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.
$15.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...
$22.00 Add:
This is the O-ring seal between the Filler Tube and Tank. Suits RV1 - SV1
$16.00 Add:
To suit only models with fuel sender pickups that have been enlarged to 3/8"
$25.00 Add:
To suit all models with standard 5/16" sender tube
$37.50 Add:
To suit RV1/SV1
$48.00 Add:
Suits all models
$9.00 Add:
Fuel Tank Sender Unit to suit RV1 and SV1 models. Complete unit including new Seal and Locking Ring
$145.00 Add:
Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...
$22.00 Add:
***IMPORTANT NOTE*** RV1 / SV1 Boot Seal is unavailable until further notice. The company that made the Boot Seal collapsed last year. I am having...
$1,140.00 Add:
To suit RV1 - AP5 Manual Gearboxes
$20.00 Add:
$5.00 Add:
Glove Box Hinge. Missing one screw clip. Some surface rust but still solid.
$32.00 Add:
$40.00 Add:
Salvaged, but in excellent condition. Hit it with a polishing wheel and it will almost look like new. Note that the one in the picture is just one of...
$45.00 Add:
Salvaged, but in excellent condition. Hit it with a polishing wheel and it will almost look like new. Note that the one in the picture is just one of...
$45.00 Add:
$0.50 Add:
$12.00 Add:
Has spent decades under a car and looks like it. Works fine; save money by buying rusty!
$5.00 Add:
Quality Australian-made product
$108.50 Add:
To suit late SV1; one required per car. Quality Australian-made product. Suits SV1 body numbers SV1-2-543 and SV1-4-442 and later.
$48.00 Add:
To suit late SV1; two required per car. Quality Australian-made product. Suits SV1 body numbers SV1-2-543 and SV1-4-442 and later.
$84.00 Add:
To suit RV1 and early SV1; one required per car. Quality Australian-made product. Suits all RV1 and SV1 body numbers up to SV1-2-542 and SV1-4-441
$170.00 Add:
New reproduction, perfect copy of the original. Includes shaft.
$90.00 Add:
Headlight Switch Harness, viciously hacked out of cars wrecked back in the day when it wasn't worthwhile to carefully remove the whole wiring loom;...
$20.00 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High Beam Single Filament Single Beam
$22.00 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High/Low Sealed Beam
$22.00 Add:
Hi Beam Dipper Switch to suit RV1 - VJ.
$16.50 Add:
Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM
$28.00 Add:
Horn Switch Retainer Bush Set. There are the 3 little bushes that secure the horn switch. Set of 3
$6.60 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
Re-key your doors and ignition to use the same key. Ignition Barrel is exact replacement for all models from RV1-VG. Door Barrels are exact...
$80.00 Add:
Suits all models from RV1 - VG
$22.00 Add:
For use with Ballast Resistor
$58.00 Add:
For use with Ballast Resistor only. Made in Japan
$39.00 Add:
$46.00 Add:
If your indicator refuses to cancel after turning a corner, chances are one of the tabs has broken off. A common problem which is easily fixed with a...
$25.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$14.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$20.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...
$20.00 Add:
A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....
$7.00 Add:
Before ordering this product, please note: you may only need the Cancelling Cam, which is much cheaper! If you are having an issue such as the...
$110.00 Add:
Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs
$1.00 Add:
$45.00 Add:
$4.50 Add:
$10.50 Add:
Top and Bottom panels are in good condition. Couple of minor nicks to the middle panel. Good Colour. Needs new backing board.
$60.00 Add:
Good colour but there are some nicks to the middle panel. Needs new backing board.
$40.00 Add:
Rip around the door handle opening and lower panel. Backing board no good. Rough, hence price.
$30.00 Add:
Rough, apart from top panel. Faded too. Could be cleaned up for bash car. How desperate are you?
$25.00 Add:
Minor damage to top and bottom panels. A bit faded. Backing board needs replacement.
$40.00 Add:
Covered in primer overspray that can be cleaned off. Some damage to middle panel. Backing Board needs replacement.
$27.00 Add:
Covered in overspray and pretty rough. Would look better cleaned up and on a new board. Would also look better on fire. Damage to trailing edge of...
$25.00 Add: