Product Image
Item Name Price
Suits manual Steering Box
$35.00
Suits manual Steering Box
$15.00
Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.
$32.00
Suits all models
$1.50
Suits all models
$49.00
To suit all 6 cylinder models
$4.50
Opening temp = 82 degrees
$13.20
If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer
$5.85
Pair of MDI Seals. Suits all models
$26.00
To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...
$49.00
To suit all Valiant models except those with Sure-Grip Limited Slip Diffs
$22.00
Includes nuts and washers.
$30.00
Nolathane or Moog brand
$17.00
Quality Australian-made Mackay Rubber product. 4 required per car
$15.00
Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.
$40.00
Suits all models. Order 12x for Hemi or Slant, 16x for V8
$3.00
NOS Bosch RE55 Voltage Regulator. In storage for over 20 years, this Australian-made unit has been waiting long enough to become part of your project!
$45.00
1-5/8", brass. Suits Slant, Hemi and V8 models
$5.00
1-5/8", brass. Suits Slant, Hemi and V8 models
$5.00
Gasket that goes under the Wheel Cylinder. Suits all models
$4.00
Includes flat washer
$2.50
$2.00
$2.00
To suit all models. Generic, inoffensive-looking assembly; kit includes everything from button to nozzles
$32.00
$3.00
$3.00
Black OEM-style wiring harness tape, as per original
$15.00
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00
Suits all models, excluding those fitted with solid disc brakes
$43.00
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70
$50.00
Suits RV1 - Early AP5 Unavailable until recently, this item is a bolt-in replacement for your original
$45.00
To suit RV1 and early SV1; one required per car. Quality Australian-made product. Suits all RV1 and SV1 body numbers up to SV1-2-542 and SV1-4-441
$170.00
To suit all models up to early VG
$74.00
To suit all TorqueFlite transmissions built prior to 1966
$9.00
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00
To suit RV1/SV1 Quality digital print
$16.50
$85.00
$32.00
Salvaged Boot Catch assembly; the part that bolts to the Boot Lid.
$25.00
Salvaged Boot Latch assembly. Needs cleaning up but if sandblasting, do not blast the spindle which the Lock Barrel fits into. This part is made of a...
$40.00
$55.00
This part is the round rubber part that fits around the rod from the accelerator
$18.00
Salvaged Dash Corner Trim, Left Hand Side
$10.00
Salvaged Dash Corner Trim, Right Hand Side
$10.00
If your red oil light on the dash has split or faded to a girly pink colour, this correct shade of red will have it looking the way it is supposed...
$1.50
Blanking Plate for RV1 - SV1 models without demisting feature. Salvaged.
$15.00
$22.00
Original style Nylon gear with Spring Pin to fit to Distributor Shaft
$28.00
Includes both the large and small profiles to suit the front side, rear side and top of the window frame. Enough to do one door.
$27.50
This includes enough strip for one complete rear door.
$27.50
Inner Weatherstrip, to suit Front Doors, Right or Left side
$29.00
Inner Weatherstrip, to suit Rear Doors, Right or Left side
$29.00
This is the Regal Version, which means it is sheathed in stainless steel. Yes, I know there was never a Regal RV1/SV1, but these mirror finish strips...
$24.00
This is the Standard Version, which means it is wrapped in black cloth tape, like the original. We make the best weatherstrips on the market. Using...
$24.00
This is the Regal Version, which means it is sheathed in stainless steel. Yes, I know there was never a Regal RV1/SV1, but these mirror finish strips...
$24.00
This is the Standard Version, which means it is wrapped in black cloth tape, like the original. We make the best weatherstrips on the market. Using...
$24.00
Stop your Window Winders and Interior Door Handles from wobbling, rattling, and wrecking your door trim by replacing your missing springs.
$3.00
Each kit is enough to do 2 handles
$10.00
This is one of the bolts that holds the internal door mechanisms (Door Handle Spindle or Window Winder Mechanism) to the door shell. This is a...
$0.75
This is one of the bolts that holds the internal door mechanisms (Door Handle Spindle or Window Winder Mechanism) to the door shell. This is a...
$0.75
Correct woven type, for all four doors, aqua in colour
$460.00
Correct woven type, for all four doors, black in colour
$460.00
Correct woven type, for all four doors, blue metallic in colour
$460.00
Correct woven type, for all four doors, champagne in colour
$460.00
Correct woven type, for all four doors, copper/brown in colour
$460.00
Correct woven type, for all four doors, fawn/sand in colour
$460.00
Correct woven type, for all four doors, green/gold in colour
$460.00
Correct woven type, for all four doors, grey in colour
$460.00
Correct woven type, for all four doors, palomino (red/rose) in colour
$460.00
Correct woven type, for all four doors, red in colour
$460.00
Correct woven type, for all four doors, tan/beige (gold) in colour
$460.00
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one front door.
$33.00
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one rear door.
$33.00
If your Vent Window flaps around in the breeze, you need to tighten the Lower Vent Window Pivot Clamp Screw that is located behind the Window Sill....
$2.00
These are the 2x bolts that hold the Lower Vent Window Pivot to the Door Shell. These are sometimes lost by being dropped inside the door shell, so...
$1.50
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00
Although the Front Vent Window Rubbers seem to stand up well to UV light, like all rubbers they will perish eventually under the Australian sun....
$50.00
The small Philips Head screws that secure the vent window assembly to the top and leading edge of the door window frame are notorious for seizing or...
$2.00
This is an original piece of glass for the fixed rear window. The same piece of glass was used for both sides; the Armourplate logo is reversed when...
$50.00
This is an original piece of glass for a front door. The same piece of glass was used for both sides; the Armourplate logo is reversed when viewed...
$50.00
$5.50
$49.00
Original lenses were clear, but if you have a strong suspicion that everybody is ignoring you because they think 'not orange' equals 'not indicator'...
$49.00
$49.00
Original lenses were clear, but if you have a strong suspicion that everybody is ignoring you because they think 'not orange' equals 'not indicator'...
$49.00
$35.00
$50.00
$50.00
$45.00
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00
Salvaged Front Vent Window, good condition with no scratches or chips. The same piece of glass was used for both sides; the etched logo is reversed...
$40.00
$18.00
$150.00
This is the O-ring seal between the Filler Tube and Tank. Suits RV1 - SV1
$16.00
To suit RV1/SV1
$48.00
Glove Box Hinge. Missing one screw clip. Some surface rust but still solid.
$32.00
$40.00
