Log In

Home :: SV1

SV1

Following the success of the R Series, the S Series was released in March of 1962. Although there were minor changes under the skin, the most notable differences were cosmetic. The most obvious of these was the replacement of the iconic simulated spare wheel pressing on the boot lid with a large Valiant motif. Although R Series owners were presumably unimpressed about no longer owning the current model after no more than two months, their revenge came in the form of the hordes of people who ask S Series owners if theirs is "the one with the spare tyre thingy on the boot?" 10009 S Series were produced and it is estimated that roughly 1/3 of these are still in existence today.

Displaying 301 to 380 (of 380 auto parts)

[<< Prev] 1 2 3 4

Product Image	Item Name	Price
	K-Frame Sway Bar Mounting Bracket These are the brackets used to mount the Front Sway Bar to the K-Frame	$25.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 18mm These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 20mm These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 22mm These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 23mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 24mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 25mm These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 27mm These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 30mm These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 727 Quality kit with braided sheathing	$110.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 904 Quality kit with braided sheathing	$110.00 Add:
	Manifold Stud and Nut Suits all Slant and Hemi engines	$4.50 Add:
	Manifold Washer, Original Round Type, Salvaged These original salvaged conical washers are to suit Slant and V8 engines.	$5.00 Add:
	Manifold Washer, Original Triangle Type, Salvaged Unavailable as a factory-correct reproduction, these original salvaged washers feature the concave shape. Suitable for both Slant and Hemi	$5.00 Add:
	Neutral Safety Switch, Torqueflite 3-pin This will fit all Torqueflite transmissions from VF to CM. It can be used to replace the earlier one pin type, which is no longer available, with...	$55.00 Add:
	Number Plate Bulb Standard bulb as used in all number plate light assemblies	$1.00 Add:
	Oil Pressure Switch Suits all models	$16.50 Add:
	Pump / Converter Seal Suits TorqueFlite 904	$18.50 Add:
	Radiator Cap	$11.00 Add:
	Radiator Cap, Pressure Relief	$28.90 Add:
	Radio Bulb Standard Bulb used to light the Radio Dial and several other interior applications	$1.00 Add:
	Rear Brake Hose, Braided Top quality hose, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...	$55.00 Add:
	Rear Extension Housing Seal Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic	$32.00 Add:
	Rear Shock Absorber Bush Set Quality SuperPro polyurethane product. 4 bushes are supplied; enough to do 1 car	$45.00 Add:
	Rear Shock Absorber Lower Mounting Set Set includes enough to do one rear shock; 4x Washers and 2x Nuts	$19.00 Add:
	Rear Shock Absorber Set, Monroe Gas Quality US-made product. Sold as a pair.	$155.00 Add:
	Rear Spring Front Bush Suits all models with 34mm dia front leaf spring bushes. Price is for 4 Bushes, enough for 1 car	$24.00 Add:
	Rear Spring Front Bush, Urethane Suits all models with 34mm dia front leaf spring bushes. Price is for a pair; enough to do 1 car	$38.00 Add:
	Rear Spring Shackle Bush Set, Nolathane, 22mm Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...	$20.00 Add:
	Rear Spring Shackle Bush Set, Rubber, 22mm Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...	$45.00 Add:
	Slant, Hemi and V8 Dual Valve Springs, Competition Spec To suit Slant 6, Hemi and Small Block engines running camshafts with lift over 0.500". Exceeds E49 and E55 factory specifications. Sold individually...	$15.50 Add:
	Slant, Hemi and V8 Valve Springs with Damper, E49/E55 Spec To suit Slant 6, Hemi and Small Block. Sold individually so 6 cylinder owners can order 12 and V8 owners can order 16	$13.00 Add:
	Spark Plug, NGK BP5ES	$5.60 Add:
	Spark Plug, NGK BCP5ES	$5.60 Add:
	Spigot Bush Quality Australian-made sintered bronze product. Suits all manual transmissions.	$11.00 Add:
	Steering Box Lower Oil Seal Suits manual Steering Box	$35.00 Add:
	Steering Box Upper Oil Seal Suits manual Steering Box	$15.00 Add:
	Steering Coupling Repair Kit Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.	$32.00 Add:
	Sump Plug Washer Suits all models	$1.50 Add:
	Sway Bar Links and Rubbers Suits all models	$49.00 Add:
	Thermostat Gasket, Slant and Hemi To suit all 6 cylinder models	$4.50 Add:
	Thermostat, Slant & Hemi Opening temp = 82 degrees	$13.20 Add:
	Tie Rod End Rubber Boot If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer	$5.85 Add:
	Torsion Bar Seals Pair of MDI Seals. Suits all models	$26.00 Add:
	Transmission / Gearbox Mount To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...	$49.00 Add:
	Universal Joint To suit all Valiant models except those with Sure-Grip Limited Slip Diffs	$22.00 Add:
	Upper Control Arm Bump Stops, MDI, Pair Includes nuts and washers.	$30.00 Add:
	Upper Control Arm Bush, Polyurethane Nolathane or Moog brand	$17.00 Add:
	Upper Control Arm Bush, Rubber Quality Australian-made Mackay Rubber product. 4 required per car	$15.00 Add:
	Upper Control Arm Offset Bolts Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.	$40.00 Add:
	Valve Stem Seal Suits all models. Order 12x for Hemi or Slant, 16x for V8	$3.00 Add:
	Voltage Regulator, Bosch RE55, NOS NOS Bosch RE55 Voltage Regulator. In storage for over 20 years, this Australian-made unit has been waiting long enough to become part of your project!	$45.00 Add:
	Welch Plug, 1-5/8" 1-5/8", brass. Suits Slant, Hemi and V8 models	$5.00 Add:
	Welch Plug, 1-5/8" Disc Type 1-5/8", brass. Suits Slant, Hemi and V8 models	$5.00 Add:
	Wheel Cylinder Gasket Gasket that goes under the Wheel Cylinder. Suits all models	$4.00 Add:
	Wheel Nut, Mag Wheel, 7/16" Right Hand Thread Includes flat washer	$2.50 Add:
	Wheel Nut, Standard, Right Hand Thread	$2.00 Add:
	Window Regulator Clip	$2.00 Add:
	Windscreen Washer Complete Kit, Generic To suit all models. Generic, inoffensive-looking assembly; kit includes everything from button to nozzles	$32.00 Add:
	Wiper Linkage Bush	$3.00 Add:
	Wiper Motor Linkage Retainer Clip	$3.00 Add:
	Wiring Harness Tape, Original Style Black OEM-style wiring harness tape, as per original	$15.00 Add:
	Brake Shoes, Rear Set This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums	$50.00 Add:
	Lowering Block Kit, 1" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 1.5" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 2" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 2.5" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 3" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	180078 Torqueflite 904 Parking Lock Cover Bolt NOS Suits RV1 - AP6 These are the bolts that hold the Parking Lock Cover on. There are 5x per car. [note to self; these also fit...	$3.00 Add:
	Handbrake Cable Connector	$12.00 Add:
	Handbrake Cable Connector, Salvaged Has spent decades under a car and looks like it. Works fine; save money by buying rusty!	$5.00 Add:
	Transmission Filter, Push-Button Transmission To suit all Push-Button 904 and 727 TorqueFlite Transmissions	$19.00 Add:
	Handbrake Cable, Intermediate To suit late SV1; one required per car. Quality Australian-made product. Suits SV1 body numbers SV1-2-543 and SV1-4-442 and later.	$48.00 Add:
	Handbrake Cable, Rear To suit late SV1; two required per car. Quality Australian-made product. Suits SV1 body numbers SV1-2-543 and SV1-4-442 and later.	$84.00 Add:
	Battery Warning Decal To suit AP5 - CM Quality digital print	$6.50 Add:
	Selector Seal, Post-1966 Torqueflite To suit all TorqueFlite transmissions built after 1966	$5.50 Add:
	Headlight Switch Harness, Salvaged Headlight Switch Harness, viciously hacked out of cars wrecked back in the day when it wasn't worthwhile to carefully remove the whole wiring loom;...	$20.00 Add:
	Mercury Switch I bought this with a 1950's car radio and wondered what it was. A completely sealed cylinder with something moving (not rattling, but moving like it...	$16.00 Add:
	Rubber Kit Includes the following: Front Screen Seal, Front Screen Seal Mylar Locking Strip, Rear Screen Seal, Rear Screen Seal Mylar Locking Strip, Rear...	$1,080.00 Add:
	Vintage Thermos, original hammertone finish This thermos is in excellent condition, having spent it's life in a laboratory instead of bouncing around in the boot of the family hack....	$45.00 Add:

Displaying 301 to 380 (of 380 auto parts)

[<< Prev] 1 2 3 4