Product Image
Item Name
Price
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00 Add:
$13.50 Add:
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic
$32.00 Add:
Suits TorqueFlite 904
$18.50 Add:
To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...
$49.00 Add:
To suit Borg Warner 3 Speed Manual Gearboxes for AP5 - early VF and as a Rear Selector Seal for Borg Warner 4 Speed Manual Gearboxes
$6.00 Add:
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00 Add:
To suit Borg Warner 35 Automatic and 3 & 4 speed Manual. Includes Firewall Grommet
$118.00 Add:
Not currently available (I'm working on it)
$38.50 Add:
Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00 Add:
Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70 Add:
$12.00 Add:
$12.00 Add:
$12.00 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
$27.50 Add:
Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00 Add:
Includes nuts and washers.
$27.00 Add:
Quality Australian-made Mackay Rubber product. 4 required per car
$15.00 Add:
Nolathane or Moog brand
$17.00 Add:
Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.
$40.00 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$43.00 Add:
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70 Add:
Suits all models except RV1.
$24.00 Add:
If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.
$5.75 Add:
Suits all Valiant models except R Series For R/H outer and L/H inner
$16.50 Add:
Suits all Valiant models except R Series For L/H outer and R/H inner
$16.50 Add:
If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer
$5.85 Add:
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
Sold as a pair, Single Piece Type
$25.00 Add:
Suits SV1, AP5 and 6 cylinder AP6
$124.00 Add:
Suits all models
$44.00 Add:
Suits manual Steering Box
$15.00 Add:
Suits manual Steering Box
$15.00 Add:
Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.
$32.00 Add:
Pair of MDI Seals. Suits all models
$26.00 Add:
Includes 2 pairs to suit both front wheels
$44.00 Add:
Includes 2 pairs to suit both rear wheels. Suits all models up to late CL
$44.00 Add:
The bolt that joins the Master Cylinder Rod to the Pedal
$7.00 Add:
This kit is to suit the rebuild of the AP5 - VC Screw Top Master Cylinder
$35.00 Add:
$185.00 Add:
This is a set of 4 Brake Shoes to do both front brakes
$45.00 Add:
$99.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add:
$99.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...
$55.00 Add:
$75.00 Add:
$42.00 Add:
$42.00 Add:
Rubbers feel supple. Box is nice.
$20.00 Add:
Made in Australia by PBR in 2001. Rubbers feel supple.
$10.00 Add:
$22.00 Add:
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00 Add:
The yellow one. 2x per drum-braked wheel
$8.50 Add:
Quality Australian-made product.
$95.00 Add:
Quality Australian-made product.
$39.00 Add:
Two required per car. Quality Australian-made product.
$84.00 Add:
$38.00 Add:
$0.50 Add:
To suit all Valiant models except those with Sure-Grip Limited Slip Diffs
$22.00 Add:
This kit includes the ball and trunnion boot and the clamps required to fit it. Note: you may need a larger type if your running gear has been...
$50.00 Add:
Includes Bearing, Lock Collar and Seal for 1 wheel.
$49.50 Add:
$12.00 Add:
To suit all RV1 - Early VC
$15.00 Add:
To suit all models up to early VG
$74.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
$2.00 Add:
Includes flat washer
$2.50 Add:
Suits all models with 34mm dia front leaf spring bushes. Price is for 4 Bushes, enough for 1 car
$24.00 Add:
Suits all models with 34mm dia front leaf spring bushes. Price is for a pair; enough to do 1 car
$38.00 Add:
$68.00 Add:
Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...
$45.00 Add:
Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...
$20.00 Add:
Quality US-made product. Sold as a pair.
$155.00 Add:
Quality SuperPro polyurethane product. 4 bushes are supplied; enough to do 1 car
$45.00 Add:
Set includes enough to do one rear shock; 4x Washers and 2x Nuts
$19.00 Add:
$11.95 Add:
Copper-faced gasket, old stock, brand unknown
$11.00 Add:
Standard generic model
$15.00 Add:
Heavier grade than the original. Old stock.
$20.00 Add:
$46.00 Add:
Suits all models from RV1 - VG
$22.00 Add:
Re-key your doors and ignition to use the same key. Ignition Barrel is exact replacement for all models from RV1-VG. Door Barrels are exact...
$80.00 Add:
Whilst unfortunately not perfect due to being stored in damp conditions, this is perfect for a survivor car. Suits all models with Chrysler...
$72.00 Add:
NOS Bosch RE55 Voltage Regulator. In storage for over 20 years, this Australian-made unit has been waiting long enough to become part of your project!
$45.00 Add:
Not identical but very similar in style to the original Voltage Regulator
$55.00 Add:
Starter Relay to suit RV1 - VC Automatic
$27.50 Add: