Product Image
Item Name
Price
Suits RV1 - Early AP5 Unavailable until recently, this item is a bolt-in replacement for your original
$45.00 Add:
To suit all models up to early VG
$74.00 Add:
To suit all TorqueFlite transmissions built prior to 1966
$9.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
This item is a clutch pedal pad for RV1-VC and a brake pedal pad for RV1-SV1 and manual AP5-VC
$14.00 Add:
Whilst unfortunately not perfect due to being stored in damp conditions, this is perfect for a survivor car. Suits all models with Chrysler...
$72.00 Add:
This kit includes the ball and trunnion boot and the clamps required to fit it. Note: you may need a larger type if your running gear has been...
$50.00 Add:
Not currently available (I'm working on it)
$38.50 Add:
$65.00 Add:
$18.00 Add:
To suit all Slants from RV1 - VC with a Carter carburettor. Note that some AP5s have a Holley carburettor; these have the word 'Holley' cast into...
$103.00 Add:
To suit all RV1 - Early VC
$15.00 Add:
A pair of black gaskets to keep your door lock assemblies watertight. Note that you do not need to purchase these if you have already purchased the...
$8.00 Add:
This is the seal around the Filler Tube that screws to the Boot Floor. Steel insert as per factory.
$76.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is as...
$16.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is made...
$16.00 Add:
$5.00 Add:
Starter Relay to suit RV1 - VC Automatic
$27.50 Add:
Starter Relay to suit RV1 - VC Manual
$27.50 Add:
A50 Type Air Filter as used on all 225 RV1 - VC as well as most VH - VJ 215 and 245 with 1BBL Carter Carburettor
$24.50 Add:
Horn Switch Retainer Bush Set. There are the 3 little bushes that secure the horn switch. Set of 3
$6.60 Add:
Suits early Slant 6 blocks up to and including early VE. Includes: 3 x 1-5/8" and 1 x 2-1/8" brass cup welch plugs
$19.50 Add:
Includes all parts pictured (not sure if there should be more). Suits Slant and 273 up to VF EDIT: No longer includes springs
$16.00 Add:
$27.50 Add:
$74.50 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Electronic Coil Instructions
$390.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Instructions Your original coil will be reused
$340.00 Add:
Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70 Add:
$12.00 Add:
$12.00 Add:
Suits RV1 - VF Slant with original Goss Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant with Carter...
$80.00 Add:
$55.00 Add:
Kit to suit the rebuild of Australian Slant 6 Oil Pumps
$280.00 Add:
$110.00... more info
$340.00 Add:
$340.00 Add:
$340.00 Add:
$340.00 Add:
$340.00 Add:
Original Rope Type
$35.00 Add:
$320.00 Add:
$320.00 Add:
$320.00 Add:
$88.00 Add:
Adjustable, Tru-Roller type.
$148.50 Add:
$135.00 Add:
$11.00 Add:
$120.00 Add:
$174.00 Add:
Wow, this thing has everything; it's fast AND expensive
$385.00 Add:
$11.00 Add:
Sold as a set
$165.00 Add:
Sold individually
$5.50 Add:
$66.00 Add:
$5.00 Add:
Bosch Brand
$49.50 Add:
Eagle Brand
$50.00 Add:
Splitfire Brand
$95.00 Add:
$6.00 Add:
Includes gasket.
$55.00 Add:
To suit RV1 - VF Quality digital print
$26.00 Add:
$11.95 Add:
Copper-faced gasket, old stock, brand unknown
$11.00 Add:
Suits RV1 - VF Slant. Image is example only, actual unit has both fittings pointing in the same direction as per original. Sealed unit.
$55.00 Add:
$5.85 Add:
$33.00 Add:
To suit all 225. Fel-Pro brand, made in USA.
$21.00 Add:
Spark Plug Tube from a salvaged engine
$4.00 Add:
$4.40 Add:
$18.00 Add:
Original Style
$6.00 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
Includes keys x2, door barrels x2, barrel clips x2, and barrel seals. Note these are a direct replacement for Late VC - VG. They can be used in...
$55.00 Add:
$99.00 Add:
Re-key your doors and ignition to use the same key. Ignition Barrel is exact replacement for all models from RV1-VG. Door Barrels are exact...
$80.00 Add:
Suits all models from RV1 - VG
$22.00 Add:
$46.00 Add:
To suit RV1 - VG Quality digital print
$19.00 Add:
$99.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
One kit does both vent windows
$7.50 Add:
Not identical but very similar in style to the original Voltage Regulator
$55.00 Add:
$42.00 Add:
$42.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
$16.00 Add:
$16.00 Add:
Two pin type to suit all models with Points; RV1 - VH
$8.80 Add:
Sold as a pair, Single Piece Type
$25.00 Add:
$12.00 Add:
Hi Beam Dipper Switch to suit RV1 - VJ.
$16.50 Add:
Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00 Add:
This is a set of 4 Brake Shoes to do both front brakes
$45.00 Add:
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00 Add:
$22.00 Add:
Unbent, undamaged. Picture used is for demonstration purposes only; your item will be the same type and in good useable condition but may look...
$35.00 Add:
2-1/8", brass. Suits 225
$5.00 Add:
$68.00 Add: