Log In

Home :: AP5

AP5

The AP5 was the first fully Australian-manufactured Valiant, with the "AP" Standing for 'Australian Production'. Models built after 31 March 1964 were produced at the new Tonsley Park plant that would become synonymous with Valiant manufacture. Although some were disappointed that the AP5 did not share any design cues with the old S Series model, it was an attractive design in it's own right, and only the doors, windscreen and front guards shared with the US equivalent. The AP5 was notable for introducing the first Valiant Station Wagon; the Safari, and the first upmarket variant; the Regal. The AP5 was the last Valiant to feature a pushbutton automatic transmission; rumour has it the buttons were dropped as women found them hard to operate with long fingernails. When production ended, 49400 AP5s had been produced.

Displaying 101 to 200 (of 414 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]

Product Image	Item Name	Price
	Battery Tray Brace	$18.00 Add:
	Carburettor Kit, Carter BBS To suit all Slants from RV1 - VC with a Carter carburettor. Note that some AP5s have a Holley carburettor; these have the word 'Holley' cast into...	$103.00 Add:
	Diff Cover Plate Gasket To suit all RV1 - Early VC	$15.00 Add:
	Door Lock Gaskets A pair of black gaskets to keep your door lock assemblies watertight. Note that you do not need to purchase these if you have already purchased the...	$8.00 Add:
	Fuel Filler To Boot Floor Seal This is the seal around the Filler Tube that screws to the Boot Floor. Steel insert as per factory.	$76.00 Add:
	Fuel Sender Float, Original Type If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is as...	$16.00 Add:
	Fuel Sender Float, Solid Plastic Type If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is made...	$16.00 Add:
	Glove Box Bumps, Pair	$5.00 Add:
	Brake/Clutch Pedal Rubber, RV1-SV1, AP5-VC Manual This item is a clutch pedal pad for RV1-VC and a brake pedal pad for RV1-SV1 and manual AP5-VC	$14.00 Add:
	Idler Arm Bush, Small Bolt Type, Rubber This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$10.00 Add:
	Idler Arm, Small Bolt Type This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...	$44.00 Add:
	Selector Seal, Pre-1966 Torqueflite To suit all TorqueFlite transmissions built prior to 1966	$9.00 Add:
	Diff U-Bolt Set To suit all models up to early VG	$74.00 Add:
	2196062 Gearbox Gasket Set NOS To suit RV1 - early AP5 Manual Gearboxes	$42.00 Add:
	Gearbox Gasket Set To suit RV1 - AP5 Manual Gearboxes	$20.00 Add:
	Water Temperature Sender Suits RV1 - Early AP5 Unavailable until recently, this item is a bolt-in replacement for your original	$45.00 Add:
	Flex Plate, Slant / Hemi with Torqueflite, Salvaged	$50.00 Add:
	Ball Joint, Lower, Left Hand Suits all models, excluding those fitted with solid disc brakes. Wasp brand	$49.00 Add:
	Ball Joint, Lower, Right Hand Suits all models, excluding those fitted with solid disc brakes	$43.00 Add:
	Lower Ball Joint Rubber Boot An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...	$7.70 Add:
	1630878 Gearbox Bearing Thrust Washer NOS 2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM	$7.00 Add:
	1949424 Flex Plate to Crankshaft Bolts NOS 6 per car. Suits all models.	$4.50 Add:
	Armrest Retainer This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.	$6.50 Add:
	Bellhousing Clutch Fork Dust Boot Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.	$43.00 Add:
	Bonnet Bump Stop Assemblies, Pair	$20.00 Add:
	Bonnet Bump Stops, Pair Suits all models. Quality product made by an automotive OEM	$8.00 Add:
	Boot / Unerbonnet Bulb Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies	$1.00 Add:
	Boot Lock Assembly Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models	$32.00 Add:
	Brake Light Switch Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...	$16.50 Add:
	Bumper Bar Bolt Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut	$4.50 Add:
	Camshaft Plug, Slant and Hemi 2-1/8", brass. Suits all 6 cylinder models	$5.00 Add:
	Clutch Fork Adjuster Arm Cushion	$9.00 Add:
	Clutch Linkage Pivot Ball, Bellhousing Side	$22.00 Add:
	Clutch Linkage Pivot Ball, Body Side	$22.00 Add:
	Clutch Linkage Washer 2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster	$5.00 Add:
	Clutch Linkage Washer Suits all models	$8.00 Add:
	Clutch Pivot Half Moon Bushes Set of 4 Set of 4 Clutch Pivot Bushes	$12.00 Add:
	Clutch Pushrod Firewall Boot	$13.50 Add:
	Clutch Rod Washer Restoration-correct part to suit all Manual gearbox models	$17.00 Add:
	Clutch Torque Tube Bushing Retainer Clip	$17.00 Add:
	Clutch Torque Tube Linkage Dust Seals Set of 2 Set of 2 MDI Clutch Torque Tube Linkage Dust Seals	$10.00 Add:
	Double Filament Indicator Bulb To suit Tail Light / Brake Light and Park Light / Indicator Applications	$1.00 Add:
	Exhaust Hanger, Heavy Duty Heavier grade than the original. Old stock.	$20.00 Add:
	Exhaust Hanger, Standard Standard generic model	$15.00 Add:
	Exhaust Pipe Clamp, 1.5", shelf wear discount New but looks old as it has been bouncing around the shed for a while	$3.00 Add:
	Fan Spacer 2-3/16" 55.6mm Fits all models	$10.00 Add:
	Front Shock Absorber Lower Bush Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...	$13.80 Add:
	Front Shock Absorber Upper Bushes, Pair Genuine Mackay, Australian made. Includes inner tubes.	$80.00 Add:
	Fuel Filler to Body Gasket	$4.00 Add:
	Fuel Pump Gasket Suits all models	$2.20 Add:
	Fuel Sender Ground Strap, Salvaged Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up	$2.00 Add:
	Fuel Sender Ground Strap, Spring Steel Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.	$15.00 Add:
	Fuel Sender Ground Strap, Stainless Steel Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...	$22.00 Add:
	Fuel Tank Sender Pickup Filter, 3/8" To suit only models with fuel sender pickups that have been enlarged to 3/8"	$25.00 Add:
	Fuel Tank Sender Pickup Filter, Standard To suit all models with standard 5/16" sender tube	$33.00 Add:
	Fuel Tank Sender Seal Suits all models	$9.00 Add:
	Fuel Tank Strap J-Bolt Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...	$22.00 Add:
	Handbrake Cable Bracket Retainer Clip	$0.50 Add:
	Horn Relay Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM	$28.00 Add:
	Ignition Coil, Bosch GT40R For use with Ballast Resistor	$58.00 Add:
	Ignition Coil, Bosch SU12R For use with Ballast Resistor only. Made in Japan	$39.00 Add:
	Indicator Flasher Can If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.	$14.00 Add:
	Indicator Flasher Can, Bosch NOS If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.	$20.00 Add:
	Indicator Flasher Can, Large Type If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...	$20.00 Add:
	Indicator Steering Wheel Ring A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....	$7.00 Add:
	Instrument Panel Bayonet Bulb Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs	$1.00 Add:
	Interior Light Door Switch	$10.50 Add:
	Interior Trim Panel Clip	$1.00 Add:
	J Nut / Panel Nut, 5/16" Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up	$1.75 Add:
	K-Frame Sway Bar Mounting Bracket These are the brackets used to mount the Front Sway Bar to the K-Frame	$25.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 18mm These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 20mm These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 22mm These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 23mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 24mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 25mm These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 27mm These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 30mm These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 727 Quality kit with braided sheathing	$110.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 904 Quality kit with braided sheathing	$110.00 Add:
	Manifold Stud and Nut Suits all Slant and Hemi engines	$4.50 Add:
	Manifold Washer, Original Round Type, Salvaged These original salvaged conical washers are to suit Slant and V8 engines.	$5.00 Add:
	Manifold Washer, Original Triangle Type, Salvaged Unavailable as a factory-correct reproduction, these original salvaged washers feature the concave shape. Suitable for both Slant and Hemi	$5.00 Add:
	Neutral Safety Switch, Torqueflite 3-pin This will fit all Torqueflite transmissions from VF to CM. It can be used to replace the earlier one pin type, which is no longer available, with...	$55.00 Add:
	Number Plate Bulb Standard bulb as used in all number plate light assemblies	$1.00 Add:
	Oil Pressure Switch Suits all models	$16.50 Add:
	Pump / Converter Seal Suits TorqueFlite 904	$18.50 Add:
	Radiator Cap	$11.00 Add:
	Radiator Cap, Pressure Relief	$28.90 Add:
	Radio Bulb Standard Bulb used to light the Radio Dial and several other interior applications	$1.00 Add:
	Rear Brake Hose, Braided Top quality hose, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...	$55.00 Add:
	Rear Extension Housing Seal Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic	$32.00 Add:
	Rear Shock Absorber Bush Set Quality SuperPro polyurethane product. 4 bushes are supplied; enough to do 1 car	$45.00 Add:
	Rear Shock Absorber Lower Mounting Set Set includes enough to do one rear shock; 4x Washers and 2x Nuts	$19.00 Add:
	Rear Shock Absorber Set, Monroe Gas Quality US-made product. Sold as a pair.	$155.00 Add:
	Rear Spring Front Bush Suits all models with 34mm dia front leaf spring bushes. Price is for 4 Bushes, enough for 1 car	$24.00 Add:
	Rear Spring Front Bush, Urethane Suits all models with 34mm dia front leaf spring bushes. Price is for a pair; enough to do 1 car	$38.00 Add:
	Rear Spring Shackle Bush Set, Nolathane, 22mm Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...	$20.00 Add:
	Rear Spring Shackle Bush Set, Rubber, 22mm Quality product. Sold as a set of 4. RV1 - VH models require 2 sets per car as they are used for upper and lower shackle bushes. VK - CM models only...	$45.00 Add:
	Slant, Hemi and V8 Dual Valve Springs, Competition Spec To suit Slant 6, Hemi and Small Block engines running camshafts with lift over 0.500". Exceeds E49 and E55 factory specifications. Sold individually...	$15.50 Add:

Displaying 101 to 200 (of 414 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]