Product Image
Item Name
Price
$0.50 Add:
Salvaged, good condition. Ready for fitment or restoration Note: we have several in stock; picture is indicative of what you are buying
$45.00 Add:
Salvaged, good condition. Ready for fitment or restoration. Note: we have several in stock; picture is indicative of what you are buying
$45.00 Add:
$40.00 Add:
$5.00 Add:
To suit Wagon
$123,456.00 Add:
$123,456.00 Add:
$910.00 Add:
To suit Wagon
$123,456.00 Add:
To suit AP5 - AP6 Regal
$123,456.00 Add:
Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...
$22.00 Add:
Suits all models
$9.00 Add:
$52.00 Add:
To suit all models with standard 5/16" sender tube
$33.00 Add:
To suit only models with fuel sender pickups that have been enlarged to 3/8"
$25.00 Add:
This is the seal between the Filler Tube and Tank. Suits AP5 - CM
$20.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...
$22.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.
$15.00 Add:
Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up
$2.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is made...
$16.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is as...
$16.00 Add:
Suits RV1 - VF Slant. Image is example only, actual unit has both fittings pointing in the same direction as per original. Sealed unit.
$55.00 Add:
Suits RV1 - VF Slant with original Goss Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant with Carter...
$80.00 Add:
Suits AP6 - VE 273 with original Carter Fuel Pump. Quality Australian product. Will not fit modern sealed Fuel Pumps
$92.00 Add:
Suits all models
$2.20 Add:
To suit AP5 - VH Quality Digital Print
$6.50 Add:
This is the seal around the Filler Tube that screws to the Boot Floor. Steel insert as per factory.
$76.00 Add:
$4.00 Add:
Salvaged Front Windscreen to suit AP5 - VC. Good condition with no scratches or chips. There is no way I'll be posting this but it can be couriered...
$100.00 Add:
$159.00 Add:
$18.00 Add:
$55.00 Add:
$12.00 Add:
$12.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips.
$40.00 Add:
Salvaged Front Vent Window, good condition with no scratches or chips.
$40.00 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
$16.00 Add:
$16.00 Add:
$125.00 Add:
$125.00 Add:
$35.00 Add:
Fits VE - VG; may also fit other models with some trimming. Includes Custom Autosound 80W speakers. A professional-looking way to add speakers...
$248.00 Add:
Fits VE - VG; may also fit other models with some trimming. Includes cutout to fit 6" speakers. A professional-looking way to add speakers without...
$220.00 Add:
Not new, but then again the one on the other side that you aren't replacing isn't new either. No cracks or serious damage.
$8.00 Add:
$24.00 Add:
Salvaged. Both sides are the same.
Add:
This door is straight but unfortunately has extensive rust on the inside. This is strange because the rust has only just started on the outside...
$90.00 Add:
This door appears to be rust free and straight aside from a slight bend to the leading edge, from it being opened too far perhaps. Easily fixed, and...
$180.00 Add:
Salvaged Front Door Window Glass, good condition with no scratches or chips.
$45.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
$99.00 Add:
Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70 Add:
$50.00 Add:
55.6mm Fits all models
$10.00 Add:
$18.00 Add:
$17.00 Add:
New but looks old as it has been bouncing around the shed for a while
$3.00 Add:
Standard generic model
$15.00 Add:
Heavier grade than the original. Old stock.
$20.00 Add:
Copper-faced gasket, old stock, brand unknown
$11.00 Add:
$11.95 Add:
2x required per car; each side is the same.
$42.00 Add:
To suit AP5 - VG Quality Digital Print
$9.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Instructions Your original coil will be reused
$340.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Electronic Coil Instructions
$390.00 Add:
To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00 Add:
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one rear door.
$33.00 Add:
Generic black pinchweld, glossy woven pattern that mimics the original design. Very popular. Price is for one front door.
$33.00 Add:
Correct woven type, for all four doors, tan/beige in colour
$460.00 Add:
Correct woven type, for all four doors, red in colour
$460.00 Add:
Correct woven type, for all four doors, palomino in colour
$460.00 Add:
Correct woven type, for all four doors, grey in colour
$460.00 Add:
Correct woven type, for all four doors, green/gold in colour
$460.00 Add:
Correct woven type, for all four doors, fawn/sand in colour
$460.00 Add:
Correct woven type, for all four doors, copper/brown in colour
$460.00 Add:
Correct woven type, for all four doors, champagne in colour
$460.00 Add:
Correct woven type, for all four doors, blue metallic in colour
$460.00 Add:
Correct woven type, for all four doors, black in colour
$460.00 Add:
Correct woven type, for all four doors, aqua in colour
$460.00 Add:
A pair of black gaskets to keep your door lock assemblies watertight. Note that you do not need to purchase these if you have already purchased the...
$8.00 Add:
Includes keys x2, door barrels x2, barrel clips x2, and barrel seals. Note these are a direct replacement for Late VC - VG. They can be used in...
$55.00 Add:
This kit is to repair one hinge of the front or rear door. Suits all models except hardtop.
$25.00 Add:
Each kit is enough to do 2 handles
$10.00 Add:
NOTE: All rear weatherstrips are the same, and can be used on the inner/outer and left/right of any AP5-VC rear door. This is the Standard Version,...
$24.00 Add:
NOTE: All rear weatherstrips are the same, and can be used on the inner/outer and left/right of any AP5-VC rear door. This is the Regal Version,...
$24.00 Add:
NOTE: All front weatherstrips are the same, and can be used on the inner/outer and left/right of any AP5-VC front door. This is the Standard Version,...
$24.00 Add:
NOTE: All front weatherstrips are the same, and can be used on the inner/outer and left/right of any AP5-VC front door. This is the Regal Version,...
$24.00 Add:
This includes enough Bailey Channel strip for one front or rear door. Includes both profiles.
$27.50 Add:
Suits AP5 - CM. Quality rubber product made by an automotive OEM. By buying directly from the factory we have managed to cut out the middleman and...
$1.65 Add:
This will suit AP5 and pre-1965 AP6 225 Made in England by Bridgetrack
$25.00 Add:
To suit AP6 - VE 273
$38.50 Add:
This will suit AP5 and pre-1965 AP6 225
$20.00 Add:
This will suit 1965 AP6 - VF 225
$35.00 Add:
To suit all models up to early VG
$74.00 Add:
To suit all RV1 - Early VC
$15.00 Add:
Sold as a pair with mounting hardware
$110.00 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$13.20 Add: