Product Image
Item Name
Price
$26.00 Add:
To suit AP6/VC/VE Quality digital print
$12.00 Add:
Original salvaged 273 Rocker Arms including all Rockers and hardware as removed from vehicle
$125.00 Add:
Original salvaged 273 Rocker Covers with crappy paint job. If you're trying to get your engine bay back to original and those cheap aftermarket...
$100.00 Add:
Early Conical Type
$6.60 Add:
Suits AP6 - VE 273 with original Carter Fuel Pump. Quality Australian product. Will not fit modern sealed Fuel Pumps
$92.00 Add:
$1,100.00 Add:
$1,100.00 Add:
$1,100.00 Add:
$1,100.00 Add:
This is the small Timing Gear, removed from a 273 engine. Good condition.
$24.00 Add:
To suit AP6 - VE V8 Quality digital print
$19.00 Add:
A31 Type Air Filter as used on all 273 V8s with 2BBL Carter Carburettor
$16.50 Add:
A31 Type Air Filter as used on all 273 V8s with 2BBL Carter Carburettor This could be the last chance you get to put an Aussie air filter on your...
$24.00 Add:
To suit AP6 - VE 273
$38.50 Add:
$17.00 Add:
$85.00 Add:
$85.00 Add:
$85.00 Add:
$85.00 Add:
$85.00 Add:
$115.00 Add:
$115.00 Add:
$115.00 Add:
$115.00 Add:
$115.00 Add:
$130.00 Add:
$130.00 Add:
$130.00 Add:
$130.00 Add:
$130.00 Add:
To suit 273
$22.00 Add:
$13.20 Add:
NOS bypass hose to suit 273 with original Mopar sticker. Part number is 2465085. This is stamped on about half of the stickers. Does not come with...
$24.00 Add:
Includes gasket.
$175.00 Add:
$22.00 Add:
To suit VE - VF with 160HP 225, VG with 245 and AP6 - VJ with 273 / 318 Quality Australian product
$121.00 Add:
To suit VE - VF with 160HP 225, VG with 245 and AP6 - VJ with 273 / 318 Quality Australian product. Genuine early Mitsubishi-branded product in...
$69.00 Add:
To suit all VC models and V8 AP6
$55.00 Add:
For mounting to ridged bonnet
$40.00 Add:
This is the gasket that goes between the Gearbox Housing and the Gearbox Extension.
$14.00 Add:
Suits Late AP5 - AP6
$17.00 Add:
To suit Late AP5 - VC Quality Digital Print
$14.00 Add:
$12.00 Add:
Has spent decades under a car and looks like it. Works fine; save money by buying rusty!
$5.00 Add:
Suits RV1 - AP6 These are the bolts that hold the Parking Lock Cover on. There are 5x per car. [note to self; these also fit...
$3.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00 Add:
6 per car. Suits all models.
$4.50 Add:
This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.
$6.50 Add:
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00 Add:
$20.00 Add:
Suits all models. Quality product made by an automotive OEM
$8.00 Add:
Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies
$1.00 Add:
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00 Add:
Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50 Add:
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50 Add:
2-1/8", brass. Suits all 6 cylinder models
$5.00 Add:
$9.00 Add:
$22.00 Add:
$22.00 Add:
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Suits all models
$8.00 Add:
Set of 4 Clutch Pivot Bushes
$12.00 Add:
$13.50 Add:
Restoration-correct part to suit all Manual gearbox models
$17.00 Add:
$17.00 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00 Add:
Heavier grade than the original. Old stock.
$20.00 Add:
Standard generic model
$15.00 Add:
New but looks old as it has been bouncing around the shed for a while
$3.00 Add:
55.6mm Fits all models
$10.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
$4.00 Add:
Suits all models
$2.20 Add:
Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up
$2.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.
$15.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...
$22.00 Add:
To suit only models with fuel sender pickups that have been enlarged to 3/8"
$25.00 Add:
To suit all models with standard 5/16" sender tube
$37.50 Add:
Suits all models
$9.00 Add:
Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...
$22.00 Add:
$0.50 Add:
Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM
$28.00 Add:
For use with Ballast Resistor
$58.00 Add:
For use with Ballast Resistor only. Made in Japan
$39.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$14.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$20.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...
$20.00 Add:
A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....
$7.00 Add:
Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs
$1.00 Add:
$10.50 Add:
$1.00 Add: