Product Image
Item Name
Price
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Electronic Coil Instructions
$390.00 Add:
Includes: Mopar orange ignition box remanufactured distributor Ballast resistor Wiring Loom conversion Instructions Your original coil will be reused
$340.00 Add:
Front Axle Hub Seal. You do not need to buy this product if you are buying the Front Wheel Bearing Kit as it is included in the kit.
$7.70 Add:
$12.00 Add:
$12.00 Add:
Suits RV1 - VF Slant with original Goss Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant with Carter...
$80.00 Add:
$55.00 Add:
Kit to suit the rebuild of Australian Slant 6 Oil Pumps
$280.00 Add:
$110.00... more info
$340.00 Add:
$340.00 Add:
$340.00 Add:
$340.00 Add:
$340.00 Add:
Original Rope Type
$35.00 Add:
$320.00 Add:
$320.00 Add:
$320.00 Add:
$88.00 Add:
Adjustable, Tru-Roller type.
$148.50 Add:
$135.00 Add:
$11.00 Add:
$120.00 Add:
$174.00 Add:
Wow, this thing has everything; it's fast AND expensive
$385.00 Add:
$11.00 Add:
Sold as a set
$165.00 Add:
Sold individually
$5.50 Add:
$66.00 Add:
$5.00 Add:
Bosch Brand
$49.50 Add:
Eagle Brand
$50.00 Add:
Splitfire Brand
$95.00 Add:
$6.00 Add:
Includes gasket.
$55.00 Add:
Horn Switch Retainer Bush Set. There are the 3 little bushes that secure the horn switch. Set of 3
$6.60 Add:
Suits early Slant 6 blocks up to and including early VE. Includes: 3 x 1-5/8" and 1 x 2-1/8" brass cup welch plugs
$19.50 Add:
A50 Type Air Filter as used on all 225 RV1 - VC as well as most VH - VJ 215 and 245 with 1BBL Carter Carburettor
$24.50 Add:
Starter Relay to suit RV1 - VC Manual
$27.50 Add:
Starter Relay to suit RV1 - VC Automatic
$27.50 Add:
Whilst unfortunately not perfect due to being stored in damp conditions, this is perfect for a survivor car. Suits all models with Chrysler...
$72.00 Add:
This kit includes the ball and trunnion boot and the clamps required to fit it. Note: you may need a larger type if your running gear has been...
$50.00 Add:
Not currently available (I'm working on it)
$38.50 Add:
$65.00 Add:
$18.00 Add:
To suit all Slants from RV1 - VC with a Carter carburettor. Note that some AP5s have a Holley carburettor; these have the word 'Holley' cast into...
$103.00 Add:
To suit all RV1 - Early VC
$15.00 Add:
A pair of black gaskets to keep your door lock assemblies watertight. Note that you do not need to purchase these if you have already purchased the...
$8.00 Add:
This is the seal around the Filler Tube that screws to the Boot Floor. Steel insert as per factory.
$76.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is as...
$16.00 Add:
If you have traced the problem with your Fuel Sender to a float which is filling up with fuel due to a leak, here is your solution. This type is made...
$16.00 Add:
$5.00 Add:
Canister type oil filter to suit RV1/SV1 Slant and AP6/VC V8
$25.00 Add:
This item is a clutch pedal pad for RV1-VC and a brake pedal pad for RV1-SV1 and manual AP5-VC
$14.00 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273 Bonus storytime: Sometime in early/mid 2012 I went to see Geoff Dundon of Replacement Valiant...
$7.70 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$13.20 Add:
To suit RV1 and SV1 Slant 6 as well as AP6 - VE 273
$16.20 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
To suit all models up to early VG
$74.00 Add:
$50.00 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add:
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70 Add:
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00 Add:
6 per car. Suits all models.
$4.50 Add:
This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.
$6.50 Add:
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00 Add:
$20.00 Add:
Suits all models. Quality product made by an automotive OEM
$8.00 Add:
Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies
$1.00 Add:
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00 Add:
Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50 Add:
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50 Add:
2-1/8", brass. Suits all 6 cylinder models
$5.00 Add:
$9.00 Add:
$22.00 Add:
$22.00 Add:
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Suits all models
$8.00 Add:
Set of 4 Clutch Pivot Bushes
$12.00 Add:
$13.50 Add:
Restoration-correct part to suit all Manual gearbox models
$17.00 Add:
$17.00 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00 Add:
Heavier grade than the original. Old stock.
$20.00 Add:
Standard generic model
$15.00 Add:
New but looks old as it has been bouncing around the shed for a while
$3.00 Add:
55.6mm Fits all models
$10.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
$4.00 Add:
Suits all models
$2.20 Add:
Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up
$2.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.
$15.00 Add:
Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...
$22.00 Add:
To suit only models with fuel sender pickups that have been enlarged to 3/8"
$25.00 Add:
To suit all models with standard 5/16" sender tube
$33.00 Add: