Product Image
Item Name Price
To suit AP6 - VE V8 Quality digital print
$19.00
Sticker as applied to dealer-fitted batteries
$18.00
To suit AP6/VC/VE Quality digital print
$12.00
To suit VE / VF 160HP 225, Light Blue Quality digital print
$14.00
To suit VE / VF 160HP 225, Dark Blue Quality digital print
$14.00
To suit VE - VF with 2BBL Carburettor Quality digital print
$24.00
To suit RV1 - VF Quality digital print
$26.00
To suit VC and early VE
$10.00
To suit VC and early VE. Good condition, 3x available at this time; 1x minor pitting in one small spot, 2x no pitting but missing 1 of the two pins.
$7.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE - VF Regal
$5.00
To suit VE - VF Regal
$5.00
To suit VE - VF Regal
$5.00
To suit VC and early VE
$10.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VC and early VE
$10.00
To suit VC and early VE. Very nice original condition; all pins intact, no pitting.
$8.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE - VF Regal
$5.00
To suit VC and early VE
$10.00
To suit VC and early VE No pitting, both pins intact. Will need a polish! Picture may not be the exact item you are buying but is indicative of...
$7.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE - VF Regal
$5.00
To suit VE - VF
$48.00
To suit VC and early VE
$10.00
To suit VC and early VE. Very nice original condition, both pins intact, no pitting. Picture may not be the exact item you are buying but is...
$8.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VC and VE V8
$43.00
To suit VC and early VE
$10.00
To suit VC and early VE. One pin missing, minor pitting in one spot, otherwise good
$7.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE - VF VIP
$43.00
To suit VC and early VE. Full set.
$56.00
To suit Regal models from VE - CM
$20.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$50.00
To suit VE, VF & VG VIP
$60.00
To suit VE, VF & VG VIP
$40.00
To suit VE - VF
$29.00
To suit VE - VF
$29.00
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00
Rubbers feel supple. Box is nice.
$20.00
Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00
The yellow one. 2x per drum-braked wheel
$8.50
To suit: VF, VG, VH, VK and... VE with 273 from engine number VE6-2288 and up VE with 225 with 2bbl carburettor and engine number prefix of LVE8D VE...
$14.00
$75.00
Suits either side
$22.00
$22.00
Includes all parts pictured (not sure if there should be more). Suits Slant and 273 up to VF
$16.00
A31 Type Air Filter as used on all 273 V8s with 2BBL Carter Carburettor
$16.50
A122 Type Air Filter as used on VC fitted with Stromberg Carburettor, as well as VE/VF 145HP
$20.00
A122 Type Air Filter as used on VC fitted with Stromberg Carburettor, as well as VE/VF 145HP NOS Ryco Made in Australia
$24.00
A31 Type Air Filter as used on all 273 V8s with 2BBL Carter Carburettor This could be the last chance you get to put an Aussie air filter on your...
$24.00
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$43.00
Suits all models, excluding those fitted with solid disc brakes
$43.00
Two pin type to suit all models with Points; RV1 - VH
$8.80
$33.00
$50.00
$18.00
Salvaged but made from much heavier gauge steel than the reproductions. Looks galvanised but is probably plated. Will clean up ok
$20.00
Salvaged. Surface rust but structurally sound.
$8.00
To suit AP5 - CM Quality digital print
$6.50
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00
$20.00
Suits all models. Quality product made by an automotive OEM
$8.00
$1.00
For mounting on Bonnet Spear
$45.00
For mounting to flat bonnet
$40.00
Suits VE - CM. Quality product made by an automotive OEM. Sold individually.
$4.00
Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies
$1.00
Salvaged Boot Latch assembly. Needs cleaning up but if sandblasting, do not blast the spindle which the Lock Barrel fits into. This part is made of a...
$40.00
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00
Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50
$20.00
$15.00
To suit manual VE-VF models with front Disc Brakes
$12.50
Includes 2 pairs to suit both front wheels
$44.00
Includes 2 pairs to suit both rear wheels. Suits all models up to late CL
$44.00
This is a set of 4 Brake Shoes to do both front brakes
$45.00
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50
NOT CURRENTLY AVAILABLE Caliper Kit to rebuild one PBR DB1 caliper as found on VC - VF.
$36.00
$27.50
$50.00
2-1/8", brass. Suits all 6 cylinder models
$5.00
Early Conical Type
$6.60
To suit VE - VF with 160HP 225, VG with 245 and AP6 - VJ with 273 / 318 Quality Australian product
$49.00
valiantparts.com.au is a business I run in my spare time so it does take a while to transfer the 2000+ items from the old catalogue onto the website....
$0.01
Clutch Pedal Rubber and Brake Pedal Rubber to suit Manual VE and VF with drum brakes all round.
$14.00
$9.00
To suit any Valiant 6 or Small Block. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. For cars producing up to 450HP at the...
$1,345.00
To suit any Valiant 6 or Small Block. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. For cars producing up to 300HP at the...
$980.00
To suit any Valiant engine. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. Rated to 365HP. May give a slightly heavier pedal...
$295.00
To suit any Valiant engine. NOTE: To use with Slant 6 you will need a Thrust Race Bearing Carrier. Rated to 365HP. Includes Pressure Plate, Clutch...
$445.00
To suit Slant 6
$245.00
$22.00
$22.00
Set of 4 Clutch Pivot Bushes
$12.00
