Log In

Home :: VE

VE

The VE was an all-new model which featured flatter panels and front end sheetmetal borrowed from the US Dodge Dart. Also new was a rear window with a concave curve which has been responsible for a lot of obscene language in the immediate vicinity of window tinting businesses. Front seat belts were standard, but rear seat passengers were clearly not as important. The range was expanded to include the 'Valiant VIP' and for the first time the 273 V8 was available in a package including front power disk brakes across the entire Valiant range. The VE won Wheels Magazine's coveted Car of the Year in 1967, which was a first for Chrysler Australia. 68688 VEs were produced.

Displaying 201 to 300 (of 491 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]

Product Image	Item Name	Price
	Piston Set, Cast, 273, 0.020"	$1,100.00 Add:
	Piston Ring Set, 225	$110.00 ... more info
	Pipe Plug, 3/8" NPT 3/8" NPT. Suits V8	$5.00 Add:
	Pipe Plug, 1/2" NPT 1/2" NPT. Suits V8	$5.00 Add:
	Pentastar Guard Badge To suit various models from AP5	$24.00 Add:
	PCV Valve Grommet High temp plastic construction to suit 1/2" PCV Grommet	$12.00 Add:
	Oil Pump Rebuild Kit Kit to suit the rebuild of Australian Slant 6 Oil Pumps	$280.00 Add:
	Oil Pump Drive Gear, V8, Salvaged Salvaged Oil Pump Drive Gear to suit Small Block	$50.00 Add:
	Oil Pressure Switch Suits all models	$16.50 Add:
	Oil Filter, Screw Type, Z9 Quality Ryco Z9	$12.00 Add:
	Number Plate Bulb Standard bulb as used in all number plate light assemblies	$1.00 Add:
	Now Wrecking: VE Regal Sedan This wreck has since shuffled off to Valiant Heaven but we still have all of the panels and a reasonable set of rear quarters. Contact us for images...	Add:
	NOS Wibroc aftermarket mirror head NOS Wibroc Mirror Head, still in the box as pictured. Stainless is perfect since it still has the protective covering on it. Mirror has no foxing....	$50.00 Add:
	Neutral Safety Switch, Torqueflite 3-pin This will fit all Torqueflite transmissions from VF to CM. It can be used to replace the earlier one pin type, which is no longer available, with...	$55.00 Add:
	Mercury Switch I bought this with a 1950's car radio and wondered what it was. A completely sealed cylinder with something moving (not rattling, but moving like it...	$16.00 Add:
	Master Cylinder, Drum/Drum, Exchange Reconditioned Master Cylinder to suit models with drum brakes all round. Send us your old unit and get a reconditioned unit back ready to bolt in.	$245.00 Add:
	Master Cylinder, Disc/Drum, Exchange Reconditioned Master Cylinder to suit models with front disc brakes and rear drum brakes. Send us your old unit and get a reconditioned unit back...	$245.00 Add:
	Master Cylinder Kit, Drum/Drum	$62.00 Add:
	Master Cylinder Kit, Disc/Drum	$82.00 Add:
	Master Cylinder Fluid Sensor, Salvaged Salvaged Master Cylinder Fluid Sensor; untested but will be replaced free of charge if DOA.	$20.00 Add:
	Manifold Washer, Original Triangle Type, Salvaged Unavailable as a factory-correct reproduction, these original salvaged washers feature the concave shape. Suitable for both Slant and Hemi	$5.00 Add:
	Manifold Washer, Original Round Type, Salvaged These original salvaged conical washers are to suit Slant and V8 engines.	$5.00 Add:
	Manifold Stud and Nut Suits all Slant and Hemi engines	$4.50 Add:
	Main Bearings 273 / 318 / 340 Clevite brand	$80.00 Add:
	Main Bearing Set, Slant 6	$55.00 Add:
	Made in Australia Engine Bay Decal To suit VE - VF Quality digital print	$17.00 Add:
	Lowering Block Kit, 3" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 2.5" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 2" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 1.5" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 1" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lower Tailgate Seal To suit ute and wagon	$55.00 Add:
	Lower Control Arm Bush Pair Urethane Full kit that includes inner and outer metal sleeves	$84.00 Add:
	Lower Control Arm Bump Stop, Urethane Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.	$25.00 Add:
	Lower Ball Joint Rubber Boot An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...	$7.70 Add:
	Lock Knob, Chrome, Hardtop Suits VF - VG Hardtop	$9.00 Add:
	Lock Knob, Black, Hardtop Suits VF - VG Hardtop	$9.00 Add:
	Lock Ferrule Suits all models from AP5 to CM except VF/VG Hardtop. Sold individually.	$19.50 Add:
	Kickdown Linkage Cable Kit, Torqueflite 904 Quality kit with braided sheathing	$110.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 727 Quality kit with braided sheathing	$110.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 30mm These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 27mm These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 25mm These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 24mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 23mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 22mm These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 20mm These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 18mm These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket These are the brackets used to mount the Front Sway Bar to the K-Frame	$25.00 Add:
	Jack Instructions Decal To suit RV1 - VG Quality digital print	$19.00 Add:
	J Nut / Panel Nut, 5/16" Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up	$1.75 Add:
	Interior Trim Panels VIP Very rare Buffalo Grain VIP door trims (matching rear seat also available at time of printing). Overall in very good condition; with some work could...	$540.00 Add:
	Interior Trim Panel Clip	$1.00 Add:
	Interior Light Door Switch	$10.50 Add:
	Interior Door Handle, Right, Salvaged If your budget doesn't stretch to new handles but you'd still prefer to get out of your car without climbing through the window, why not get a random...	$5.00 Add:
	Interior Door Handle, Right New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different	$48.00 Add:
	Interior Door Handle, Left, Salvaged If your budget doesn't stretch to new handles but you'd still prefer to get out of your car without climbing through the window, why not get a random...	$5.00 Add:
	Interior Door Handle, Left New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different	$48.00 Add:
	Interior Dome Light Lens	$22.00 Add:
	Instrument Panel Bayonet Bulb Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs	$1.00 Add:
	Indicator Switch Before ordering this product, please note: you may only need the Cancelling Cam, which is much cheaper! If you are having an issue such as the...	$122.00 Add:
	Indicator Steering Wheel Ring A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....	$7.00 Add:
	Indicator Stalk, Black Knob, Salvaged Salvaged condition; all have minor surface rust on stalk but knob is not cracked	$20.00 Add:
	Indicator Orange Indicator Lens as found on the front and rear of various VC-VG models. Orange.	$35.00 Add:
	Indicator Gasket Gasket to suit Indicator Lens as found on the front and rear of various VC-VG models.	$5.50 Add:
	Indicator Flasher Can, Large Type If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...	$20.00 Add:
	Indicator Flasher Can, Bosch NOS If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.	$20.00 Add:
	Indicator Flasher Can If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.	$14.00 Add:
	Indicator Clear Indicator Lens as found on the front and rear of various VC-VG models. Clear. Quality Australian-made product.	$40.00 Add:
	Indicator Cancelling Cam If your indicator refuses to cancel after turning a corner, chances are one of the tabs has broken off. A common problem which is easily fixed with a...	$25.00 Add:
	Ignition Switch	$46.00 Add:
	Ignition Coil, Bosch SU12R For use with Ballast Resistor only. Made in Japan	$39.00 Add:
	Ignition Coil, Bosch GT40R For use with Ballast Resistor	$58.00 Add:
	Ignition Barrel and Key Suits all models from RV1 - VG	$22.00 Add:
	Ignition and Door Barrel and Key Set Re-key your doors and ignition to use the same key. Ignition Barrel is exact replacement for all models from RV1-VG. Door Barrels are exact...	$80.00 Add:
	Idler Arm, Small Bolt Type This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...	$44.00 Add:
	Idler Arm Bush, Small Bolt Type, Rubber This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$10.00 Add:
	Idler Arm Bush, Small Bolt Type, Nolathane This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$24.50 Add:
	Hydraulic Lifters, V8, Salvaged Salvaged, sold individually	$8.00 Add:
	Horn Switch Retainer Bush Set Horn Switch Retainer Bush Set. There are the 3 little bushes that secure the horn switch. Set of 3	$6.60 Add:
	Horn Relay Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM	$28.00 Add:
	Hood to Cowl Seal	$48.00 Add:
	High Beam Dipper Switch Hi Beam Dipper Switch to suit RV1 - VJ.	$16.50 Add:
	Heater Hose and Wiring Grommet To suit all VE-CM fitted with a heater	$20.00 Add:
	Heater Hose and Wiring Blanking Grommet To suit all VE-CM without a heater	$20.00 Add:
	Headlight, High/Low Beam 7" 7" (178mm) diameter to suit: AP5 AP6 VC VE VF VH VJ High/Low Sealed Beam	$20.00 Add:
	Headlight Switch Harness, Salvaged Headlight Switch Harness, viciously hacked out of cars wrecked back in the day when it wasn't worthwhile to carefully remove the whole wiring loom;...	$20.00 Add:
	Headlight Switch	$54.00 Add:
	Handbrake Cable, Rear, Right This is the short one. Quality Australian-made product.	$84.00 Add:
	Handbrake Cable, Rear, Left This is the long one. Quality Australian-made product.	$93.50 Add:
	Handbrake Cable, Front, Sedan/Wagon/Ute Suits all VE-VF-VG models except Hardtop and VF-VG VIP	$85.00 Add:
	Handbrake Cable Bracket Retainer Clip	$0.50 Add:
	Glove Box Liner To suit cars without air-con or heater	$40.00 Add:
	Glove Box Liner To suit cars with air-con or heater	$40.00 Add:
	Gearbox Rebuild Kit A very comprehensive gearbox rebuild kit including Layshaft	$185.00 Add:
	Full Rubber Kit, Wagon	$123,456.00 Add:
	Full Rubber Kit, Ute To suit Ute	$123,456.00 Add:
	Full Rubber Kit, Sedan To suit Sedan	$123,456.00 Add:
	Full Rubber Kit, Regal To suit Regal	$123,456.00 Add:
	Fuel Tank Strap J-Bolt Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...	$22.00 Add:

Displaying 201 to 300 (of 491 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]