Product Image
Item Name Price
Sticker as applied to dealer-fitted batteries
$18.00
To suit VE / VF 160HP 225, Light Blue Quality digital print
$14.00
To suit VE / VF 160HP 225, Dark Blue Quality digital print
$14.00
To suit VF/VG 318 Quality digital print
$21.00
To suit VE - VF with 2BBL Carburettor Quality digital print
$24.00
To suit VF Pacer Quality digital print
$21.00
To suit VF Pacer Quality digital print
$14.50
To suit VF Pacer Quality digital print
$14.50
To suit RV1 - VF Quality digital print
$26.00
To suit VF
$40.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE - VF Regal
$5.00
To suit VE - VF Regal
$5.00
To suit VE - VF Regal
$5.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE - VF Regal
$5.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE - VF Regal
$5.00
To suit VE - VF
$95.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00
To suit VE, VF and VG Boot, Bonnet and Tailgates
$50.00
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00
6 per car. Suits all models.
$4.50
Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00
$12.00
To suit: VF, VG, VH, VK and... VE with 273 from engine number VE6-2288 and up VE with 225 with 2bbl carburettor and engine number prefix of LVE8D VE...
$14.00
$75.00
To suit: VF from engine number F6P-2468 to F6P-2479 VF from engine number F6P-6225 to F6P-6338 VG, any engine number VH, any engine number VJ, any...
$100.00
To suit all models of 3 Speed Manual Gearboxes from VC - CM. May also suit Centura
$15.00
To suit all VC - VG Manual Gearboxes
$7.00
This is the gasket that goes between the Gearbox Housing and the Gearbox Extension. Only one available.
$14.00
To suit all VC - VG Manual Gearboxes
$27.00
$22.00
NOS Speedometer Cable Shaft; use this with your original cable sheath. This is unique to all models of VF and VG; Manual Gearbox only.
$45.00
Includes all parts pictured (not sure if there should be more). Suits Slant and 273 up to VF EDIT: No longer includes springs
$16.00
To suit VE - CL Slant and Hemi engines. Includes all gaskets, seals, bearing needles, rings, clips, etc. All parts in perfect condition except cover...
$150.00
To suit VF - VG
$80.00
To suit Borg Warner 35. NOS, no packaging
$3.50
To suit Borg Warner 35.
$5.00
To suit VE, VF and VG fitted with Torqueflite 727; possibly other models also
$22.00
A122 Type Air Filter as used on VC fitted with Stromberg Carburettor, as well as VE/VF 145HP
$20.00
A122 Type Air Filter as used on VC fitted with Stromberg Carburettor, as well as VE/VF 145HP NOS Ryco Made in Australia
$24.00
Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop
$74.00
Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop
$74.00
Suitable for the Rear of any 2-door VE - CL model. Not the original type but looks the part and matches the front Armrests
$74.00
To suit VE - CL. Black; other colours available on request.
$60.00
This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.
$6.50
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00
Suits all models, excluding those fitted with solid disc brakes
$43.00
Two pin type to suit all models with Points; RV1 - VH
$8.80
Good useable condition. Plastic Clamp Part only. As removed.
$5.00
$22.00
Good useable condition. As removed.
$10.00
$50.00
$18.00
Salvaged but made from much heavier gauge steel than the reproductions. Looks galvanised but is probably plated. Will clean up ok
$20.00
Salvaged. Surface rust but structurally sound.
$8.00
This is the only one we have in stock and may be the last one we ever have in stock as I believe these are no longer in production. Nice thick walled...
$75.00
To suit AP5 - CM Quality digital print
$6.50
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00
$20.00
Suits all models. Quality product made by an automotive OEM
$8.00
This is the strip that attaches to the bonnet with 6 clips (already fitted)
$66.00
For mounting to ridged bonnet
$40.00
Suits VE - CM. Quality product made by an automotive OEM. Sold individually.
$4.00
Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies
$1.00
Salvaged Boot Latch assembly. Needs cleaning up but if sandblasting, do not blast the spindle which the Lock Barrel fits into. This part is made of a...
$40.00
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00
To suit VIP
$123,456.00
This kit contains all of the clips and nuts required to fit both trim strips to the boot of a VF / VG Hardtop
$64.00
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00
Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50
$20.00
$8.00
To suit manual VE-VF models with front Disc Brakes
$12.50
This is a set of 4 Brake Shoes to do both front brakes
$45.00
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50
NOT CURRENTLY AVAILABLE Caliper Kit to rebuild one PBR DB1 caliper as found on VC - VF.
$36.00
$27.50
$50.00
2-1/8", brass. Suits all 6 cylinder models
$5.00
Later Dished Type
$9.00
To suit VE - VF with 160HP 225, VG with 245 and AP6 - VJ with 273 / 318 Quality Australian product
$121.00
To suit VE - VF with 160HP 225, VG with 245 and AP6 - VJ with 273 / 318 Quality Australian product. Genuine early Mitsubishi-branded product in...
$69.00
Clutch Pedal Rubber and Brake Pedal Rubber to suit Manual VE and VF with drum brakes all round.
$14.00
$9.00
$22.00
$22.00
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00
Suits all models
$8.00
Set of 4 Clutch Pivot Bushes
$12.00
$13.50
Restoration-correct part to suit all Manual gearbox models
$17.00
$17.00
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00
