Product Image
Item Name
Price
This includes enough strip for the top and rear vertical channel. Does not include the piece that goes into the front vertical channel as this is a...
$29.50 Add:
Quality US-made product. Includes 2 seals to do both doors
$245.00 Add:
Suits AP5 - CM. Quality rubber product made by an automotive OEM. By buying directly from the factory we have managed to cut out the middleman and...
$1.65 Add:
This will suit 1965 AP6 - VF 225
$35.00 Add:
This will suit VF - VH 318
$22.00 Add:
Full set of pads to suit PBR DB1 solid disc brake setup as used on VC - VF
$75.00 Add:
To suit all models up to early VG
$74.00 Add:
To suit VC - VK Quality digital print
$8.50 Add:
To suit all Late VC - CM
$14.50 Add:
Sold as a pair with mounting hardware
$110.00 Add:
This will suit 1965 AP6 - VF 225
$18.00 Add:
This will suit VF - VH 318
$22.00 Add:
$60.00 Add:
$74.50 Add:
This will suit VF - VH 318
$18.00 Add:
This will suit 1965 AP6 - VF, 225
$28.00 Add:
This will suit 1965 AP6 - VF, 225
$18.00 Add:
This will suit VF - VH 318
$13.20 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
$17.00 Add:
Restoration-correct part to suit all Manual gearbox models
$17.00 Add:
$13.50 Add:
Set of 4 Clutch Pivot Bushes
$12.00 Add:
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Suits all models
$8.00 Add:
$22.00 Add:
$22.00 Add:
$9.00 Add:
Clutch Pedal Rubber and Brake Pedal Rubber to suit Manual VE and VF with drum brakes all round.
$14.00 Add:
To suit VE - VF with 160HP 225, VG with 245 and AP6 - VJ with 273 / 318 Quality Australian product. Genuine early Mitsubishi-branded product in...
$69.00 Add:
To suit VE - VF with 160HP 225, VG with 245 and AP6 - VJ with 273 / 318 Quality Australian product
$121.00 Add:
Later Dished Type
$9.00 Add:
2-1/8", brass. Suits all 6 cylinder models
$5.00 Add:
$50.00 Add:
$27.50 Add:
NOT CURRENTLY AVAILABLE Caliper Kit to rebuild one PBR DB1 caliper as found on VC - VF.
$36.00 Add:
Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50 Add:
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add:
This is a set of 4 Brake Shoes to do both front brakes
$45.00 Add:
To suit manual VE-VF models with front Disc Brakes
$12.50 Add:
$8.00 Add:
$20.00 Add:
Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
This kit contains all of the clips and nuts required to fit both trim strips to the boot of a VF / VG Hardtop
$64.00 Add:
To suit VIP
$123,456.00 Add:
Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00 Add:
Salvaged Boot Latch assembly. Needs cleaning up but if sandblasting, do not blast the spindle which the Lock Barrel fits into. This part is made of a...
$40.00 Add:
Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies
$1.00 Add:
Suits VE - CM. Quality product made by an automotive OEM. Sold individually.
$4.00 Add:
For mounting to ridged bonnet
$40.00 Add:
Also known as 'Hood to Cowl Seal', this is the part that attaches to the bonnet with 6 clips (already fitted)
$50.00 Add:
Suits all models. Quality product made by an automotive OEM
$8.00 Add:
$20.00 Add:
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00 Add:
To suit AP5 - CM Quality digital print
$6.50 Add:
This is the only one we have in stock and may be the last one we ever have in stock as I believe these are no longer in production. Nice thick walled...
$75.00 Add:
Salvaged. Surface rust but structurally sound.
$8.00 Add:
Salvaged but made from much heavier gauge steel than the reproductions. Looks galvanised but is probably plated. Will clean up ok
$20.00 Add:
$18.00 Add:
$50.00 Add:
Good useable condition. As removed.
$10.00 Add:
$22.00 Add:
Good useable condition. Plastic Clamp Part only. As removed.
$5.00 Add:
Two pin type to suit all models with Points; RV1 - VH
$8.80 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00 Add:
This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.
$6.50 Add:
To suit VE - CL. Black; other colours available on request.
$60.00 Add:
Suitable for the Rear of any 2-door VE - CL model. Not the original type but looks the part and matches the front Armrests
$74.00 Add:
Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop
$74.00 Add:
Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop
$74.00 Add:
A122 Type Air Filter as used on VC fitted with Stromberg Carburettor, as well as VE/VF 145HP
$20.00 Add:
A122 Type Air Filter as used on VC fitted with Stromberg Carburettor, as well as VE/VF 145HP NOS Ryco Made in Australia
$24.00 Add:
To suit VE, VF and VG fitted with Torqueflite 727; possibly other models also
$22.00 Add:
To suit Borg Warner 35.
$5.00 Add:
To suit Borg Warner 35. NOS, no packaging
$3.50 Add:
To suit VF - VG
$80.00 Add:
To suit VE - CL Slant and Hemi engines. Includes all gaskets, seals, bearing needles, rings, clips, etc. All parts in perfect condition except cover...
$150.00 Add:
Includes all parts pictured (not sure if there should be more). Suits Slant and 273 up to VF EDIT: No longer includes springs
$16.00 Add:
NOS Speedometer Cable Shaft; use this with your original cable sheath. This is unique to all models of VF and VG; Manual Gearbox only.
$45.00 Add:
$22.00 Add:
To suit all VC - VG Manual Gearboxes
$27.00 Add:
This is the gasket that goes between the Gearbox Housing and the Gearbox Extension. Only one available.
$14.00 Add:
To suit all VC - VG Manual Gearboxes
$7.00 Add:
To suit all models of 3 Speed Manual Gearboxes from VC - CM. May also suit Centura
$15.00 Add:
To suit: VF from engine number F6P-2468 to F6P-2479 VF from engine number F6P-6225 to F6P-6338 VG, any engine number VH, any engine number VJ, any...
$100.00 Add:
$75.00 Add:
To suit: VF, VG, VH, VK and... VE with 273 from engine number VE6-2288 and up VE with 225 with 2bbl carburettor and engine number prefix of LVE8D VE...
$14.00 Add:
To suit AP5 - VG Wagon. Driver's Side only.
$28.00 Add:
$12.00 Add:
Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00 Add:
6 per car. Suits all models.
$4.50 Add:
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$50.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00 Add:
To suit VE - VF
$95.00 Add: