Home :: VG

VG

The VG is notable for being the first Valiant to feature the new Hemi engine, which was either a Very Bad Thing, or a Very Good Thing, depending on who you asked. The Hemi 245 produced 165bhp in it's basic form, up to 235bhp in an E34 or E35 optioned Pacer with a 4 barrel carburettor. The VG was the last incarnation of the body style first seen on the VE and was also noteworthy as the only model which offered a 2-door Pacer.

Displaying 101 to 200 (of 501 auto parts)

[<< Prev] 1 2 3 4 5 ... [Next >>]

Product Image	Item Name	Price
	Welch Plug, 1-7/8" 1-7/8", brass. Suits V8	$5.00 Add:
	Camshaft Plug, V8 Later Dished Type	$9.00 Add:
	Piston Set, Cast, 318, 0.020"	$400.00 Add:
	Pipe Plug, 3/8" NPT 3/8" NPT. Suits V8	$5.00 Add:
	Piston Set, Cast, 318, 0.030"	$400.00 Add:
	Pipe Plug, 1/2" NPT 1/2" NPT. Suits V8	$5.00 Add:
	Piston Set, Cast, 318, 0.040"	$400.00 Add:
	Piston Set, Cast, 318, 0.060"	$400.00 Add:
	Rear Main Seal, V8 Original Rope Type	$35.00 Add:
	Engine Mount, 318/340/360 2x required per car; each side is the same.	$31.00 Add:
	Hydraulic Lifters, V8, Salvaged Salvaged, sold individually	$8.00 Add:
	Clutch Kit, Standard, Hemi Standard Clutch Kit to suit Hemi models. Includes Clutch Plate, Pressure Plate and Thrust Race Bearing.	$250.00 Add:
	Clutch Plate Kit, Twin Plate To suit Hemi or V8 Twin Plate Clutch. Includes both inner and out plates.	$265.00 Add:
	Clutch Fork Adjuster Arm Cushion	$9.00 Add:
	Clutch Rod Washer Restoration-correct part to suit all Manual gearbox models	$17.00 Add:
	Spigot Bush Quality Australian-made sintered bronze product. Suits all manual transmissions.	$11.00 Add:
	Transmission Filter, Linkage Operated Transmission To suit all linkage-operated 904 and 727 TorqueFlite transmissions	$17.00 Add:
	Selector Seal, Post-1966 Torqueflite To suit all TorqueFlite transmissions built after 1966	$5.50 Add:
	Clutch Torque Tube Bushing Retainer Clip	$17.00 Add:
	Clutch Pivot Half Moon Bushes Set of 4 Set of 4 Clutch Pivot Bushes	$12.00 Add:
	Clutch Linkage Pivot Ball, Body Side	$22.00 Add:
	Clutch Linkage Pivot Ball, Bellhousing Side	$22.00 Add:
	Clutch Torque Tube Linkage Dust Seals Set of 2 Set of 2 MDI Clutch Torque Tube Linkage Dust Seals	$10.00 Add:
	Bellhousing Clutch Fork Dust Boot Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.	$43.00 Add:
	Clutch Pushrod Firewall Boot	$13.50 Add:
	Clutch Linkage Washer Suits all models	$8.00 Add:
	Clutch Linkage Washer 2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster	$5.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 904 Quality kit with braided sheathing	$110.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 727 Quality kit with braided sheathing	$110.00 Add:
	Flex Plate, Slant / Hemi with Torqueflite, Salvaged	$50.00 Add:
	Flex Plate, 318 / 340 with Torqueflite, Salvaged	$50.00 Add:
	Rear Extension Housing Seal Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic	$32.00 Add:
	Rear Extension Housing Seal Suits TorqueFlite 727, Borg Warner 4 Speed Manual	$27.00 Add:
	Pump / Converter Seal Suits TorqueFlite 904	$18.50 Add:
	Pump / Converter Seal Suits TorqueFlite 727	$16.00 Add:
	2538695 Torqueflite Rear Clutch Piston Seal Outer NOS To suit: VF, VG, VH, VK and... VE with 273 from engine number VE6-2288 and up VE with 225 with 2bbl carburettor and engine number prefix of LVE8D VE...	$14.00 Add:
	Transmission / Gearbox Mount To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...	$49.00 Add:
	Selector Seal O-Ring, Borg Warner 3-Speed To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models	$2.00 Add:
	Selector Seal, Borg Warner 3-Speed To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models	$18.00 Add:
	1630878 Gearbox Bearing Thrust Washer NOS 2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM	$7.00 Add:
	Gearbox Rebuild Kit A very comprehensive gearbox rebuild kit including Layshaft	$185.00 Add:
	Speedometer Cable To suit Borg Warner 35 Automatic and 3 & 4 speed Manual. Includes Firewall Grommet	$118.00 Add:
	2203351 Front Wheel Bearing Inner Bearing Cup only NOS Suits all RV1-VK front drum braked models. This is just the "Cup" component.	$10.00 Add:
	Front Wheel Bearing Kit Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models	$29.00 Add:
	2405847 Drum Brake Hub Dust Seal NOS	$12.00 Add:
	1615340 Wheel Bearing, Inner NOS VG - CM	$20.00 Add:
	Front Axle Hub Seal Front Axle Hub Seal to suit all models from VG-CM. You do not need to purchase this item if you are buying the Front Wheel Bearing Kit as it is...	$7.70 Add:
	2808269 Disc Brake Hub Dust Seal NOS	$18.00 Add:
	Front Wheel Inner Bearing	$12.00 Add:
	Front Wheel Outer Bearing	$12.00 Add:
	Front Shock Absorber Upper Bushes, Pair Genuine Mackay, Australian made. Includes inner tubes.	$80.00 Add:
	Front Shock Absorber Lower Bush Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...	$13.80 Add:
	Lower Control Arm Bush Pair Urethane Full kit that includes inner and outer metal sleeves	$84.00 Add:
	Lower Control Arm Bump Stop, Urethane Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.	$25.00 Add:
	Upper Control Arm Bump Stops, MDI, Pair Includes nuts and washers.	$30.00 Add:
	Upper Control Arm Bush, Rubber Quality Australian-made Mackay Rubber product. 4 required per car	$15.00 Add:
	Upper Control Arm Bush, Polyurethane Nolathane or Moog brand	$17.00 Add:
	Upper Control Arm Offset Bolts Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.	$40.00 Add:
	Ball Joint, Lower, Right Hand Suits all models, excluding those fitted with solid disc brakes	$43.00 Add:
	Ball Joint, Lower, Left Hand Suits all models, excluding those fitted with solid disc brakes. Wasp brand	$49.00 Add:
	Lower Ball Joint Rubber Boot An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...	$7.70 Add:
	Upper Ball Joint Suits all models except RV1.	$24.00 Add:
	Upper Ball Joint Rubber Boot If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.	$5.75 Add:
	Tie Rod End, R/H thread Suits all Valiant models except R Series For R/H outer and L/H inner	$16.50 Add:
	Tie Rod End, L/H thread Suits all Valiant models except R Series For L/H outer and R/H inner	$16.50 Add:
	Tie Rod End Rubber Boot If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer	$5.85 Add:
	Idler Arm, Small Bolt Type This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...	$44.00 Add:
	Idler Arm Bush, Small Bolt Type, Rubber This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$10.00 Add:
	Idler Arm Bush, Small Bolt Type, Nolathane This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$24.50 Add:
	Radius Rod Bushes Sold as a pair, Single Piece Type	$25.00 Add:
	Pitman Arm, Manual Steering To suit models without power steering. 5 year, 100000km warranty.	$55.00 Add:
	Pitman Arm, Power Steering To suit models with power steering. 5 year, 100000km warranty.	$55.00 Add:
	Sway Bar Links and Rubbers Suits all models	$49.00 Add:
	K-Frame Sway Bar Mounting Bracket These are the brackets used to mount the Front Sway Bar to the K-Frame	$25.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 18mm These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 20mm These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 22mm These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 23mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 24mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 25mm These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 27mm These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 30mm These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	Steering Box Lower Oil Seal Suits manual Steering Box	$35.00 Add:
	Steering Box Upper Oil Seal Suits manual Steering Box	$15.00 Add:
	Steering Coupling Repair Kit Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.	$32.00 Add:
	Lower Steering Shaft Dust Cover	$9.00 Add:
	Torsion Bar Seals Pair of MDI Seals. Suits all models	$26.00 Add:
	Disc Pad Set Full set of pads to suit VG - VH disc brakes	$29.00 Add:
	Caliper Kit Caliper Kit to rebuild one VG - VH Caliper.	$29.00 Add:
	Master Cylinder Kit, Drum/Drum	$62.00 Add:
	Master Cylinder Kit, Disc/Drum	$82.00 Add:
	Master Cylinder Fluid Sensor, Salvaged Salvaged Master Cylinder Fluid Sensor; untested but will be replaced free of charge if DOA.	$20.00 Add:
	Master Cylinder, Drum/Drum, Exchange Reconditioned Master Cylinder to suit models with drum brakes all round. Send us your old unit and get a reconditioned unit back ready to bolt in.	$245.00 Add:
	Master Cylinder, Disc/Drum, Exchange Reconditioned Master Cylinder to suit models with front disc brakes and rear drum brakes. Send us your old unit and get a reconditioned unit back...	$245.00 Add:
	Brake Shoes, Front Set This is a set of 4 Brake Shoes to do both front brakes	$45.00 Add:
	Front Brake Drum	$99.00 Add:
	Front Brake Hose for Drum Brakes Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!	$38.00 Add:
	Front Brake Hose for Disc Brakes Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!	$38.00 Add:
	Front Brake Hose Set for Disc Brakes, Braided Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front brake hoses for disc brakes. Hoses are made to your...	$110.00 Add:
	Brake Hose Full Set, Braided, Drum Brakes Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...	$165.00 Add:

Displaying 101 to 200 (of 501 auto parts)

[<< Prev] 1 2 3 4 5 ... [Next >>]