Product Image
Item Name
Price
Two pin type to suit all models with Points; RV1 - VH
$8.80 Add:
Sold as a pair, Single Piece Type
$25.00 Add:
$12.00 Add:
Hi Beam Dipper Switch to suit RV1 - VJ.
$16.50 Add:
Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00 Add:
This is a set of 4 Brake Shoes to do both front brakes
$45.00 Add:
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00 Add:
$22.00 Add:
Unbent, undamaged. Picture used is for demonstration purposes only; your item will be the same type and in good useable condition but may look...
$35.00 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High Beam Single Filament Single Beam
$22.00 Add:
5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High/Low Sealed Beam
$22.00 Add:
$68.00 Add:
Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00 Add:
Full kit that includes inner and outer metal sleeves
$84.00 Add:
Suits all Valiant models except R Series For L/H outer and R/H inner
$16.50 Add:
Suits all Valiant models except R Series For R/H outer and L/H inner
$16.50 Add:
Suits all models except RV1.
$24.00 Add:
If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.
$5.75 Add:
To suit all Late VC - CM
$14.50 Add:
Suits all models from VC to CM
$22.00 Add:
Indicator Lens as found on the front and rear of various VC-VG models. Clear. Quality Australian-made product.
$40.00 Add:
Gasket to suit Indicator Lens as found on the front and rear of various VC-VG models.
$5.50 Add:
Indicator Lens as found on the front and rear of various VC-VG models. Orange.
$35.00 Add:
Salvaged Boot Latch assembly. Needs cleaning up but if sandblasting, do not blast the spindle which the Lock Barrel fits into. This part is made of a...
$40.00 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00 Add:
Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front brake hoses for disc brakes. Hoses are made to your...
$110.00 Add:
To suit VC - VK Quality digital print
$8.50 Add:
Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop
$74.00 Add:
Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop
$74.00 Add:
Suitable for the Rear of any 2-door VE - CL model. Not the original type but looks the part and matches the front Armrests
$74.00 Add:
To suit VE - CL. Black; other colours available on request.
$60.00 Add:
To suit: VF, VG, VH, VK and... VE with 273 from engine number VE6-2288 and up VE with 225 with 2bbl carburettor and engine number prefix of LVE8D VE...
$14.00 Add:
$50.00 Add:
$18.00 Add:
Salvaged but made from much heavier gauge steel than the reproductions. Looks galvanised but is probably plated. Will clean up ok
$20.00 Add:
Salvaged. Surface rust but structurally sound.
$8.00 Add:
This is the only one we have in stock and may be the last one we ever have in stock as I believe these are no longer in production. Nice thick walled...
$75.00 Add:
Suits VE - CM. Quality product made by an automotive OEM. Sold individually.
$4.00 Add:
Sold as a pair with mounting hardware
$110.00 Add:
To suit all VE-CM. Price is for 1
$9.00 Add:
To suit all VE-CM without a heater
$20.00 Add:
To suit all VE-CM fitted with a heater
$20.00 Add:
$48.00 Add:
New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different
$48.00 Add:
New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different
$48.00 Add:
Suits TorqueFlite 727
$16.00 Add:
Suits all V8 small blocks except AP6 - VC
$4.50 Add:
Chrome Plated. Suits all V8 small blocks except AP6 - VC
$33.00 Add:
Salvaged, grubby but may polish up ok. Some pitting around neck but no leaks. Full refund if you don't reckon it's worth ten bucks
$10.00 Add:
Quality Australian-made product. Includes gasket. Suits all V8 small blocks except AP6 - VC
$30.00 Add:
Flip-top cap to suit original Washer Bottle
$12.00 Add:
One kit does both wiper arms.
$24.00 Add:
Starter Relay to suit all models from VE with an Automatic transmission
$27.50 Add:
Starter Relay to suit all models from VE with a Manual gearbox
$27.50 Add:
2x required per car; each side is the same.
$31.00 Add:
To suit models without power steering. 5 year, 100000km warranty.
$55.00 Add:
To suit models with power steering. 5 year, 100000km warranty.
$55.00 Add:
Salvaged Rear Door Quarter Window Glass, good condition with no scratches or chips.
$38.00 Add:
Salvaged Rear Door Quarter Window Glass, good condition with no scratches or chips.
$38.00 Add:
To suit cars with air-con or heater
$40.00 Add:
To suit cars without air-con or heater
$40.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$5.00 Add:
To suit VE, VF and VG Boot, Bonnet and Tailgates
$50.00 Add:
Also known as 'Hood to Cowl Seal', this is the part that attaches to the bonnet with 6 clips (already fitted)
$50.00 Add:
Each kit is enough to do 2 handles
$10.00 Add:
Salvaged Front Door Window Glass to suit to suit sedan, wagon or ute with vent window. Good condition with no scratches or chips.
$45.00 Add:
Salvaged Front Door Window Glass to suit to suit sedan, wagon or ute with vent window. Good condition with no scratches or chips.
$45.00 Add:
$35.00 Add:
Suits all VE - VG models. Sold as a set to do both guards.
$48.00 Add:
Salvaged Front Vent Window to suit VE - VG Sedan, Wagon & Ute. Good condition with no scratches or chips.
$40.00 Add:
Salvaged Front Windscreen to suit VE-VG Sedan/Ute/Wagon. Good condition with no scratches or chips. There is no way I'll be posting this but it can...
$100.00 Add:
Suits all VE-VF-VG models except Hardtop and VF-VG VIP
$85.00 Add:
This is the long one. Quality Australian-made product.
$93.50 Add:
This is the short one. Quality Australian-made product.
$84.00 Add:
If your budget doesn't stretch to new handles but you'd still prefer to get out of your car without climbing through the window, why not get a random...
$5.00 Add:
If your budget doesn't stretch to new handles but you'd still prefer to get out of your car without climbing through the window, why not get a random...
$5.00 Add:
Salvaged Rear Door Window Glass, good condition with no scratches or chips. Fits all models except VF - VG VIP
$45.00 Add:
$7.00 Add:
$39.00 Add:
$99.00 Add:
$99.00 Add:
To suit VE Wagon and VE / VF / VG Ute.
$6.25 Add:
Quality Australian-made product. Suits VE Wagon and VE / VF / VG Ute.
$92.00 Add:
Quality Australian-made product. Suits VE Wagon and VE / VF / VG Ute.
$92.00 Add:
The big plastic tube assembly between the Tank and the Fuel Cap. Suits VE, VF, VG Sedan
$50.00 Add:
The metal cover that goes over the big plastic tube assembly. Suits VE, VF, VG Sedan
$25.00 Add:
This is a salvaged item; free of any major, obvious damage. Does not include demister. Too large to post; contact us for a courier quote.
$130.00 Add:
This is a salvaged item; free of any major, obvious damage. Includes demister (untested but with no obvious broken wires). Too large to post; contact...
$130.00 Add:
If your indicator refuses to cancel after turning a corner, chances are one of the tabs has broken off. A common problem which is easily fixed with a...
$25.00 Add:
Before ordering this product, please note: you may only need the Cancelling Cam, which is much cheaper! If you are having an issue such as the...
$122.00 Add:
Salvaged Master Cylinder Fluid Sensor; untested but will be replaced free of charge if DOA.
$20.00 Add:
$82.00 Add:
$62.00 Add: