Product Image
Item Name
Price
$13.20 Add:
To suit all V8 models (318/340/360) from VF - CM without Air Conditioning or Power Steering
$13.00 Add:
To suit all V8 models (318/340/360) from VF - CM with Air Conditioning. Note that two belts are required per car.
$14.50 Add:
Power Steering Belt to suit all V8 models (318/340/360) from VF - CM with Power Steering.
$11.00 Add:
Suits 273 and 318
$6.00 Add:
Includes gasket.
$85.00 Add:
Includes gasket. May be used on 273 engines when using 318 Alloy Timing Case.
$100.00 Add:
We have recently come across a number of original V8 Water Pumps which have been rebuilt to high volume specifications (ie; 8 blades) decades ago by...
$175.00 Add:
Includes gasket. May be used on 273 engines when using 318 Alloy Timing Case.
$150.00 Add:
Clevite brand
$80.00 Add:
Adjustable, Tru-Roller type.
$110.00 Add:
$60.00 Add:
$50.00 Add:
Suits all V8 models. Includes: 1 x 1-1/4", 9 x 1-5/8" and 1 x 1-7/8" brass cup welch plugs, 1 x 3/8" NPT Pipe Plug, and 1 x 1/2" NPT Pipe Plug
$49.50 Add:
1-1/4", brass. Suits V8
$5.00 Add:
1-7/8", brass. Suits V8
$5.00 Add:
Later Dished Type
$9.00 Add:
$400.00 Add:
3/8" NPT. Suits V8
$5.00 Add:
$400.00 Add:
1/2" NPT. Suits V8
$5.00 Add:
$400.00 Add:
$400.00 Add:
Original Rope Type
$35.00 Add:
2x required per car; each side is the same.
$31.00 Add:
Salvaged, sold individually
$8.00 Add:
Standard Clutch Kit to suit Hemi models. Includes Clutch Plate, Pressure Plate and Thrust Race Bearing.
$250.00 Add:
To suit Hemi or V8 Twin Plate Clutch. Includes both inner and out plates.
$265.00 Add:
$9.00 Add:
Restoration-correct part to suit all Manual gearbox models
$17.00 Add:
Quality Australian-made sintered bronze product. Suits all manual transmissions.
$11.00 Add:
To suit all linkage-operated 904 and 727 TorqueFlite transmissions
$17.00 Add:
To suit all TorqueFlite transmissions built after 1966
$5.50 Add:
To suit all Borg Warner Automatic Transmissions
$7.00 Add:
$17.00 Add:
Set of 4 Clutch Pivot Bushes
$12.00 Add:
$22.00 Add:
$22.00 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00 Add:
$13.50 Add:
Suits all models
$8.00 Add:
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Quality kit with braided sheathing
$110.00 Add:
$50.00 Add:
$50.00 Add:
6 per car. Suits all models.
$4.50 Add:
Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic
$32.00 Add:
Suits TorqueFlite 904
$18.50 Add:
Suits TorqueFlite 727
$16.00 Add:
Suits Borg-Warner 35
$16.00 Add:
To suit: VF, VG, VH, VK and... VE with 273 from engine number VE6-2288 and up VE with 225 with 2bbl carburettor and engine number prefix of LVE8D VE...
$14.00 Add:
To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...
$49.00 Add:
$8.00 Add:
To suit Borg Warner 3 Speed Manual Gearboxes for AP5 - early VF and as a Rear Selector Seal for Borg Warner 4 Speed Manual Gearboxes
$6.00 Add:
To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models
$2.00 Add:
To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models
$18.00 Add:
To suit Borg Warner 4 Speed Manual Gearboxes
$2.00 Add:
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00 Add:
To suit all models of 3 Speed Manual Gearboxes from VC - CM. May also suit Centura
$15.00 Add:
To suit VE - CL Slant and Hemi engines. Includes all gaskets, seals, bearing needles, rings, clips, etc. All parts in perfect condition except cover...
$150.00 Add:
A very comprehensive gearbox rebuild kit including Layshaft
$185.00 Add:
To suit Borg Warner 35 Automatic and 3 & 4 speed Manual. Includes Firewall Grommet
$118.00 Add:
Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00 Add:
$12.00 Add:
VG - CM
$20.00 Add:
Front Axle Hub Seal to suit all models from VG-CM. You do not need to purchase this item if you are buying the Front Wheel Bearing Kit as it is...
$7.70 Add:
$18.00 Add:
$12.00 Add:
$12.00 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
Full kit that includes inner and outer metal sleeves
$84.00 Add:
Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00 Add:
Includes nuts and washers.
$30.00 Add:
Quality Australian-made Mackay Rubber product. 4 required per car
$15.00 Add:
Nolathane or Moog brand
$17.00 Add:
Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.
$40.00 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00 Add:
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70 Add:
Suits all models except RV1.
$24.00 Add:
If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.
$5.75 Add:
Suits all Valiant models except R Series For R/H outer and L/H inner
$16.50 Add:
Suits all Valiant models except R Series For L/H outer and R/H inner
$16.50 Add:
If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer
$5.85 Add:
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50 Add:
Sold as a pair, Single Piece Type
$25.00 Add:
To suit models without power steering. 5 year, 100000km warranty.
$55.00 Add:
To suit models with power steering. 5 year, 100000km warranty.
$55.00 Add:
Suits all models
$49.00 Add:
These are the brackets used to mount the Front Sway Bar to the K-Frame
$25.00 Add:
These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add: