VH

The VH range was the first fully Australian designed Valiant and was very well-received. The 245ci Hemi was joined by a 215ci in the base model Ranger and 265ci version which produced 218bhp when it was in the new 4 door Pacer. In fact, the VH Pacer held the record for the fastest mass-produced Australian 6 cylinder 4 door sedan for 17 years. The new Charger range included the iconic Six Pack models which included triple side-draught Weber 2 barrel carburettors resulting in up to 302bhp with the E49 option. The E55 option included a 275bhp 340ci V8 which could push the Charger 770 SE to 196km/h. Also released at the same time was the remarkably unimaginatively-named luxury Chrysler by Chrysler or CH series. The CH was available as a 2 or 4 door and was 4 inches longer than the standard sedan. 67800 VHs were built before production ended in early 1973.



Product Image Item Name Price
Battery Tray

Battery Tray

$50.00

Add:

Battery Tray Brace

Battery Tray Brace

$18.00

Add:

Battery Tray Brace, heavy gauge, salvaged

Battery Tray Brace, heavy gauge, salvaged

Salvaged but made from much heavier gauge steel than the reproductions. Looks galvanised but is probably plated. Will clean up ok
$20.00

Add:

Battery Tray Brace, salvaged

Battery Tray Brace, salvaged

Salvaged. Surface rust but structurally sound.
$8.00

Add:

Battery Tray, Fibreglass

Battery Tray, Fibreglass

This is the only one we have in stock and may be the last one we ever have in stock as I believe these are no longer in production. Nice thick walled...
$75.00

Add:

Bonnet Side Rubber

Bonnet Side Rubber

Suits VE - CM. Quality product made by an automotive OEM. Sold individually.
$4.00

Add:

Dash Vents

Dash Vents

Sold as a pair with mounting hardware
$110.00

Add:

Firewall / Plenum Plug

Firewall / Plenum Plug

To suit all VE-CM. Price is for 1
$9.00

Add:

Heater Hose and Wiring Blanking Grommet

Heater Hose and Wiring Blanking Grommet

To suit all VE-CM without a heater
$20.00

Add:

Heater Hose and Wiring Grommet

Heater Hose and Wiring Grommet

To suit all VE-CM fitted with a heater
$20.00

Add:

Hood to Cowl Seal

Hood to Cowl Seal

$48.00

Add:

Interior Door Handle, Left

Interior Door Handle, Left

New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different
$48.00

Add:

Interior Door Handle, Right

Interior Door Handle, Right

New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different
$48.00

Add:

Pump / Converter Seal

Pump / Converter Seal

Suits TorqueFlite 727
$16.00

Add:

Thermostat Gasket, V8

Thermostat Gasket, V8

Suits all V8 small blocks except AP6 - VC
$4.50

Add:

Thermostat Housing, Chrome Plated, V8

Thermostat Housing, Chrome Plated, V8

Chrome Plated. Suits all V8 small blocks except AP6 - VC
$33.00

Add:

Thermostat Housing, Chrome Plated, V8, salvaged

Thermostat Housing, Chrome Plated, V8, salvaged

Salvaged, grubby but may polish up ok. Some pitting around neck but no leaks. Full refund if you don't reckon it's worth ten bucks
$10.00

Add:

Thermostat Housing, V8

Thermostat Housing, V8

Quality Australian-made product. Includes gasket. Suits all V8 small blocks except AP6 - VC
$30.00

Add:

Windscreen Washer Bottle Cap, Black

Windscreen Washer Bottle Cap, Black

Flip-top cap to suit original Washer Bottle
$12.00

Add:

Wiper Pivot Seal Kit

Wiper Pivot Seal Kit

One kit does both wiper arms.
$24.00

Add:

Armrest Base, Front or Rear, Chrome, Driver's Side

Armrest Base, Front or Rear, Chrome, Driver's Side

Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop
$74.00

Add:

Armrest Base, Front or Rear, Chrome, Passenger Side

Armrest Base, Front or Rear, Chrome, Passenger Side

Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop
$74.00

Add:

Armrest Base, Rear, Chrome, Charger/Hardtop/Coupe only

Armrest Base, Rear, Chrome, Charger/Hardtop/Coupe only

Suitable for the Rear of any 2-door VE - CL model. Not the original type but looks the part and matches the front Armrests
$74.00

Add:

Armrest Pad, Black with Stitching

Armrest Pad, Black with Stitching

To suit VE - CL. Black; other colours available on request.
$60.00

Add:

Diff ID Tag Decal

Diff ID Tag Decal

To suit VC - VK Quality digital print
$8.50

Add:

Front Brake Hose for Disc Brakes

Front Brake Hose for Disc Brakes

Top quality hose, made in Australia and individually tested to 3000psi. Now selling for $14 cheaper than it was 10 years ago!
$38.00

Add:

Front Brake Hose Set for Disc Brakes, Braided

Front Brake Hose Set for Disc Brakes, Braided

Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front brake hoses for disc brakes. Hoses are made to your...
$110.00

Add:

Brake Hose Full Set, Braided, Disc Brakes

Brake Hose Full Set, Braided, Disc Brakes

Top quality hoses, made in Australia and individually tested to 3000psi. Includes both front hoses and the rear hose. Hoses are made to your order:...
$165.00

Add:

2792682 Rear Inner Gearbox Thrust Washer NOS

2792682 Rear Inner Gearbox Thrust Washer NOS

To suit all models of 3 Speed Manual Gearboxes from VC - CM. May also suit Centura
$15.00

Add:

Diff Cover Plate Gasket

Diff Cover Plate Gasket

To suit all Late VC - CM
$14.50

Add:

Water Temperature Sender

Water Temperature Sender

Suits all models from VC to CM
$22.00

Add:

Lower Control Arm Bump Stop, Urethane

Lower Control Arm Bump Stop, Urethane

Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00

Add:

Lower Control Arm Bush Pair Urethane

Lower Control Arm Bush Pair Urethane

Full kit that includes inner and outer metal sleeves
$84.00

Add:

Tie Rod End, L/H thread

Tie Rod End, L/H thread

Suits all Valiant models except R Series For L/H outer and R/H inner
$16.50

Add:

Tie Rod End, R/H thread

Tie Rod End, R/H thread

Suits all Valiant models except R Series For R/H outer and L/H inner
$16.50

Add:

Upper Ball Joint

Upper Ball Joint

Suits all models except RV1.
$24.00

Add:

Upper Ball Joint Rubber Boot

Upper Ball Joint Rubber Boot

If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.
$5.75

Add:

Rear Shackle Assembly NOS

Rear Shackle Assembly NOS

$68.00

Add:

Headlight, High Beam 5-3/4"

Headlight, High Beam 5-3/4"

5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High Beam Single Filament Single Beam
$22.00

Add:

Headlight, High/Low Beam 5-3/4"

Headlight, High/Low Beam 5-3/4"

5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High/Low Sealed Beam
$22.00

Add:

2203351 Front Wheel Bearing Inner Bearing Cup only NOS

2203351 Front Wheel Bearing Inner Bearing Cup only NOS

Suits all RV1-VK front drum braked models. This is just the "Cup" component.
$10.00

Add:

Brake Shoes, Front Set

Brake Shoes, Front Set

This is a set of 4 Brake Shoes to do both front brakes
$45.00

Add:

Brake Spring and Clip Set

Brake Spring and Clip Set

To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00

Add:

Front Wheel Bearing Kit

Front Wheel Bearing Kit

Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models
$29.00

Add:

Rear Wheel Cylinder

Rear Wheel Cylinder

$22.00

Add:

Standard 225 and 215 Fan, Salvaged

Standard 225 and 215 Fan, Salvaged

Unbent, undamaged. Picture used is for demonstration purposes only; your item will be the same type and in good useable condition but may look...
$35.00

Add:

2405847 Drum Brake Hub Dust Seal NOS

2405847 Drum Brake Hub Dust Seal NOS

$12.00

Add:

High Beam Dipper Switch

High Beam Dipper Switch

Hi Beam Dipper Switch to suit RV1 - VJ.
$16.50

Add:

Ballast Resistor

Ballast Resistor

Two pin type to suit all models with Points; RV1 - VH
$8.80

Add:

Radius Rod Bushes

Radius Rod Bushes

Sold as a pair, Single Piece Type
$25.00

Add:

Exhaust Flange Gasket, 225, NOS

Exhaust Flange Gasket, 225, NOS

Copper-faced gasket, old stock, brand unknown
$11.00

Add:

Air Filter

Air Filter

A50 Type Air Filter as used on all 225 RV1 - VC as well as most VH - VJ 215 and 245 with 1BBL Carter Carburettor
$24.50

Add:

Idler Arm Bush, Small Bolt Type, Nolathane

Idler Arm Bush, Small Bolt Type, Nolathane

This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50

Add:

Idler Arm Bush, Small Bolt Type, Rubber

Idler Arm Bush, Small Bolt Type, Rubber

This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00

Add:

Idler Arm, Small Bolt Type

Idler Arm, Small Bolt Type

This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00

Add:

Flex Plate, Slant / Hemi with Torqueflite, Salvaged

Flex Plate, Slant / Hemi with Torqueflite, Salvaged

$50.00

Add:

Ball Joint, Lower, Left Hand

Ball Joint, Lower, Left Hand

Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00

Add:

Ball Joint, Lower, Right Hand

Ball Joint, Lower, Right Hand

Suits all models, excluding those fitted with solid disc brakes
$43.00

Add:

Lower Ball Joint Rubber Boot

Lower Ball Joint Rubber Boot

An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70

Add:

1630878 Gearbox Bearing Thrust Washer NOS

1630878 Gearbox Bearing Thrust Washer NOS

2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00

Add:

1949424 Flex Plate to Crankshaft Bolts NOS

1949424 Flex Plate to Crankshaft Bolts NOS

6 per car. Suits all models.
$4.50

Add:

Armrest Retainer

Armrest Retainer

This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.
$6.50

Add:

Bellhousing Clutch Fork Dust Boot

Bellhousing Clutch Fork Dust Boot

Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00

Add:

Bonnet Bump Stop Assemblies, Pair

Bonnet Bump Stop Assemblies, Pair

$20.00

Add:

Bonnet Bump Stops, Pair

Bonnet Bump Stops, Pair

Suits all models. Quality product made by an automotive OEM
$8.00

Add:

Boot / Unerbonnet Bulb

Boot / Unerbonnet Bulb

Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies
$1.00

Add:

Boot Lock Assembly

Boot Lock Assembly

Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models
$32.00

Add:

Brake Light Switch

Brake Light Switch

Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...
$16.50

Add:

Bumper Bar Bolt

Bumper Bar Bolt

Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut
$4.50

Add:

Camshaft Plug, Slant and Hemi

Camshaft Plug, Slant and Hemi

2-1/8", brass. Suits all 6 cylinder models
$5.00

Add:

Clutch Fork Adjuster Arm Cushion

Clutch Fork Adjuster Arm Cushion

$9.00

Add:

Clutch Linkage Pivot Ball, Bellhousing Side

Clutch Linkage Pivot Ball, Bellhousing Side

$22.00

Add:

Clutch Linkage Pivot Ball, Body Side

Clutch Linkage Pivot Ball, Body Side

$22.00

Add:

Clutch Linkage Washer

Clutch Linkage Washer

2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00

Add:

Clutch Linkage Washer

Clutch Linkage Washer

Suits all models
$8.00

Add:

Clutch Pivot Half Moon Bushes Set of 4

Clutch Pivot Half Moon Bushes Set of 4

Set of 4 Clutch Pivot Bushes
$12.00

Add:

Clutch Pushrod Firewall Boot

Clutch Pushrod Firewall Boot

$13.50

Add:

Clutch Rod Washer

Clutch Rod Washer

Restoration-correct part to suit all Manual gearbox models
$17.00

Add:

Clutch Torque Tube Bushing Retainer Clip

Clutch Torque Tube Bushing Retainer Clip

$17.00

Add:

Clutch Torque Tube Linkage Dust Seals Set of 2

Clutch Torque Tube Linkage Dust Seals Set of 2

Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00

Add:

Double Filament Indicator Bulb

Double Filament Indicator Bulb

To suit Tail Light / Brake Light and Park Light / Indicator Applications
$1.00

Add:

Exhaust Hanger, Heavy Duty

Exhaust Hanger, Heavy Duty

Heavier grade than the original. Old stock.
$20.00

Add:

Exhaust Hanger, Standard

Exhaust Hanger, Standard

Standard generic model
$15.00

Add:

Exhaust Pipe Clamp, 1.5", shelf wear discount

Exhaust Pipe Clamp, 1.5", shelf wear discount

New but looks old as it has been bouncing around the shed for a while
$3.00

Add:

Fan Spacer 2-3/16"

Fan Spacer 2-3/16"

55.6mm Fits all models
$10.00

Add:

Front Shock Absorber Lower Bush

Front Shock Absorber Lower Bush

Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80

Add:

Front Shock Absorber Upper Bushes, Pair

Front Shock Absorber Upper Bushes, Pair

Genuine Mackay, Australian made. Includes inner tubes.
$80.00

Add:

Fuel Filler to Body Gasket

Fuel Filler to Body Gasket

$4.00

Add:

Fuel Pump Gasket

Fuel Pump Gasket

Suits all models
$2.20

Add:

Fuel Pump Rebuild Kit, Slant or Hemi with Carter Fuel Pump

Fuel Pump Rebuild Kit, Slant or Hemi with Carter Fuel Pump

Suits RV1 - CM Slant or Hemi with original Carter Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant...
$109.00

Add:

Fuel Sender Ground Strap, Salvaged

Fuel Sender Ground Strap, Salvaged

Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up
$2.00

Add:

Fuel Sender Ground Strap, Spring Steel

Fuel Sender Ground Strap, Spring Steel

Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.
$15.00

Add:

Fuel Sender Ground Strap, Stainless Steel

Fuel Sender Ground Strap, Stainless Steel

Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...
$22.00

Add:

Fuel Tank Sender Pickup Filter, 3/8"

Fuel Tank Sender Pickup Filter, 3/8"

To suit only models with fuel sender pickups that have been enlarged to 3/8"
$25.00

Add:

Fuel Tank Sender Pickup Filter, Standard

Fuel Tank Sender Pickup Filter, Standard

To suit all models with standard 5/16" sender tube
$33.00

Add:

Fuel Tank Sender Seal

Fuel Tank Sender Seal

Suits all models
$9.00

Add:

Fuel Tank Strap J-Bolt

Fuel Tank Strap J-Bolt

Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...
$22.00

Add:

Handbrake Cable Bracket Retainer Clip

Handbrake Cable Bracket Retainer Clip

$0.50

Add:

Horn Relay

Horn Relay

Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM
$28.00

Add:

Ignition Coil, Bosch GT40R

Ignition Coil, Bosch GT40R

For use with Ballast Resistor
$58.00

Add: