Product Image
Item Name
Price
Hi Beam Dipper Switch to suit RV1 - VJ.
$16.50 Add:
$48.00 Add:
Horn Button, salvaged. Removed many years ago so plenty of life left in them yet. Guaranteed to work.
$48.00 Add:
Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM
$28.00 Add:
$99.00 Add:
Salvaged, sold individually
$8.00 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$24.50 Add:
This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...
$10.00 Add:
This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...
$44.00 Add:
For use with Ballast Resistor
$58.00 Add:
For use with Ballast Resistor only. Made in Japan
$39.00 Add:
If your indicator refuses to cancel after turning a corner, chances are one of the tabs has broken off. A common problem which is easily fixed with a...
$25.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$14.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.
$20.00 Add:
If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...
$20.00 Add:
A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....
$7.00 Add:
Before ordering this product, please note: you may only need the Cancelling Cam, which is much cheaper! If you are having an issue such as the...
$110.00 Add:
Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs
$1.00 Add:
Standard bulb as used in all dashboard applications requiring push-in wedge type bulbs. Note dashboards may also include other bulb types.
$1.00 Add:
$22.00 Add:
New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different
$48.00 Add:
Since the frosted type of handle isn't reproduced, your only option to get the correct type is to find some decent salvaged ones. As a bit of a...
$20.00 Add:
To suit Chrysler by Chrysler and upmarket CL/CM. Some pitting in the chrome but at least they are the correct type.
$18.00 Add:
New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different
$48.00 Add:
Since the frosted type of handle isn't reproduced, your only option to get the correct type is to find some decent salvaged ones. As a bit of a...
$20.00 Add:
To suit Chrysler by Chrysler and upmarket CL/CM. Some pitting in the chrome but at least they are the correct type.
$18.00 Add:
$10.50 Add:
$1.00 Add:
Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up
$1.75 Add:
These are the brackets used to mount the Front Sway Bar to the K-Frame
$25.00 Add:
These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Suits all models from AP5 to CM except VF/VG Hardtop. Sold individually.
$19.50 Add:
Suits VF - VG Hardtop
$9.00 Add:
Suits VF - VG Hardtop
$9.00 Add:
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70 Add:
Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00 Add:
Full kit that includes inner and outer metal sleeves
$84.00 Add:
$9.00 Add:
To suit VH - CL Ute
$49.00 Add:
To suit VH - CM Wagon
$80.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
$72.00 Add:
Clevite brand
$80.00 Add:
$85.00 Add:
To suit 215, 245, 265
$18.00 Add:
Suits all Slant and Hemi engines
$4.50 Add:
These original salvaged conical washers are to suit Slant and V8 engines.
$5.00 Add:
Unavailable as a factory-correct reproduction, these original salvaged washers feature the concave shape. Suitable for both Slant and Hemi
$5.00 Add:
New item; although we will exchange your old unit if you wish; call us!
$210.00 Add:
$40.00 Add:
$180.00 Add:
This will fit all Torqueflite transmissions from VF to CM
$40.00 Add:
This will fit all Torqueflite transmissions from VF to CM. It can be used to replace the earlier one pin type, which is no longer available, with...
$55.00 Add:
This will fit all Torqueflite transmissions from VF to CM
$74.00 Add:
NOS Wibroc Mirror Head, still in the box as pictured. Stainless is perfect since it still has the protective covering on it. Mirror has no foxing....
$50.00 Add:
Standard bulb as used in all number plate light assemblies
$1.00 Add:
Quality Ryco Z9
$12.00 Add:
$19.00 Add:
Australian Made, just pulled out of long term storage
$26.00 Add:
Suits all models
$16.50 Add:
Salvaged Oil Pump Drive Gear to suit Small Block
$50.00 Add:
No longer available
$180.00 Add:
1/2" NPT. Suits V8
$5.00 Add:
3/8" NPT. Suits V8
$5.00 Add:
$72.00... more info
$72.00... more info
Hemtec Brand
$450.00 Add:
$400.00 Add:
$400.00 Add:
$400.00 Add:
$400.00 Add:
$400.00 Add:
$400.00 Add:
$400.00 Add:
$400.00 Add:
$600.00 Add:
To suit models without power steering. 5 year, 100000km warranty.
$55.00 Add:
To suit models with power steering. 5 year, 100000km warranty.
$55.00 Add:
Suits TorqueFlite 904
$18.50 Add:
Suits Borg-Warner 35
$16.00 Add:
Suits TorqueFlite 727
$16.00 Add:
$13.20 Add:
$11.00 Add:
$28.90 Add:
To suit all VG-VK Hemi models with 19" Radiator
$16.50 Add:
To suit all VG-VK Hemi models with 22" Radiator
$16.50 Add:
To suit all VG - VK Hemi models with 19" Radiator
$18.00 Add: