Log In

Home :: VJ

VJ

Although the VJ was a facelifted version of the VH, there were important changes, the most notable of which were electronic ignition, floor-mounted shifters, and, before production ended, retractable seatbelts and front disk brakes. Although the Pacer and Charger R/T were dropped, performance engine options were available across the range, although the E55 option was only available on the Charger 770. The 2 door Chrysler by Chrysler was dropped, however the 2 door Valiant hardtop was still available. The VJ range was Chrysler's most successful model with 90865 vehicles sold.

Displaying 201 to 300 (of 462 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]

Product Image	Item Name	Price
	Neutral Safety Switch Harness, Torqueflite 3-pin This will fit all Torqueflite transmissions from VF to CM	$40.00 Add:
	Neutral Safety Switch, Torqueflite 3-pin This will fit all Torqueflite transmissions from VF to CM	$74.00 Add:
	Piston Set, Cast, 318, 0.020"	$400.00 Add:
	Piston Set, Cast, 318, 0.030"	$400.00 Add:
	Piston Set, Cast, 318, 0.040"	$400.00 Add:
	Piston Set, Cast, 318, 0.060"	$400.00 Add:
	Sunvisor Tips, Pair Sold as a pair. Reproduction of original factory item	$9.00 Add:
	Universal Joint, Sure-Grip To suit Valiant models with Sure-Grip Limited Slip Diffs	$44.00 Add:
	Use Chrysler Parts Decal To suit Late VE - VK Quality Digital Print	$14.00 Add:
	3714712 Gearbox Repair Package NOS To suit VE - CL Slant and Hemi engines. Includes all gaskets, seals, bearing needles, rings, clips, etc. All parts in perfect condition except cover...	$150.00 Add:
	Gearbox Rebuild Kit A very comprehensive gearbox rebuild kit including Layshaft	$185.00 Add:
	Pitman Arm, Power Steering To suit models with power steering. 5 year, 100000km warranty.	$55.00 Add:
	Pitman Arm, Manual Steering To suit models without power steering. 5 year, 100000km warranty.	$55.00 Add:
	Engine Mount, 318/340/360 2x required per car; each side is the same.	$31.00 Add:
	Starter Relay, Manual Starter Relay to suit all models from VE with a Manual gearbox	$27.50 Add:
	Starter Relay, Automatic Starter Relay to suit all models from VE with an Automatic transmission	$27.50 Add:
	2538695 Torqueflite Rear Clutch Piston Seal Outer NOS To suit: VF, VG, VH, VK and... VE with 273 from engine number VE6-2288 and up VE with 225 with 2bbl carburettor and engine number prefix of LVE8D VE...	$14.00 Add:
	Battery Tray	$50.00 Add:
	Battery Tray Brace	$18.00 Add:
	Battery Tray Brace, heavy gauge, salvaged Salvaged but made from much heavier gauge steel than the reproductions. Looks galvanised but is probably plated. Will clean up ok	$20.00 Add:
	Battery Tray Brace, salvaged Salvaged. Surface rust but structurally sound.	$8.00 Add:
	Battery Tray, Fibreglass This is the only one we have in stock and may be the last one we ever have in stock as I believe these are no longer in production. Nice thick walled...	$75.00 Add:
	Bonnet Side Rubber Suits VE - CM. Quality product made by an automotive OEM. Sold individually.	$4.00 Add:
	Dash Vents Sold as a pair with mounting hardware	$110.00 Add:
	Firewall / Plenum Plug To suit all VE-CM. Price is for 1	$9.00 Add:
	Heater Hose and Wiring Blanking Grommet To suit all VE-CM without a heater	$20.00 Add:
	Heater Hose and Wiring Grommet To suit all VE-CM fitted with a heater	$20.00 Add:
	Hood to Cowl Seal	$48.00 Add:
	Interior Door Handle, Left New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different	$48.00 Add:
	Interior Door Handle, Right New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different	$48.00 Add:
	Pump / Converter Seal Suits TorqueFlite 727	$16.00 Add:
	Thermostat Gasket, V8 Suits all V8 small blocks except AP6 - VC	$4.50 Add:
	Thermostat Housing, Chrome Plated, V8 Chrome Plated. Suits all V8 small blocks except AP6 - VC	$33.00 Add:
	Thermostat Housing, Chrome Plated, V8, salvaged Salvaged, grubby but may polish up ok. Some pitting around neck but no leaks. Full refund if you don't reckon it's worth ten bucks	$10.00 Add:
	Thermostat Housing, V8 Quality Australian-made product. Includes gasket. Suits all V8 small blocks except AP6 - VC	$30.00 Add:
	Windscreen Washer Bottle Cap, Black Flip-top cap to suit original Washer Bottle	$12.00 Add:
	Wiper Pivot Seal Kit One kit does both wiper arms.	$24.00 Add:
	Armrest Base, Front or Rear, Chrome, Driver's Side Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop	$74.00 Add:
	Armrest Base, Front or Rear, Chrome, Passenger Side Suitable for the Front of any VE - CL model, and the rear of any VE - CL except VF/VG Hardtop	$74.00 Add:
	Armrest Base, Rear, Chrome, Charger/Hardtop/Coupe only Suitable for the Rear of any 2-door VE - CL model. Not the original type but looks the part and matches the front Armrests	$74.00 Add:
	Armrest Pad, Black with Stitching To suit VE - CL. Black; other colours available on request.	$60.00 Add:
	Diff ID Tag Decal To suit VC - VK Quality digital print	$8.50 Add:
	2792682 Rear Inner Gearbox Thrust Washer NOS To suit all models of 3 Speed Manual Gearboxes from VC - CM. May also suit Centura	$15.00 Add:
	Water Temperature Sender Suits all models from VC to CM	$22.00 Add:
	Lower Control Arm Bump Stop, Urethane Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.	$25.00 Add:
	Lower Control Arm Bush Pair Urethane Full kit that includes inner and outer metal sleeves	$84.00 Add:
	Tie Rod End, L/H thread Suits all Valiant models except R Series For L/H outer and R/H inner	$16.50 Add:
	Tie Rod End, R/H thread Suits all Valiant models except R Series For R/H outer and L/H inner	$16.50 Add:
	Upper Ball Joint Suits all models except RV1.	$24.00 Add:
	Upper Ball Joint Rubber Boot If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.	$5.75 Add:
	Headlight, High Beam 5-3/4" 5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High Beam Single Filament Single Beam	$22.00 Add:
	Headlight, High/Low Beam 5-3/4" 5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High/Low Sealed Beam	$22.00 Add:
	2203351 Front Wheel Bearing Inner Bearing Cup only NOS Suits all RV1-VK front drum braked models. This is just the "Cup" component.	$10.00 Add:
	Brake Shoes, Front Set This is a set of 4 Brake Shoes to do both front brakes	$45.00 Add:
	Brake Spring and Clip Set To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes	$36.00 Add:
	Front Wheel Bearing Kit Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all RV1-VK front drum braked models	$29.00 Add:
	Rear Wheel Cylinder	$22.00 Add:
	Standard 225 and 215 Fan, Salvaged Unbent, undamaged. Picture used is for demonstration purposes only; your item will be the same type and in good useable condition but may look...	$35.00 Add:
	2405847 Drum Brake Hub Dust Seal NOS	$12.00 Add:
	High Beam Dipper Switch Hi Beam Dipper Switch to suit RV1 - VJ.	$16.50 Add:
	Exhaust Flange Gasket, 225, NOS Copper-faced gasket, old stock, brand unknown	$11.00 Add:
	Air Filter A50 Type Air Filter as used on all 225 RV1 - VC as well as most VH - VJ 215 and 245 with 1BBL Carter Carburettor	$24.50 Add:
	Idler Arm Bush, Small Bolt Type, Nolathane This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$24.50 Add:
	Idler Arm Bush, Small Bolt Type, Rubber This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$10.00 Add:
	Idler Arm, Small Bolt Type This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...	$44.00 Add:
	Flex Plate, Slant / Hemi with Torqueflite, Salvaged	$50.00 Add:
	Ball Joint, Lower, Left Hand Suits all models, excluding those fitted with solid disc brakes. Wasp brand	$49.00 Add:
	Ball Joint, Lower, Right Hand Suits all models, excluding those fitted with solid disc brakes	$43.00 Add:
	Lower Ball Joint Rubber Boot An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...	$7.70 Add:
	1630878 Gearbox Bearing Thrust Washer NOS 2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM	$7.00 Add:
	1949424 Flex Plate to Crankshaft Bolts NOS 6 per car. Suits all models.	$4.50 Add:
	Armrest Retainer This is the part that fits into the slot in the door to screw the Armrest to. Sold individually.	$6.50 Add:
	Bellhousing Clutch Fork Dust Boot Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.	$43.00 Add:
	Bonnet Bump Stop Assemblies, Pair	$20.00 Add:
	Bonnet Bump Stops, Pair Suits all models. Quality product made by an automotive OEM	$8.00 Add:
	Boot / Unerbonnet Bulb Standard single filament bulb as used in many factory or aftermarket boot or underbonnet lamp assemblies	$1.00 Add:
	Boot Lock Assembly Includes key, barrel, clip, and the lever that fits into the latching mechanism. Different length levers are included to suit all models	$32.00 Add:
	Brake Light Switch Suitable for use on all models without modification except RV1/SV1. RV1/SV1 owners will need to replace the plug-type connector on the harness with a...	$16.50 Add:
	Bumper Bar Bolt Polished by hand in the USA and individually bagged to prevent scratching. Includes nyloc nut	$4.50 Add:
	Camshaft Plug, Slant and Hemi 2-1/8", brass. Suits all 6 cylinder models	$5.00 Add:
	Clutch Fork Adjuster Arm Cushion	$9.00 Add:
	Clutch Linkage Pivot Ball, Bellhousing Side	$22.00 Add:
	Clutch Linkage Pivot Ball, Body Side	$22.00 Add:
	Clutch Linkage Washer 2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster	$5.00 Add:
	Clutch Linkage Washer Suits all models	$8.00 Add:
	Clutch Pivot Half Moon Bushes Set of 4 Set of 4 Clutch Pivot Bushes	$12.00 Add:
	Clutch Pushrod Firewall Boot	$13.50 Add:
	Clutch Rod Washer Restoration-correct part to suit all Manual gearbox models	$17.00 Add:
	Clutch Torque Tube Bushing Retainer Clip	$17.00 Add:
	Clutch Torque Tube Linkage Dust Seals Set of 2 Set of 2 MDI Clutch Torque Tube Linkage Dust Seals	$10.00 Add:
	Double Filament Indicator Bulb To suit Tail Light / Brake Light and Park Light / Indicator Applications	$1.00 Add:
	Exhaust Hanger, Heavy Duty Heavier grade than the original. Old stock.	$20.00 Add:
	Exhaust Hanger, Standard Standard generic model	$15.00 Add:
	Exhaust Pipe Clamp, 1.5", shelf wear discount New but looks old as it has been bouncing around the shed for a while	$3.00 Add:
	Fan Spacer 2-3/16" 55.6mm Fits all models	$10.00 Add:
	Front Shock Absorber Lower Bush Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...	$13.80 Add:
	Front Shock Absorber Upper Bushes, Pair Genuine Mackay, Australian made. Includes inner tubes.	$80.00 Add:
	Fuel Filler to Body Gasket	$4.00 Add:
	Fuel Pump Gasket Suits all models	$2.20 Add:
	Fuel Pump Rebuild Kit, Slant or Hemi with Carter Fuel Pump Suits RV1 - CM Slant or Hemi with original Carter Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant...	$109.00 Add:

Displaying 201 to 300 (of 462 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]