Log In

Home :: VK

VK

The VK range was released in October 1975 and featured the almost the same engines and minor cosmetic updates of the successful VJ range. Carpet was now standard across the range and the Valiant Charger was now called the Chrysler Charger. Although the 318ci was still available and it was possible to order the 360ci, the V8s were less popular than before thanks to the fuel crisis. This was the last year for the Chrysler by Chrysler, and production of all VK models ceased after just 20555 vehicles as they did not meet ADR27A (exhaust emission control) which came into effect on 1st of July 1976.

Displaying 201 to 300 (of 459 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]

Product Image	Item Name	Price
	Master Cylinder New item; although we will exchange your old unit if you wish; call us!	$210.00 Add:
	Manifold Washer, Original Triangle Type, Salvaged Unavailable as a factory-correct reproduction, these original salvaged washers feature the concave shape. Suitable for both Slant and Hemi	$5.00 Add:
	Manifold Washer, Original Round Type, Salvaged These original salvaged conical washers are to suit Slant and V8 engines.	$5.00 Add:
	Manifold Stud and Nut Suits all Slant and Hemi engines	$4.50 Add:
	Manifold Gasket To suit 215, 245, 265	$18.00 Add:
	Main Bearings, 360	$85.00 Add:
	Main Bearings 273 / 318 / 340 Clevite brand	$80.00 Add:
	Main Bearing Set, Hemi 6	$72.00 Add:
	Lowering Block Kit, 3" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 2.5" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 2" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 1.5" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lowering Block Kit, 1" Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...	$125.00 Add:
	Lower Tailgate Seal To suit VH - CL Ute	$49.00 Add:
	Lower Tailgate Seal To suit VH - CM Wagon	$80.00 Add:
	Lower Steering Shaft Dust Cover	$9.00 Add:
	Lower Control Arm Bush Pair Urethane Full kit that includes inner and outer metal sleeves	$84.00 Add:
	Lower Control Arm Bump Stop, Urethane Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.	$25.00 Add:
	Lower Ball Joint Rubber Boot An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...	$7.70 Add:
	Lock Knob, Chrome, Hardtop Suits VF - VG Hardtop	$9.00 Add:
	Lock Knob, Black, Hardtop Suits VF - VG Hardtop	$9.00 Add:
	Lock Ferrule Suits all models from AP5 to CM except VF/VG Hardtop. Sold individually.	$19.50 Add:
	Kickdown Linkage Cable Kit, Torqueflite 904 Quality kit with braided sheathing	$110.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 727 Quality kit with braided sheathing	$110.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 30mm These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 27mm These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 25mm These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 24mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 23mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 22mm These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 20mm These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 18mm These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket These are the brackets used to mount the Front Sway Bar to the K-Frame	$25.00 Add:
	J Nut / Panel Nut, 5/16" Nobody likes to have their nuts seized. Here is the solution to the bang noise you just heard when you tried to tighten your panel nuts up	$1.75 Add:
	Interior Trim Panel Clip	$1.00 Add:
	Interior Light Door Switch	$10.50 Add:
	Interior Door Handle, Right, Salvaged Since the frosted type of handle isn't reproduced, your only option to get the correct type is to find some decent salvaged ones. As a bit of a...	$20.00 Add:
	Interior Door Handle, Right, Salvaged To suit Chrysler by Chrysler and upmarket CL/CM. Some pitting in the chrome but at least they are the correct type.	$18.00 Add:
	Interior Door Handle, Right New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different	$48.00 Add:
	Interior Door Handle, Left, Salvaged Since the frosted type of handle isn't reproduced, your only option to get the correct type is to find some decent salvaged ones. As a bit of a...	$20.00 Add:
	Interior Door Handle, Left, Salvaged To suit Chrysler by Chrysler and upmarket CL/CM. Some pitting in the chrome but at least they are the correct type.	$18.00 Add:
	Interior Door Handle, Left New, wrapped in tissue paper to prevent scratching. Physically fits into CL/CM although design is different	$48.00 Add:
	Interior Dome Light Lens	$22.00 Add:
	Instrument Panel T10 Wedge Bulb Standard bulb as used in all dashboard applications requiring push-in wedge type bulbs. Note dashboards may also include other bulb types.	$1.00 Add:
	Instrument Panel Bayonet Bulb Standard bulb as used in all dashboard bayonet applications. Note VF - CM dashboards also include wedge type bulbs	$1.00 Add:
	Indicator Switch Before ordering this product, please note: you may only need the Cancelling Cam, which is much cheaper! If you are having an issue such as the...	$110.00 Add:
	Indicator Steering Wheel Ring A hard-to-find part. If you turn your original steering wheel upside-down you will notice a steel ring encircling the steering shaft spline socket....	$7.00 Add:
	Indicator Flasher Can, Large Type If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models. This is the larger, more elaborate type...	$20.00 Add:
	Indicator Flasher Can, Bosch NOS If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.	$20.00 Add:
	Indicator Flasher Can If your indicators are staying on constantly, here is your solution. Two-pin Flasher Can to suit all models.	$14.00 Add:
	Indicator Cancelling Cam If your indicator refuses to cancel after turning a corner, chances are one of the tabs has broken off. A common problem which is easily fixed with a...	$25.00 Add:
	Ignition Coil, Bosch SU12R For use with Ballast Resistor only. Made in Japan	$39.00 Add:
	Ignition Coil, Bosch GT40R For use with Ballast Resistor	$58.00 Add:
	Idler Arm, Small Bolt Type This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...	$44.00 Add:
	Idler Arm Bush, Small Bolt Type, Rubber This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$10.00 Add:
	Idler Arm Bush, Small Bolt Type, Nolathane This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$24.50 Add:
	Hydraulic Lifters, V8, Salvaged Salvaged, sold individually	$8.00 Add:
	Hydraulic Lifters	$99.00 Add:
	Horn Relay Exact reproduction of factory fitted item for AP5 - VK, suitable for all models from RV1 - CM	$28.00 Add:
	Horn Button Horn Button, salvaged. Removed many years ago so plenty of life left in them yet. Guaranteed to work.	$48.00 Add:
	Hood to Cowl Seal	$48.00 Add:
	Hemi 6 Engine Mount, Right For the driver's side; on your left when you open the bonnet!	$70.00 Add:
	Hemi 6 Engine Mount, Left For the passenger's side; on your right when you open the bonnet!	$70.00 Add:
	Heavy Duty Late Model Ignition Switch Suits all models from VJ to CM as well as late model VH. Wave goodbye to your underengineered factory switch with this heavy duty Ignition Switch...	$185.00 Add:
	Heater Hose and Wiring Grommet To suit all VE-CM fitted with a heater	$20.00 Add:
	Heater Hose and Wiring Blanking Grommet To suit all VE-CM without a heater	$20.00 Add:
	Headlight, High/Low Beam 7" 7" (178mm) diameter to suit: AP5 AP6 VC VE VF VH VJ High/Low Sealed Beam	$20.00 Add:
	Headlight, High/Low Beam 5-3/4" 5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High/Low Sealed Beam	$22.00 Add:
	Headlight, High Beam 5-3/4" 5-3/4" (146mm) diameter to suit: RV1 SV1 VF VIP VG VIP Chrysler by Chrysler CL CM High Beam Single Filament Single Beam	$22.00 Add:
	Headlight Switch Harness, Salvaged Headlight Switch Harness, viciously hacked out of cars wrecked back in the day when it wasn't worthwhile to carefully remove the whole wiring loom;...	$20.00 Add:
	Headlight Switch	$55.00 Add:
	Harmonic Balancer	$110.00 Add:
	Handbrake Cable, Rear, Right The short one	$60.00 Add:
	Handbrake Cable, Rear, Left The long one	$70.00 Add:
	Handbrake Cable Bracket Retainer Clip	$0.50 Add:
	Glass Divider Seal, Right Hand Side To suit VJ-CL Charger and VH-CL Hardtop	$30.00 Add:
	Glass Divider Seal, Left Hand Side To suit VJ-CL Charger and VH-CL Hardtop	$30.00 Add:
	Full Rubber Kit, Wagon	$123,456.00 Add:
	Full Rubber Kit, Ute	$123,456.00 Add:
	Full Rubber Kit, Sedan	$123,456.00 Add:
	Full Rubber Kit, Hardtop	$123,456.00 Add:
	Full Rubber Kit, Chrysler by Chrysler	$123,456.00 Add:
	Full Rubber Kit, Charger	$123,456.00 Add:
	Fuel Tank Strap J-Bolt Correct part for models with J-Bolt. Models which do not use this type of J-bolt may still use this if: the hole in the chassis rail in which the...	$22.00 Add:
	Fuel Tank Sender Seal Suits all models	$9.00 Add:
	Fuel Tank Sender Resistor Card To suit all VJ - VK models except Ute	$48.00 Add:
	Fuel Tank Sender Pickup Filter, Standard To suit all models with standard 5/16" sender tube	$33.00 Add:
	Fuel Tank Sender Pickup Filter, 3/8" To suit only models with fuel sender pickups that have been enlarged to 3/8"	$25.00 Add:
	Fuel Tank Filler Seal This is the seal between the Filler Tube and Tank. Suits AP5 - CM	$20.00 Add:
	Fuel Sender Ground Strap, Stainless Steel Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap. This is the stainless steel...	$22.00 Add:
	Fuel Sender Ground Strap, Spring Steel Suits all models. If your Fuel Gauge is stuck on empty, the problem could be a poor ground through the Ground Strap.	$15.00 Add:
	Fuel Sender Ground Strap, Salvaged Suits all models. If you are missing a Ground Strap and enough money to buy a new one, buy this crusty old one instead and clean it up	$2.00 Add:
	Fuel Pump, 215, 245, 265 Suits VG - CM Hemi. Direct fit for Hemi engines as pictured. Non-serviceable sealed unit	$55.00 Add:
	Fuel Pump Rebuild Kit, Slant or Hemi with Carter Fuel Pump Suits RV1 - CM Slant or Hemi with original Carter Fuel Pump. Quality Australian product. Will not fit the following: Modern sealed Fuel Pump Slant...	$109.00 Add:
	Fuel Pump Rebuild Kit, Hemi/V8 with Email Fuel Pump & Webers Suits VG - CM Hemi/318/340/360 with original Email Fuel Pump AND Weber Carburetors. Quality Australian product. Will not fit the following: Modern...	$115.00 Add:
	Fuel Pump Rebuild Kit, Hemi/V8 with Email Fuel Pump Suits VG - CM Hemi/318/340/360 with original Email Fuel Pump. Quality Australian product. Will not fit the following: Hemi/V8 with Email Fuel Pump...	$115.00 Add:
	Fuel Pump Gasket Suits all models	$2.20 Add:
	Fuel Filler to Body Gasket	$4.00 Add:
	Front Windscreen, Salvaged Salvaged Front Windscreen to suit VH - CM. Good condition with no scratches or chips. There is no way I'll be posting this but it can be couriered or...	$100.00 Add:
	Front Windscreen Seal	$141.00 Add:

Displaying 201 to 300 (of 459 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]