Log In

Home :: CL

CL

Although the CL used the same bodyshell as earlier models, the panels were extensively redesigned for a new look. The CL range now included a panel van and the Regal SE. The base model 215ci Hemi was dropped, as was the 360ci V8. The Drifter pack was available on the Charger, Panel Van and Utility which consisted of spiffy paint and pinstriping combinations. Late production CLs included a suspension package specially suited to radial tyres which significantly improved roadholding and handling. 36672 CLs were built before production ended in late 1978.

Displaying 101 to 200 (of 410 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]

Product Image	Item Name	Price
	Main Bearings 273 / 318 / 340 Clevite brand	$80.00 Add:
	V8 Dual Row Timing Gear and Chain Set Adjustable, Tru-Roller type.	$110.00 Add:
	Conrod Bearing Set, V8	$60.00 Add:
	Camshaft Bearing Set, V8	$50.00 Add:
	Welch Plug Kit, V8 Suits all V8 models. Includes: 1 x 1-1/4", 9 x 1-5/8" and 1 x 1-7/8" brass cup welch plugs, 1 x 3/8" NPT Pipe Plug, and 1 x 1/2" NPT Pipe Plug	$49.50 Add:
	Welch Plug, 1-1/4" 1-1/4", brass. Suits V8	$5.00 Add:
	Welch Plug, 1-7/8" 1-7/8", brass. Suits V8	$5.00 Add:
	Camshaft Plug, V8 Later Dished Type	$9.00 Add:
	Piston Set, Cast, 318, 0.020"	$400.00 Add:
	Pipe Plug, 3/8" NPT 3/8" NPT. Suits V8	$5.00 Add:
	Piston Set, Cast, 318, 0.030"	$400.00 Add:
	Pipe Plug, 1/2" NPT 1/2" NPT. Suits V8	$5.00 Add:
	Piston Set, Cast, 318, 0.040"	$400.00 Add:
	Piston Set, Cast, 318, 0.060"	$400.00 Add:
	Rear Main Seal, V8 Original Rope Type	$35.00 Add:
	Engine Mount, 318/340/360 2x required per car; each side is the same.	$31.00 Add:
	Hydraulic Lifters, V8, Salvaged Salvaged, sold individually	$8.00 Add:
	Clutch Kit, Standard, Hemi Standard Clutch Kit to suit Hemi models. Includes Clutch Plate, Pressure Plate and Thrust Race Bearing.	$250.00 Add:
	Clutch Plate Kit, Twin Plate To suit Hemi or V8 Twin Plate Clutch. Includes both inner and out plates.	$265.00 Add:
	6027467 Automatic Trans Control Rod Washer NOS Automatic Transmission Front Control Rod Washer Gearshift Control Rod (Shifter End) Washer	$6.00 Add:
	3427325 Clutch Release Bearing NOS	$115.00 Add:
	Clutch Fork Adjuster Arm Cushion	$9.00 Add:
	Clutch Rod Washer Restoration-correct part to suit all Manual gearbox models	$17.00 Add:
	Spigot Bush Quality Australian-made sintered bronze product. Suits all manual transmissions.	$11.00 Add:
	Transmission Filter, Linkage Operated Transmission To suit all linkage-operated 904 and 727 TorqueFlite transmissions	$17.00 Add:
	Selector Seal, Post-1966 Torqueflite To suit all TorqueFlite transmissions built after 1966	$5.50 Add:
	Selector Seal, Borg Warner 35 Automatic To suit all Borg Warner Automatic Transmissions	$7.00 Add:
	Clutch Torque Tube Bushing Retainer Clip	$17.00 Add:
	Clutch Pivot Half Moon Bushes Set of 4 Set of 4 Clutch Pivot Bushes	$12.00 Add:
	Clutch Linkage Pivot Ball, Body Side	$22.00 Add:
	Clutch Linkage Pivot Ball, Bellhousing Side	$22.00 Add:
	Clutch Torque Tube Linkage Dust Seals Set of 2 Set of 2 MDI Clutch Torque Tube Linkage Dust Seals	$10.00 Add:
	Bellhousing Clutch Fork Dust Boot Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.	$43.00 Add:
	Clutch Pushrod Firewall Boot	$13.50 Add:
	Clutch Linkage Washer Suits all models	$8.00 Add:
	Clutch Linkage Washer 2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster	$5.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 904 Quality kit with braided sheathing	$110.00 Add:
	Kickdown Linkage Cable Kit, Torqueflite 727 Quality kit with braided sheathing	$110.00 Add:
	Flex Plate, Slant / Hemi with Torqueflite, Salvaged	$50.00 Add:
	Flex Plate, 318 / 340 with Torqueflite, Salvaged	$50.00 Add:
	Rear Extension Housing Seal Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic	$32.00 Add:
	Rear Extension Housing Seal Suits TorqueFlite 727, Borg Warner 4 Speed Manual	$27.00 Add:
	Pump / Converter Seal Suits TorqueFlite 904	$18.50 Add:
	Pump / Converter Seal Suits TorqueFlite 727	$16.00 Add:
	Pump / Converter Seal Suits Borg-Warner 35	$16.00 Add:
	2538695 Torqueflite Rear Clutch Piston Seal Outer NOS To suit: VF, VG, VH, VK and... VE with 273 from engine number VE6-2288 and up VE with 225 with 2bbl carburettor and engine number prefix of LVE8D VE...	$14.00 Add:
	Transmission / Gearbox Mount To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...	$49.00 Add:
	Shifter Saddle Bush, 4 Speed	$8.00 Add:
	Selector Seal, Borg Warner 3-Speed & 4-Speed (Rear) To suit Borg Warner 3 Speed Manual Gearboxes for AP5 - early VF and as a Rear Selector Seal for Borg Warner 4 Speed Manual Gearboxes	$6.00 Add:
	Selector Seal O-Ring, Borg Warner 3-Speed To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models	$2.00 Add:
	Selector Seal, Borg Warner 3-Speed To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models	$18.00 Add:
	Selector Shaft Front Seal, Borg Warner 4-Speed To suit Borg Warner 4 Speed Manual Gearboxes	$2.00 Add:
	1630878 Gearbox Bearing Thrust Washer NOS 2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM	$7.00 Add:
	2792682 Rear Inner Gearbox Thrust Washer NOS To suit all models of 3 Speed Manual Gearboxes from VC - CM. May also suit Centura	$15.00 Add:
	Speedometer Cable To suit Borg Warner 35 Automatic and 3 & 4 speed Manual. Includes Firewall Grommet	$118.00 Add:
	Front Wheel Bearing Kit Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all VK - CM models with front disc brakes	$29.00 Add:
	1615340 Wheel Bearing, Inner NOS VG - CM	$20.00 Add:
	Front Axle Hub Seal Front Axle Hub Seal to suit all models from VG-CM. You do not need to purchase this item if you are buying the Front Wheel Bearing Kit as it is...	$7.70 Add:
	2808269 Disc Brake Hub Dust Seal NOS	$18.00 Add:
	Front Wheel Inner Bearing	$12.00 Add:
	Front Wheel Outer Bearing	$12.00 Add:
	Front Shock Absorber Upper Bushes, Pair Genuine Mackay, Australian made. Includes inner tubes.	$80.00 Add:
	Front Shock Absorber Lower Bush Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...	$13.80 Add:
	Lower Control Arm Bush Pair Urethane Full kit that includes inner and outer metal sleeves	$84.00 Add:
	Lower Control Arm Bump Stop, Urethane Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.	$25.00 Add:
	Upper Control Arm Bump Stops, MDI, Pair Includes nuts and washers.	$30.00 Add:
	Upper Control Arm Bush, Rubber Quality Australian-made Mackay Rubber product. 4 required per car	$15.00 Add:
	Upper Control Arm Bush, Polyurethane Nolathane or Moog brand	$17.00 Add:
	Upper Control Arm Offset Bolts Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.	$40.00 Add:
	Ball Joint, Lower, Right Hand Suits all models, excluding those fitted with solid disc brakes	$43.00 Add:
	Ball Joint, Lower, Left Hand Suits all models, excluding those fitted with solid disc brakes. Wasp brand	$49.00 Add:
	Lower Ball Joint Rubber Boot An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...	$7.70 Add:
	Upper Ball Joint Suits all models except RV1.	$24.00 Add:
	Upper Ball Joint Rubber Boot If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.	$5.75 Add:
	Tie Rod End, R/H thread Suits all Valiant models except R Series For R/H outer and L/H inner	$16.50 Add:
	Tie Rod End, L/H thread Suits all Valiant models except R Series For L/H outer and R/H inner	$16.50 Add:
	Tie Rod End Rubber Boot If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer	$5.85 Add:
	Idler Arm, Small Bolt Type This is the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models which...	$44.00 Add:
	Idler Arm Bush, Small Bolt Type, Rubber This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$10.00 Add:
	Idler Arm Bush, Small Bolt Type, Nolathane This is to suit the small bolt type which was used for all models from RV1 to VK and some CL models. Other CL and CM models, and any earlier models...	$24.50 Add:
	Radius Rod Bushes Sold as a pair, includes Crush Tubes	$44.00 Add:
	Pitman Arm, Manual Steering To suit models without power steering. 5 year, 100000km warranty.	$55.00 Add:
	Pitman Arm, Power Steering To suit models with power steering. 5 year, 100000km warranty.	$55.00 Add:
	Sway Bar Links and Rubbers Suits all models	$49.00 Add:
	K-Frame Sway Bar Mounting Bracket These are the brackets used to mount the Front Sway Bar to the K-Frame	$25.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 18mm These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 20mm These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 22mm These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 23mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 24mm These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 25mm These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 27mm These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	K-Frame Sway Bar Mounting Bracket Bush, 30mm These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame	$17.00 Add:
	Steering Box Lower Oil Seal Suits manual Steering Box	$35.00 Add:
	Steering Box Upper Oil Seal Suits manual Steering Box	$15.00 Add:
	Steering Coupling Repair Kit Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.	$32.00 Add:
	Lower Steering Shaft Dust Cover	$9.00 Add:
	Torsion Bar Seals Pair of MDI Seals. Suits all models	$26.00 Add:
	Disc Pad Set Full set of pads to suit VJ - Early CL disc brakes	$25.00 Add:
	3714461 Front Disc Caliper Seals NOS To suit VJ - Early CL Includes Large Dust Seal and 2 Small Bolts	$10.00 Add:

Displaying 101 to 200 (of 410 auto parts)

[<< Prev] 1 2 3 4 5 [Next >>]