Product Image
Item Name
Price
Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.
$32.00 Add:
Suits all models
$1.50 Add:
Suits all models
$49.00 Add:
To suit all 6 cylinder models
$4.50 Add:
Opening temp = 82 degrees
$13.20 Add:
If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer
$5.85 Add:
Pair of MDI Seals. Suits all models
$26.00 Add:
To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...
$49.00 Add:
To suit all Valiant models except those with Sure-Grip Limited Slip Diffs
$22.00 Add:
Includes nuts and washers.
$30.00 Add:
Nolathane or Moog brand
$17.00 Add:
Quality Australian-made Mackay Rubber product. 4 required per car
$15.00 Add:
Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.
$40.00 Add:
Suits all models. Order 12x for Hemi or Slant, 16x for V8
$3.00 Add:
NOS Bosch RE55 Voltage Regulator. In storage for over 20 years, this Australian-made unit has been waiting long enough to become part of your project!
$45.00 Add:
1-5/8", brass. Suits Slant, Hemi and V8 models
$5.00 Add:
1-5/8", brass. Suits Slant, Hemi and V8 models
$5.00 Add:
Gasket that goes under the Wheel Cylinder. Suits all models
$4.00 Add:
Includes flat washer
$2.50 Add:
$2.00 Add:
$2.00 Add:
To suit all models. Generic, inoffensive-looking assembly; kit includes everything from button to nozzles
$32.00 Add:
$3.00 Add:
$3.00 Add:
Black OEM-style wiring harness tape, as per original
$15.00 Add:
This is a set of 4 Brake Shoes to do both rear brakes. Does not fit Late CL 10" drums
$50.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
Top quality Nolathane brand lowering block kit including U-bolts, extended nuts, washers, and extruded (not the cheaper cast type) blocks. Hey, they...
$125.00 Add:
To suit all models from late VG to CM
$74.00 Add:
To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models
$2.00 Add:
To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models
$18.00 Add:
This is a set of 4 Brake Shoes to do both rear 10" brakes on a Late CL - CM
$55.00 Add:
Caliper Kit to rebuild one Late CL - CM Caliper.
$95.00 Add:
Full set of pads to suit Late CL - CM disc brakes
$60.00 Add:
$123,456.00 Add:
To suit CL Panel Van
$49.00 Add:
To suit CL Panel Van
$97.00 Add:
$18.00 Add:
$18.00 Add:
To suit all 10" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$42.00 Add:
$59.00 Add:
$7.50 Add:
Has a crack but good driver quality
$18.00 Add:
$260.00 Add:
Genuine Australian-made PBR product
$35.00 Add:
$55.00 Add:
$220.00 Add:
$18.00 Add:
$16.50 Add:
$8.00 Add:
To suit 10" Brake Drums
$27.50 Add:
$15.00 Add:
NOS Bosch GB611 Bush to suit the Drive End of all models built from October of 1977
$10.00 Add:
To suit all CL models except Ute
$48.00 Add:
To suit Chrysler by Chrysler and upmarket CL/CM. Some pitting in the chrome but at least they are the correct type.
$18.00 Add:
To suit Chrysler by Chrysler and upmarket CL/CM. Some pitting in the chrome but at least they are the correct type.
$18.00 Add:
To suit Chrysler by Chrysler
$123,456.00 Add:
To suit all Small Blocks. Made from aluminium billet
$90.00 Add:
Denso Brand
$50.00 Add:
Restoration correct, featuring the correct colours and lettering to the originals
$82.00 Add:
Adjustable, Tru-Roller type.
$110.00 Add:
Suits 273 and 318
$6.00 Add:
Includes gasket.
$85.00 Add:
Includes gasket. May be used on 273 engines when using 318 Alloy Timing Case.
$100.00 Add:
Includes gasket. May be used on 273 engines when using 318 Alloy Timing Case.
$150.00 Add:
We have recently come across a number of original V8 Water Pumps which have been rebuilt to high volume specifications (ie; 8 blades) decades ago by...
$175.00 Add:
$50.00 Add:
$60.00 Add:
$110.00 Add:
Salvaged, sold individually
$8.00 Add:
Clevite brand
$80.00 Add:
Salvaged Oil Pump Drive Gear to suit Small Block
$50.00 Add:
1/2" NPT. Suits V8
$5.00 Add:
3/8" NPT. Suits V8
$5.00 Add:
Suits TorqueFlite 727, Borg Warner 4 Speed Manual
$27.00 Add:
Original Rope Type
$35.00 Add:
Thermostat to suit all small blocks
$16.50 Add:
To suit all linkage-operated 904 and 727 TorqueFlite transmissions
$17.00 Add:
Suits all V8 models. Includes: 1 x 1-1/4", 9 x 1-5/8" and 1 x 1-7/8" brass cup welch plugs, 1 x 3/8" NPT Pipe Plug, and 1 x 1/2" NPT Pipe Plug
$49.50 Add:
1-1/4", brass. Suits V8
$5.00 Add:
1-7/8", brass. Suits V8
$5.00 Add:
To suit Borg Warner 3 Speed Manual Gearboxes for AP5 - early VF and as a Rear Selector Seal for Borg Warner 4 Speed Manual Gearboxes
$6.00 Add:
Sticker as applied to dealer-fitted batteries
$18.00 Add:
To suit AP5 - CM Quality digital print
$6.50 Add:
Suits AP5 - CM. Quality rubber product made by an automotive OEM. By buying directly from the factory we have managed to cut out the middleman and...
$1.65 Add:
Fits VE - VG; may also fit other models with some trimming. Includes cutout to fit 6" speakers. A professional-looking way to add speakers without...
$220.00 Add:
Fits VE - VG; may also fit other models with some trimming. Includes Custom Autosound 80W speakers. A professional-looking way to add speakers...
$248.00 Add:
This is the seal between the Filler Tube and Tank. Suits AP5 - CM
$20.00 Add:
Suits all models from AP5 to CM except VF/VG Hardtop. Sold individually.
$19.50 Add:
Quality Ryco Z9
$12.00 Add:
$1.00 Add:
NOS Bosch GB672 Bush to suit the Non Drive End of the Starter Motor of all models from AP5 - CM
$10.00 Add:
Suits any Slant or Hemi with 2BBL or 4BBL Carburetor
$53.00 Add:
Quality Wiper Spring to suit AP5 - CM
$16.00 Add:
To suit all TorqueFlite transmissions built after 1966
$5.50 Add:
To suit Hardtop
$66.00 Add:
To suit Charger
$66.00 Add: