Product Image
Item Name
Price
$400.00 Add:
3/8" NPT. Suits V8
$5.00 Add:
$400.00 Add:
1/2" NPT. Suits V8
$5.00 Add:
$400.00 Add:
$400.00 Add:
Original Rope Type
$35.00 Add:
2x required per car; each side is the same.
$31.00 Add:
Salvaged, sold individually
$8.00 Add:
Standard Clutch Kit to suit Hemi models. Includes Clutch Plate, Pressure Plate and Thrust Race Bearing.
$250.00 Add:
To suit Hemi or V8 Twin Plate Clutch. Includes both inner and out plates.
$265.00 Add:
Automatic Transmission Front Control Rod Washer Gearshift Control Rod (Shifter End) Washer
$6.00 Add:
$115.00 Add:
$9.00 Add:
Restoration-correct part to suit all Manual gearbox models
$17.00 Add:
Quality Australian-made sintered bronze product. Suits all manual transmissions.
$11.00 Add:
To suit all linkage-operated 904 and 727 TorqueFlite transmissions
$17.00 Add:
To suit all TorqueFlite transmissions built after 1966
$5.50 Add:
To suit all Borg Warner Automatic Transmissions
$7.00 Add:
$17.00 Add:
Set of 4 Clutch Pivot Bushes
$12.00 Add:
$22.00 Add:
$22.00 Add:
Set of 2 MDI Clutch Torque Tube Linkage Dust Seals
$10.00 Add:
Suits both 3 and 4 Speed Gearboxes. Made from rubber, not nolathane.
$43.00 Add:
$13.50 Add:
Suits all models
$8.00 Add:
2 required for joint between Z-Tube and Pedal, 1 required between Z-Tube and Clutch Fork Adjuster
$5.00 Add:
Quality kit with braided sheathing
$110.00 Add:
Quality kit with braided sheathing
$110.00 Add:
$50.00 Add:
$50.00 Add:
6 per car. Suits all models.
$4.50 Add:
Suits TorqueFlite 904, Borg Warner 3 Speed Manual, Borg Warner 35 Automatic
$32.00 Add:
Suits TorqueFlite 727, Borg Warner 4 Speed Manual
$27.00 Add:
Suits TorqueFlite 904
$18.50 Add:
Suits TorqueFlite 727
$16.00 Add:
Suits Borg-Warner 35
$16.00 Add:
To suit: VF, VG, VH, VK and... VE with 273 from engine number VE6-2288 and up VE with 225 with 2bbl carburettor and engine number prefix of LVE8D VE...
$14.00 Add:
To suit all models, auto or manual; note that this product is imported from the US so only features one thread, not two. Australian mounts were...
$49.00 Add:
$8.00 Add:
To suit Borg Warner 3 Speed Manual Gearboxes for AP5 - early VF and as a Rear Selector Seal for Borg Warner 4 Speed Manual Gearboxes
$6.00 Add:
To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models
$2.00 Add:
To suit all Borg Warner 3 Speed Manual Gearboxes from Late VF models
$18.00 Add:
To suit Borg Warner 4 Speed Manual Gearboxes
$2.00 Add:
2 per car required for RV1-SV1, 3 required for VC-VG Also fits VH - CM
$7.00 Add:
To suit all models of 3 Speed Manual Gearboxes from VC - CM. May also suit Centura
$15.00 Add:
To suit Borg Warner 35 Automatic and 3 & 4 speed Manual. Includes Firewall Grommet
$118.00 Add:
Kit is for one wheel and includes: Inner Bearing, Outer Bearing, Seals Suits all VK - CM models with front disc brakes
$29.00 Add:
VG - CM
$20.00 Add:
Front Axle Hub Seal to suit all models from VG-CM. You do not need to purchase this item if you are buying the Front Wheel Bearing Kit as it is...
$7.70 Add:
$18.00 Add:
$12.00 Add:
$12.00 Add:
Genuine Mackay, Australian made. Includes inner tubes.
$80.00 Add:
Lower Shock Absorber Bush as fitted to base of front shock absorber. An affordable alternative to replacing one of your front shocks if the only...
$13.80 Add:
Full kit that includes inner and outer metal sleeves
$84.00 Add:
Lower than original profile so you can turn that torsion bar adjustment bolt a few more times! Sold individually. Includes nut.
$25.00 Add:
Includes nuts and washers.
$30.00 Add:
Quality Australian-made Mackay Rubber product. 4 required per car
$15.00 Add:
Nolathane or Moog brand
$17.00 Add:
Used to adjust camber and caster. One set is enough to do both sides of 1 Upper Control Arm.
$40.00 Add:
Suits all models, excluding those fitted with solid disc brakes
$43.00 Add:
Suits all models, excluding those fitted with solid disc brakes. Wasp brand
$49.00 Add:
An affordable alternative to buying new lower ball joints if the only problem with your existing ones is perishing rubber. Suits all models,...
$7.70 Add:
Suits all models except RV1.
$24.00 Add:
If your Upper Ball Joint is fine but the rubber boot has perished, fit a new rubber boot and save around $20 per side. Suits all models except RV1.
$5.75 Add:
Suits all Valiant models except R Series For R/H outer and L/H inner
$16.50 Add:
Suits all Valiant models except R Series For L/H outer and R/H inner
$16.50 Add:
If your Tie Rod Ends are fine but the boot is perished, here is your affordable answer
$5.85 Add:
Sold as a pair, includes Crush Tubes
$44.00 Add:
To suit models without power steering. 5 year, 100000km warranty.
$55.00 Add:
To suit models with power steering. 5 year, 100000km warranty.
$55.00 Add:
Suits all models
$49.00 Add:
These are the brackets used to mount the Front Sway Bar to the K-Frame
$25.00 Add:
These are the bushes to suit the aftermarket brackets used to mount an 18mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 20mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 22mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 23mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 25mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 27mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
These are the bushes to suit the aftermarket brackets used to mount a 30mm diameter Front Sway Bar to the K-Frame
$17.00 Add:
Suits manual Steering Box
$35.00 Add:
Suits manual Steering Box
$15.00 Add:
Steering Shaft to Steering Box Coupling Repair Kit. Take the play out of your steering and make your steering more responsive. Fits all models.
$32.00 Add:
$9.00 Add:
Pair of MDI Seals. Suits all models
$26.00 Add:
Full set of pads to suit Late CL - CM disc brakes
$60.00 Add:
$55.00 Add:
Genuine Australian-made PBR product
$35.00 Add:
$260.00 Add:
$220.00 Add:
Top quality hose, made in Australia and individually tested to 3000psi. Hoses are made to your order: please e-mail us after placing an order if you...
$55.00 Add:
This is a set of 4 Brake Shoes to do both rear 10" brakes on a Late CL - CM
$55.00 Add:
$15.00 Add:
Gasket that goes under the Wheel Cylinder. Suits all models
$4.00 Add:
To suit all 9" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$36.00 Add:
To suit all 10" drum brakes. Kit includes springs and clips to suit one pair of drum brakes
$42.00 Add:
All models except Charger. Exchange Required.
$120.00 Add: